Please wait a minute...
材料研究学报  2003, Vol. 17 Issue (2): 140-144    
  论文 本期目录 | 过刊浏览 |
抗紫外纳米TiO2/ZnO复合丙烯酸酯涂料
刘福春; 韩恩厚;柯伟
中国科学院金属研究所金属腐蚀与防护国家重点实验室
引用本文:

刘福春; 韩恩厚; 柯伟 . 抗紫外纳米TiO2/ZnO复合丙烯酸酯涂料[J]. 材料研究学报, 2003, 17(2): 140-144.

全文: PDF(1149 KB)  
摘要: 提出了制备抗紫外纳米复合丙烯酸酯涂料的新方法——两步法,第一步是制备纳米浓缩浆;第二步将纳米浓缩浆和涂料基料等组分均匀混合,制成纳米复合涂料。研究了纳米二氧化钛浓缩浆和纳米氧化锌浓缩浆在纳米复合丙烯酸酯涂料中屏蔽紫外线的作用.加入少量纳米TiO2 和纳米ZnO浓缩浆可以显著提高纳米复合丙烯酸酯涂层的紫外线屏蔽作用,如在丙烯酸酯涂层中加入5.5 %纳米二氧化钛浓缩浆,干膜的厚度为20μm时,可屏蔽99 %的紫外线;在丙烯酸酯涂层中加入5.5 %纳米氧化锌浓缩浆,漆膜的厚度为75μm时,可屏蔽99 %的紫外线。
关键词 材料合成与加工工艺抗紫外纳米复合涂料    
Key words
收稿日期: 1900-01-01     
1 YAN Peiyu, XING Feng, Investigation into the Materials of Structure Engineering Following the Principle of Sustainable Development, in: The Strategic Development Seminar of Architecture, Environment and Civil Engineering, N.S.F.C., 2004, (12), 178-179 (阎培渝,邢峰,遵循可持续发展原则的结构工程材料研究,建筑、环境与土木工程学科发展战略研讨会,国家自然科学基金委员会,2004,(12)p.178-179
2 ZHAO Xiaolong, BA Hengjing, Preparation technology of high duribility concrete with ordinary strength, Architecture Technology, 35(1), 26(2004) (赵霄龙,巴恒静,普通强度高耐久性混凝土的配制技术,建筑技术,35(1),26(2004))
3 P.K.Mehta, P.J.M.Monteiro, Concrete Microstructure, Properties, and Materials, 3rd ed. (New York, McGraw Hill, 2006) p.41-46
4 B.Dannys, B.Gerard, G.Jacques, Contribution to the Formation mechanism of the transition zone between rockcement pastes, Concrete and Cement Research, 23(3), 335(1993)
5 J.C.MASO, The bond between aggregates and hydrated cement pastes, in: Proceedings of 7th International Congress on the Chemistry of Cement ,Vol. 3 (Paris, Editions Septima, 1980), p.Ⅶ-1/3-Ⅶ-1/15
6 R.Zimbelman, Contribution of cement-aggregate bond, Cement and Concrete Research, 15(5), 801(1985)
7 J.C.MASO, B.Bourdette, Interfacial transition zone in concrete, Advanced Cement Based Materials, 2(1), 30(1995)
8 MA Yiping, Study on increasing of interfacial bond strength between cement paste and aggregate, Journal of Building Materials, 2(1), 29(1999) (马一平,提高水泥石-集料界面粘结强度的研究,建筑材料学报,2(1),29(1999))
9 Xiong Guangjing, Luo Baiyun, Wu Xiang, Li Gengying, Chen Liqiang, Influence of silane coupling agent on quality of interfacial transition zone between concrete substrate and repair materials, Cement & Concrete Composites, 28, 97(2006)
10 E.P.Plueddemann, Silane Coupling Agent, 1st ed. (New York, Plenum Press, 1982) p.19, p.49-52, p.128-130
11 Yang Rui, Liu Yujuan, Wang Kunhua, Yujian, Characterization of surface interaction of inorganic fillers with silane coupling agents, Journal of Analytical and Applied Pyrolysis, 70, 413(2003)
12 M.E.Connell, W.M.Cross, T.G.Snyder, R.M.Winter, J.J.Kellar, Direct monitoring of silane/epoxy interphase chemistry, Composites Part A, 29A, 495(1998)
13 Akihiko Kondo, Takafumi Urabe, Kohiji Yoshinaga, Adsorption activity and conformation of-amylase on various ultrafine silica particles modified with polymer silane coupling agents, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 109, 129(1996)
14 LI Yili, XIONG Guangjing, LI Yiqiang, Influence of temperature and immersing period on splitting tensile strength of granite/silane coupling agent /cement paste interface, Building Technique Development, 33(1), 34(2006) (李屹立,熊光晶,李毅强,温度和浸泡时间对花岗岩/偶联剂/水泥浆界面层劈拉强度的影响,建筑技术开发,33(1),34(2006))
15 XU Yi, TANG Shouyuan, TENG Yi, ZHANG Xiaofeng, Hydrolysis and condensation of silane agent for metallic surface treatmen, Journal of Chongqing University, 25(10), 72(2002) (徐溢,唐守渊,滕毅,张晓凤,金属表面处理用硅烷试剂的水解与缩聚,重庆大学学报,25(10),72(2002))
16 HUANG Congyun, LONG Shizong, Action mechanism of coupling agent and polymer in sulphoaluminate-MDF cement, Chinese Journal of Materials Research, 8(2), 158(1994) (黄从运,龙世宗,偶联剂KH和聚合物PVA在硫铝酸盐- MDF水泥中的作用机理,材料研究学报,8(2),158(1994))
17 ZENG Zhiqiang, XIAO Xiaoyue, GUI Zhilun, LI Longtu, Surface grafting of coupling agents on the Al2O3-SiO2-TiO2 membranes, Chinese Journal of Materials Research, 13(2), 125(1999) (曾智强,萧小月,桂治轮,李龙土,Al2O3-SiO2-TiO2薄膜的表面改性-偶朕剂反应,材料研究学报,13(2),125(1999))
18 Y.W.Leong, M.B.Abu Bakar, Z.A.Mohd Ishak, A.Ariffin, Effects of filler treatments on the mechanical, flow, thermal, and morphological properties of talc and calcium carbonate filled polypropylene hybrid composites, Journal of Applied Polymer Science, 98, 413(2005)
19 LIU Tiejun, OU Jinping, LI Jiahe, Effects of silanetreated silica fume on damping property of cement mortar, Journal of the Chinese Ceramic Society, 31(11), 1125(2003) (刘铁军,欧进萍,李家和,硅粉的硅烷化对水泥砂浆阻尼性能的影响,硅酸盐学报,31(11),1125(2003))
[1] 周海涛, 侯湘武, 汪彦博, 肖旅, 袁勇, 孙京丽. Nb-TiAl合金的高温变形行为及其板材的性能[J]. 材料研究学报, 2022, 36(6): 471-480.
[2] 闫福照, 李静, 熊良银, 刘实. FeCr-ODS铁素体合金的氧化+粉锻工艺制备及其微观结构[J]. 材料研究学报, 2022, 36(6): 461-470.
[3] 王永鹏, 贾治豪, 刘梦竹. 二维CdO纳米棒的制备及其用于葡萄糖传感器的可行性[J]. 材料研究学报, 2021, 35(1): 53-58.
[4] 夏傲, 赵晨鹏, 曾啸雄, 韩曰鹏, 谈国强. B掺杂MnO2的制备及其电化学性能[J]. 材料研究学报, 2021, 35(1): 36-44.
[5] 蔡国栋, 程西云, 王典. FDM3D打印316L不锈钢试样和La对析出物形貌和分布的影响[J]. 材料研究学报, 2020, 34(8): 635-640.
[6] 谢礼兰, 杨冬升, 凌静. 高容量锂电池负极材料TiNb2O7的合成及其机理[J]. 材料研究学报, 2020, 34(5): 385-391.
[7] 马炜杰,杨西荣,罗雷,刘晓燕,郝凤凤. 复合形变超细晶纯钛的动态再结晶模型[J]. 材料研究学报, 2020, 34(3): 217-224.
[8] 姜巨福, 王迎, 肖冠菲, 邓腾, 刘英泽, 张颖. 变质细化和热处理对挤压铸造成形A356铝合金构件性能的影响[J]. 材料研究学报, 2020, 34(12): 881-891.
[9] 杨占鑫, 吴琼, 任奕桥, 屈凯凯, 张哲豪, 仲为礼, 范广宁, 齐国超. 宏量制备层状Ti3C2及其超级电容的性能[J]. 材料研究学报, 2020, 34(11): 861-867.
[10] 秦斌,王群,王富孟,靳利娥,解小玲,曹青. 高电导率低热膨胀系数针状焦的制备[J]. 材料研究学报, 2019, 33(1): 53-58.
[11] 王强, 郝瑞亭, 赵其琛, 刘思佳. 多周期分层溅射硫化物靶制备铜锌锡硫薄膜太阳电池[J]. 材料研究学报, 2018, 32(6): 409-414.
[12] 刘正华, 王兢, 杜海英, 王惠生, 李晓干, 王小风. 基于联合仿真方法研究静电纺丝轨迹[J]. 材料研究学报, 2018, 32(2): 127-135.
[13] 李延伟, 谢志平, 刘参政, 姚金环, 姜吉琼, 杨建文. 二维褶皱状V2O5纳米材料的制备和储锂性能[J]. 材料研究学报, 2017, 31(5): 374-380.
[14] 李成冬, 姚志垒, 李举, 徐进, 熊新. LaF3表面修饰Li[Li0.2Mn0.54Ni0.13Co0.13]O2的制备及其电化学性能[J]. 材料研究学报, 2017, 31(5): 394-400.
[15] 唐昭辉, 丁学勇, 董越, 刘程宏, 魏国. w(MgO)对高钛高炉渣黏流特性的影响*[J]. 材料研究学报, 2016, 30(6): 443-447.