|
|
|
| 脉冲电流处理后低碳钢中的局域纳米结构 |
| 周亦胄;张伟;郭敬东 |
| 中国科学院金属研究所 沈阳材料科学国家（联合）实验室 |
|
引用本文:
周亦胄; 张伟; 郭敬东 . 脉冲电流处理后低碳钢中的局域纳米结构[J]. 材料研究学报, 2002, 16(5): 467-472.
1 T.Tsuchiyama,R.Hirota,K.Fukunaga,S.Takaki,Ridging- free ferritic stainless steel produced through recrystalliza- tion of lath martensite,ISIJ Int.,45(6),923(2005)
2 H.C.Chao,J.D.Defilippi,Effect of chromium and molyb- denurn segregation on the ridging behavior of type 434 stainless steel,Metall.Trans.,2(11),3209 (1971)
3 K.Suzuki,S.Asami,K.Suzuki,Formation of ridging re- lated to the banded segregation pattern of chromium and carbon on ferritic stainless steel sheet,Trans.ISIJ,23(9), 731 (1983)
4 H.C.Chao,The mechanism of ridging in ferritic stainless steels,Trans.ASM,60(1),37(1967)
5 H.Takechi,H.Kato,T.Sunami,T.Nakayama,The mecha- nism of ridging phenomenon in 17% chromium stainless steel sheets,Trans.JIM,31(6),717 (1967)
6 R.N.Wright,Anisotropic plastic flow in ferritic stainless steels and the roping phenomenon,Metall.Trans.,3(1), 83(1972)
7 K.Bethke,M.HSlcher,K.Liicke,Local orientation investi- gation on the ridging phenomenon in iron 17% chromium steel,Mater.Sci.Forum,15"g-162(2),1137(1994)
8 H.M.Kim,J.A.Szpunar,Ridging phenomena in textured ferritic stainless steel sheets,Mater.Sci.Forum,157- 162,753(1994)
9 M.Brochu,T.Yokota,S.Satoh,Analysis of grain colonies in type 430 ferritic stainless steels by electron back scat- tering diffraction,ISIJ Int.,37(9),872(1997)
10 K.Sztwiertnia,J.Pospiech,Orientation topography and ridging phenomenon in ferritic stainless steel sheets,Arch Metall,44(2),157(1999)
11 H.Takeuchi,H.Mori,Y.Ikehara,T.Komano,T.Yanai,The effects of electromagnetic stirring on cast structure of continuously cast SUS430 stainless steel slabs,Tetsu-to- Hagané,66,638(1980)
12 Y.Itoh,S.Takao,T.Okajima,K.Tashiro,Effects of alloying elements and inoculators on refining of solidification struc- tures of type 430 stainless steel,Tetsu-to-Hagané,66(6), 710(1980)
13 Y.Itoh,T.Okajima,H.Maede,K.Tashiro,Refining of solid- ification structures of continuously cast type 430 stainless steel slabs by electromagnetic stirring,Tetsu-to-Hagané, 67(7),946(1981)
14 H.J.Shin,J.K.An,S.H.Park,D.N.Lee,The effect of tex- ture on ridging of ferritic stainless steel,Acta Materialia, 51,4693(2003)
15 J.Hamada,Y.Matsumoto,F.Fudanoki,S.Maeda,Effect of initial solidified structure on ridging phenomenon and tex- ture in type 430 ferritic stainless steel sheets,ISIJ Int., 43(12),1989(2003)
16 N.Tsuji,K.Tsuzaki,T Maki,Effects of rolling reduction and annealing temperature on the recrystailization struc- ture of solidified columnar crystals in a 19% Cr ferritic stainless steel,ISIJ Int.,34(12),1008(1994)
17 N.Tsuji,K.Tsuzaki,T.Maki,Effect of initial orientation on the cold rolling behavior of solidified columnar crys- tals in a 19% Cr ferritic stainless steel,ISIJ Int.,32(12), 1319(1992)
18 N.Tsuji,K.Tsuzaki,T.Maki,Effect of initial orientation on the recrystallization behavior of solidified columnar crystals in a 19% Cr ferritic stainless steel,ISIJ Int.,33(7), 783(1993)
19 M.-Y.Huh,O.Engler,Effect of intermediate annealing on texture,formability and ridging of 17%Cr ferritic stainless steel sheet,Mater.Sci.Eng.A,308,74(2001)
20 Y.Yazawa,Y.Ozaki,Y.Kato,O.Furukimi,Development of ferritic stainless steel sheets with excellent deep drawabil- ity by {111} recrystallization texture control,JSAE Rev., 24,483(2003)
21 D.Daniel,J.J.Jonas,Measurement and prediction of plas- tic anisotropy in deep-drawing steels,Metall.Trans.A, 21A,33(1990) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
