Please wait a minute...
材料研究学报  2008, Vol. 22 Issue (6): 664-672    
  研究论文 本期目录 | 过刊浏览 |
火焰法高钴YG系硬质合金表面沉积复合碳材料
唐德文1;成晓玲1;匡同春2†;王成勇1
1.广东工业大学机电学院 广州 510410
2.华南理工大学实验中心 广州 510080
Deposit carbon coatings on high Co YG cemented carbide with combustion flame
 TANG Dewen1; CHENG Xiaoling1; KUANG Tongchun2†; WANG Chengyong1
1.School of Electrical and Mechanical Engineering; Guang Dong University of Technology; GuangZhou 510090
2.Experiment Center; South China University of Technology; Guangzhou 510641
引用本文:

唐德文 成晓玲 匡同春 王成勇. 火焰法高钴YG系硬质合金表面沉积复合碳材料[J]. 材料研究学报, 2008, 22(6): 664-672.
, , , . Deposit carbon coatings on high Co YG cemented carbide with combustion flame[J]. Chin J Mater Res, 2008, 22(6): 664-672.

全文: PDF(1762 KB)  
摘要: 

用C2H2与O2火焰在高钴YG系硬质合金基体上沉积复合的碳材料,并分别对酸蚀脱钴预处理的 YG8、YG16硬质合金基体表面进行火焰法沉积研究;用扫描电镜SEM、XRD射线衍射谱、 Raman光谱、原子力显微镜等手段分析了复合碳涂层的组织结构、涂层的质量以及涂层横截面. 结果表明: 不同时间脱钴处理后的YG8硬质合金表面经火焰沉积后,在表面分别形成了典型的“菜花状”球形金刚石、碳纳米管以及金刚石、石墨和非晶碳复合而成的碳涂层; 经20 min 脱钴处理的YG16硬质合金表面沉积的碳涂层则以碳纳米管为主.

关键词 功能材料 金刚石 碳纳米管 火焰法 YG8硬质合金 YG16硬质合金    
Abstract

C2H2 and O2 of flame was used to deposit carbon coatings on high Co YG series cemented carbide surface. the influence of acid corroded Co YG8, YG16 and deposition time have been investigated With the method of XRD, SEM, Raman and atomic microscope, carbon coatings structure, quality and Cross sectional microstructures of carbon coating was analyzed. The experimental result show that after different acid corroded Co time, the typical diamond/nanometer carbon tube and diamond-graphite-no crystal carbon coatings have been formed on the cemented carbide YG8 surface; after acid corroded Co 20 time, nanometer carbon tube has been mainly formed on the cemented carbide YG16 surface

Key wordsfunctional materials    diamond    carbon nanotubes    flame    Yg8cemented carbide    Yg16cemented carbide
收稿日期: 2008-03-26     
ZTFLH: 

TB34

 
基金资助:

广东省自然科学基金(2004B10301032)

1 YAN Chunhui, KUANG Tongchun, BAI Xiaojun, CHENG Xiaoling, Surface modification of WC–20% (Fe/Co/Ni) cemented carbide, Cemented carbide, 18(3), 134 (2001)
(晏春晖, 匡同春, 白晓军, 成晓玲, WC-20%(Fe/Co/Ni)硬质合金的表面改性处理, 硬质合金, 18(3), 134(2001))
2 Sahoo B, Chattopadhyay A K, On effectiveness of various surface treatments on adhesion of HF CVD diamond coatings to tungsten inserts, Diamond and related Materials, 11, 1660(2002)
3 YANG Li, YU Zhi-ming, YIN Lei, Effect of cobaltetched treatment on the adhesion between diamond films and WC-Cocemented carbide, China Surface Engineering, 16(6), 16(2003)
4 YANG Li, YU Zhi-ming, YIN Lei, Effect of various surface treatment on diamond films on WC–6%Co , The Chinese Journal of Nonferrous Metals, 14(3), 429(2004)
5 HUANG Yangfeng, MA Zhibin, WANG Jianhua, Effect of copper and Cu/Ti intermediate layer on adhesion of diamond film, Materials Protection, 36(11), 16(2003)
(黄扬风, 马志斌, 汪建华, Cu和Cu/Ti过渡层对金刚石薄膜附着力的影响, 材料保护, 36(11), 16(2003))
6 ZHANG Yuying, LAI Qingmin, MIAO Jinqi, Vacuum boronizing pretreatment for adhesion enhancement of CVD diamond coatings on YG6 cutters, Diamond & Abrasive Engineering, 3, 548(2005)
(张玉英, 来清民, 苗晋琦, YG6金刚石涂层刀片衬底真空硼化处理新技术研究, 金刚石与磨料磨具工程, 3, 548(2005))
7 WANG Yong, MA Yuping, SUN Fanghong, Influence on the performance of CVD diamond films by boronizing on smooth cobalt-cemented tungsten carbide, Chinese Mechanical Engineering, 17(5), 545(2006)
(王勇, 马玉平, 孙方宏, 光滑硬质合金衬底渗硼预处理对CVD金刚石薄膜性能的影响, 中国机械工程,17(5), 545(2006))
8 WANG Chuanxin, WANG Jianhua, MAN Weidong, Effects of W diffusion barrier layer for diamond coatings deposited on WC2Co substrates, Chinese Journal of High Pressure Physics, 18(1), 83(2004)
(王传新, 汪建华, 满卫东, W过渡层结合界面对金刚石薄膜在WC-6%Co上的附着力的影响, 高压物理学报, 18(1), 83(2004))
9 Deuerler F, Woehrl N, Buck V, Characterisation of nanostructured diamond coatings on various hardmetal surfaces, International Journal of Refractory Metals & Hard Materials, 24, 392(2006)
10 WEI Qiuping, YU Zhiming, MA Li, YOU Xiaolong, Effect of ambient pressure on diamond films on boronized WC- 13% Co substrates, The Chinese Journal of Nonferrous Metals, 17(5), 775(2007)
(魏秋平, 余志明, 马莉, 游小龙, YG13硼化处理后沉积气压对金刚石薄膜的影响, 中国有色金属学报, 17(5), 775 (2007))
11 MA Guojia, DENG Xinlu, Diamond- like carbon film and its application s and preparation, Vacuum, 5, 27(2002)
(马国佳, 邓新绿, 类金刚石膜的应用及制备, 真空, 5, 27(2002))
12 Saenger, K.L. Grill, A. Schrott, A.G. et, al, Etch stop and electrical properties of Si-containing diamond-like carbon, Proceedings of Advanced Metallization and Interconnect Systems for ULSI Applications in 1996, 6, 499(1997)
13 Kapil, R.Mehta, B.R.Vankar V.D, Growth of 8H polytype of diamond using cyclic growth etch oxy-acetylen flame setup, Thin Solid Film, 312, (1998)
14 Sun, L.F.Mao, J.M.Pan, Z.W, Growth of straight nanotubes with a cobalt-nickel catalyst by chemical vapor deposition, Applied Physics Letters, 74(5), 644(1999)
15 Hiura, H.Ebbesen, T.W.Tanigaki, K, Raman studies of carbon nanotubes, Chemical Physics Letters, 202(6), 509(1993)
16 Ponsonnet, L.Donnet, Grill.A, EELS analysis of hydrogenated diamond-like carbon films, Thin Solid Films, 319(1-2), 97(1998)
17 Kulisch, W.Reinke, S.Modeling of c-BN thin film deposition, Diamond Films and echnology, 7(2), 105(1997)

[1] 赵超锋, 郑小燕, 李凯瑞, 贾世奎, 张明, 黎业生, 吴子平. 碳纳米管膜表面金属化用于高电流输出柔性锂离子电池[J]. 材料研究学报, 2022, 36(5): 373-380.
[2] 邵思武, 郑宇亭, 安康, 黄亚博, 陈良贤, 刘金龙, 魏俊俊, 李成明. 偏压技术在金刚石薄膜制备中应用的进展[J]. 材料研究学报, 2022, 36(3): 161-174.
[3] 崔丽, 孙丽丽, 郭鹏, 马鑫, 王舒远, 汪爱英. 沉积时间对聚醚醚酮表面类金刚石薄膜的结构和性能的影响[J]. 材料研究学报, 2022, 36(11): 801-810.
[4] 熊文文, 何嵩, 郑淞生, 程其进, 沈宏勋, 陈朝. RF-PECVD法制备类金刚石薄膜[J]. 材料研究学报, 2021, 35(2): 154-160.
[5] 朱晓宇, 邱红芳, 陈平. Co@CNT复合电磁波吸收剂的制备及其吸波性能[J]. 材料研究学报, 2021, 35(11): 811-819.
[6] 杨亚威, 常书龙, 上媛媛. 疏水可拉伸碳纳米管/聚二甲基硅氧烷复合薄膜的性能[J]. 材料研究学报, 2021, 35(10): 795-800.
[7] 张明, 王志勇, 罗琴, 代正昆, 黎业生, 吴子平. 基于高活性碳纳米管海绵体载硫的锂硫电池[J]. 材料研究学报, 2021, 35(1): 65-71.
[8] 刘芝君, 李之锋, 王春香, 谢光明, 黄庆研, 钟盛文. 四氧化三钴/碳纳米管薄膜的水热合成及其储锂性能[J]. 材料研究学报, 2020, 34(8): 584-590.
[9] 陈玮,聂艳艳,孙晓刚,李旭,王杰,胡浩,梁国东,黄雅盼,魏成成. 预嵌锂多壁碳纳米管的性能[J]. 材料研究学报, 2019, 33(5): 371-378.
[10] 张淑文,张杰,王贵春,高丹盈. 碳纳米管对水泥基材料热膨胀性能的影响[J]. 材料研究学报, 2019, 33(5): 387-393.
[11] 王宜豹,黄楠,刘鲁生,袁子尧,李鹏,张文雪,姜辛. 加工7075航空铝合金用金刚石涂层刀具的制备及其切削性能[J]. 材料研究学报, 2019, 33(1): 15-26.
[12] 王延相, 苏顺生, 范汶鑫, 秦建杰, 瞿策, 王成国. 加载金属催化剂在碳纤维表面生长多尺度碳纳米管增强体[J]. 材料研究学报, 2018, 32(7): 495-501.
[13] 张瑾, 王宁, 赵冲, 李佳星, 张天驰. 可植入式医疗设备电池材料钒酸银的合成和性能[J]. 材料研究学报, 2018, 32(7): 555-560.
[14] 刁加加, 常春蕊, 张志明, 张好强, 孙红婵, 安立宝. 金掺杂降低碳纳米管接触电阻的实验研究[J]. 材料研究学报, 2017, 31(7): 511-517.
[15] 杨文申,郎林,阴秀丽,吴创之. 用低温加氢裂解法在AFI分子筛孔道中制备单壁碳纳米管的影响因素[J]. 材料研究学报, 2017, 31(6): 401-409.