Please wait a minute...
材料研究学报  2008, Vol. 22 Issue (5): 515-520    
  论文 本期目录 | 过刊浏览 |
Ni-Al-Re/Ru合金的层错能
于兴福;田素贵;王明罡;尚丽娟;崔树森
沈阳工业大学 材料科学与工程学院
;
沈阳工业大学 材料科学与工程学院
引用本文:

于兴福; 田素贵; 王明罡; 尚丽娟; 崔树森 . Ni-Al-Re/Ru合金的层错能[J]. 材料研究学报, 2008, 22(5): 515-520.
, , , , . [J]. Chin J Mater Res, 2008, 22(5): 515-520.

全文: PDF(1228 KB)  
摘要: 使用置换原子计算层错能的热力学模型计算了Ni--Al--Re(Ru)合金的层错能, 研究了合金元素和温度对层错能的影响. 结果表明:随着温度的提高, Ni-Al-Re(Ru)合金的层错能增加. Ni-6%Al-4%Re合金的层错能随着温度的提高线性增加. Ni-6%Al-4%Ru合金的层错能, 在温度低于500℃时随着温度的提高呈抛物线规律增加, 高于500℃时随着温度的提高呈线性规律增加. Al原子可明显降低Ni-6%Al-4%Re(Ru)合金的层错能. 随着Al含量的提高, 原子偏聚自由能(ΔGγ→ε s)降低, 使Al原子自发偏聚, 并促进γ’有序相的形成和数量的增加, 是合金层错能降低的主要原因. 而Ru原子降低合金的偏聚自由能, 可提高γ’有序相的稳定性. 随着温度的升高, 原子偏聚引起的自由能(ΔGγ→ε s) 增加可抑制原子偏聚; 当温度高于 500℃时, 含Ru合金有比Ni--Al--Re合金高的原子偏聚自由能 (ΔGγ→ε s), 故元素Ru能抑制原子的偏聚和TCP相的析出.
关键词 材料科学基础学科Ni基合金    
Key words
收稿日期: 2007-07-16     
ZTFLH:  TG111  
1 RONG Yonghua,MENG Qingping,HE Gang,XU Zuyao, Calculation of the stacking fault energies of Fe-Mn al- loys by embedded atom method,Journal of Shanghai Jiao Tong University,37(2),171(2003) (戎咏华,孟庆平,何刚,徐祖耀,Fe-Mn合金层错能的嵌入原子法计算,上海交通大学学报,37(2),171(2003))
2 D.M.Knowles,Q.Z.Chen,Superlattice stacking fault for- mation and twinning during creep inγ/γ' single crystal superalloy CMSX-4,Materials Science and Engineering, A340,SS(2003)
3 M.Legros,N.Cle'ment,P.Caron,In-situ observation of deformation micromechanisms in a raftedγ/γ' superal- loy at 850℃,Materials Science and Engineering,A337, 160(2002)
4 S.Gourdet,F.Montheillet,Effects of dynamic grain bound- ary migration during the hotcompression of high stacking fault energy metals,Acta Materialia,50,2801(2002)
5 H.P.Karnthaler,E.Muehlbacher,C.Rentenberger,The in- fluence of the fault energies on the anomalous mechanical behaviour of Ni3Al alloys,Acta Materialia,44,547(1996)
6 ZHANG Jianmin,WU Xijun,HUANG Yuhong,En- ergy calculation of the stacking fault in fcc metals by embedded-atom method,Acta Physica Sinica,55(1), 387(2006) (张建民,吴喜军,黄育红,fcc金属层错能的EAM法计算.物理学报,55(1),387(2006))
7 LIU Xiangjun,LIN Xinyuan,CHEN Shiyin,Stacking fault energy calculation of two kinds of stacking iron based shape memory alloys,Acta Metallurgica Sinica,34(9), 903(1998) (刘向军,林信远,陈士银,两种不绣铁基形状记忆合金层错能的计算,金属学报,34(9),903(1998))
8 HE Gang,XU Erdong,RONG Yonghua,On the determi- nation of the stack ing-fault probability by X-ray diffract ion in Fe-M n-Si shape memory alloy,Functional Materi- als,30(2),155(1999) (何刚,许二冬,戎咏华,X射线衍射法测定Fe2Mn2Si形状记忆合金层错几率的研究,功能材料,30(2),155(1999))
9 HE Gang,ZHAO Hengbei,RONG Yonghua,Peak-shift method on stacking fault probability determination and its application on Fe-Mn-Si alloys,Journal of Shanghai Jiaotong University,33(7),765(1999) (何刚,赵恒北,戎咏华,层错几率峰位移测定法及在Fe_2Mn_2Si合金中的应用,上海交通大学学报,33(7),765(1999))
10 WAN Jianfeng,CHEN Shipu,XU Zuyao,Thermodynam- ical calculation of the stacking fault energy in Fe-30Mn- 6Si-xN shape memory alloys,Acta Metallurgica Sinica, 36,679(2000) (万见峰,陈世朴,徐祖耀,Fe-30Mn-6Si-xN形状记忆合金层错能的热力学计算,金属学报,36,679(2000))
11 K.Yutaka,K.Toshiharu,Y.Tadaharu,Development of next-generation Ni-base single crystal superalloys,In: K.A.Green,T.M.Pollock,H.Harada,Superalloy 2004 (Champion,TMS,2004) p.35
12 K.Wander,U.Glatzel,Chemical composition measure- ments of nickel-base superalloy by atom probe field mi- croscopy,Mater.Sci.Eng.,A203,69(1995)
13 R.Darolia,D.F.Lahrman,R.D.Field,Formation of topo- logically closed packed phases in nickel base single crys- tal superalloys,In:S.Reichman,D.N.Duhl,G.Maurer, S.Antolovich,C.Lund,Superalloy 1988 (Champion,TMS, 1988) p.255
14 T.Ericsson,On the Suzuki effect and spinodal decomposi- tion,Acta Metall.,14,1073(1966)
15 A.T.Dinsdale,SGTE data for pure elements,Calphad,15, 317(1991)
16 K.C.Chou,W.C.Li,F.S.Li,Formalism of new ternary model expressed in terms of binary regular-solution type parameters,Calphad,20,395(1996)
17 LU Guimin,LE Qizhi,CUI Jianzhong,Thermodynamic Properties of Binary alloys of Zn-Mn and Zn-Till,The Chinese Journal of Nonferrous Metals,11,95(2001) (路贵民,乐启炽,崔建忠,Zn-Mn和Zn-Ti二元合金热力学性质,中国有色金属学报,11,95(2001))
18 A.R.Miedema,P.F.Chatel,F.R.Boer,Cohesion in alloy- fundamentals of a semi-empirical model,Physica,100b, 1(1980)
19 XU Zuyao,LI Lin,The Thermodynamics of Material (Bei- jing,Science Publish Corporation,2001) p.44 (徐祖耀,李麟,材料热力学(北京,科学出版社,2001)p.44)
20 R.Burgel,J.Grossmann,Development of a new alloy for directional solidification of large industrial gas turbine blades,in:K.A.Green,T.M.Pollock,H.Harada,Superal- loys 2004 (Champion,TMS,2004) p.25
[1] 杨栋天, 熊良银, 廖洪彬, 刘实. 基于热力学模拟计算的CLF-1钢改良设计[J]. 材料研究学报, 2023, 37(8): 590-602.
[2] 姜水淼, 明开胜, 郑士建. 晶界偏析以及界面相和纳米晶材料力学性能的调控[J]. 材料研究学报, 2023, 37(5): 321-331.
[3] 孙艺, 韩同伟, 操淑敏, 骆梦雨. 氟化五边形石墨烯的拉伸性能[J]. 材料研究学报, 2022, 36(2): 147-151.
[4] 谢明玲, 张广安, 史鑫, 谭稀, 高晓平, 宋玉哲. Ti掺杂MoS2薄膜的抗氧化性和电学性能[J]. 材料研究学报, 2021, 35(1): 59-64.
[5] 岳颗, 刘建荣, 杨锐, 王清江. Ti65合金的初级蠕变和稳态蠕变[J]. 材料研究学报, 2020, 34(2): 151-160.
[6] 鲁效庆,张全德,魏淑贤. A-π-D-π-A型吲哚类染料敏化剂的光电特性[J]. 材料研究学报, 2020, 34(1): 50-56.
[7] 李学雄,徐东生,杨锐. 钛合金双态组织高温拉伸行为的晶体塑性有限元研究[J]. 材料研究学报, 2019, 33(4): 241-253.
[8] 刘庆生, 曾少军, 张丹城. 基于细观结构的阴极炭块钠膨胀应力数值分析及实验验证[J]. 材料研究学报, 2017, 31(9): 703-713.
[9] 马志军, 莽昌烨, 王俊策, 翁兴媛, 司力玮, 关智浩. 三种金属离子掺杂对纳米镍锌铁氧体吸波性能的影响[J]. 材料研究学报, 2017, 31(12): 909-917.
[10] 黄莉. 石蜡/水相变乳液的稳定性能和储能容量[J]. 材料研究学报, 2017, 31(10): 789-795.
[11] 朱良,王晶,李晓慧,锁红波,张亦良. 基于堆焊成形钛合金高周疲劳实验数据的R-S-N模型[J]. 材料研究学报, 2015, 29(9): 714-720.
[12] 陈杨,钱程,宋志棠,闵国全. 用AFM力曲线技术测定聚合物微球的压缩杨氏模量*[J]. 材料研究学报, 2014, 28(7): 509-514.
[13] 于桂琴,刘建军,梁永民. 胍盐离子液体的合成及其对钢/钢摩擦副的摩擦性能研究*[J]. 材料研究学报, 2014, 28(6): 448-454.
[14] 王效岗,李乐毅,王海澜,周存龙,黄庆学. 双金属复合板材辊式矫直的数值模型*[J]. 材料研究学报, 2014, 28(4): 308-313.
[15] 姚武,吴梦雪,魏永起. 三元复合胶凝体系中硅灰和粉煤灰反应程度的确定*[J]. 材料研究学报, 2014, 28(3): 197-203.