|
|
|
| 原子氧对金属银和有机防护涂层的侵蚀 |
| 张蕾; 严川伟 ; 屈庆 ; 曹楚南 ; 孙刚 ;童靖宇 ;李金洪 |
| 1.辽宁大学 2. 中国科学院金属研究所金属腐蚀与防护国家重点实验室 3. 北京卫星环境工程研究所 |
|
引用本文:
张蕾; 严川伟; 屈庆 ; 曹楚南; 孙刚 ; 童靖宇; 李金洪 . 原子氧对金属银和有机防护涂层的侵蚀[J]. 材料研究学报, 2002, 16(3): 274-278.
1 ZHU Chuncheng,QU Wei,ZHANG Xinghong,HE Xi- aodong,Progress in research on TiC-TiB_2 composites, Journal of Materials Review,17(1),48(2003) (朱春城，曲伟，张孛红，赫晓东，TiC-TiB_2复合材料的研究进展，材料导报，17(1)，48(2003))
2 D.Zhong,J.J.Moore,B.M.Mishra,T.Ohno,E.A.Levashov, J.Disamc,Composition and oxidation resistance of Ti-B- C and Ti-B-C-N coatings deposited by magnetron sput- tering,Surface and Coatings Technology,163,50(2003)
3 K.W.Lee,Y.H.Chen,Y.W.Chung,L.M.Keer,Hardness, internal stress and thermal stability of TiB_2/TiC multi- layer coatings synthesized by magnetron sputtering with and without substrate rotation,Surface and Coatings Technology,177(2),591(2004)
4 F.Kustas,B.Mishra,J.Zhou,Fabrication and characteri- zation of TiB_2-TiC and tungsten co-sputtered wear coat- ings,Surface and Coatings Technology,153,25(2002)
5 LI Jianlin,LI Fei,HU Keao,TiB_2-TiC nanocomposite powder fabricated via high energy ball milling,Journal of the European Ceramic Society,21,2829(2001)
6 ZHAO Hong,CHENG Yibing,Formation of TiB_2-TiC composites by reactive sintering,Ceramics International, 25(1),353(1999)
7 S.K.Bhaumik,C.Divakar,A.K.Singh,G.S.Upadhyaya, Synthesis and sintering of TiB_2 and TiB_2-TiC composite under high pressure,Materials Science and Engineering A, 279,275(2000)
8 Zhang Xinghong,Zhu Chuncheng,Qu Wei,He Xiaodong, V.L.Kvanin,Self-propagating high temperature combus- tion synthesis of TiC/TiB_2 ceramic-matrix composites, Composites Science and Technology,62,2037(2002)
9 J.W.Lee,Z.A.Munir,M.Ohyanagi,Dense nanocrystalline TiB_2-TiC composites formed by field activation from high-energy ball milled reactants,Materials Science and Engineering A,325,221(2002)
10 LIU Wenjun,XIONG Weihao,ZHENG Yong,Appearance of fracture and toughening mechanisms of Ti(C,N)-based cermet,The Chinese Journal of Nonferrous Metal,16(5), 800(2006) (刘文俊，熊惟皓，郑勇，Ti(C，N)基金属陶瓷断口形貌及增韧机理，中国有色金属学报，16(5)，800(2006))
11 TANG Jianxin,ZENG Zhaoqiang,HU Xiaoqing,MIAO Hezhuo,TiB_2-TiC ceramics matrix composites prepared by in-situ technique,Materials Engineering,(2),19(2001) (唐建新，曾照强，胡晓清，苗赫濯，原位合成TiB_2-TiC陶瓷基复合材料，材料工程，(2)，19(2001))
12 S.J.Hong,V.Viswanathan,K.Rea,S.Patil,S.Deshpande, P.Georgieva,T.McKechnie,S.Seal,Plasma spray formed near-net-shape MoSi_2-Si_3N_4 bulk nanocomposites- structure property evaluation,Materials Science and En- gineering A,404,165(2005)
13 YIN Bangyao,WANG Lingsen,Evaluation of fracture toughness of zirconia-based ceramic by the indentation method,Powder Metallurgy Materials Science and Engi- neering,6(1),78(2001) (尹邦跃，王零森，ZrO_2基陶瓷压痕断裂韧性的测定，粉末冶金材料科学与工程，6(1)，78(2001))
14 ZHU Chuncheng,ZHANG Xinghong,XU Qiang,HE Xi- acdong,Self-propagating high-temperature synthesis of TiB2/TiC ceramics,Materials Engineering,(2),13(2002) (朱春城，张幸红，徐强，赫晓东，自蔓延高温合成法制备TiB_2/TiC复合陶瓷，材料工程，(2)，13(2002))q |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
