Please wait a minute...
Chin J Mater Res  2008, Vol. 22 Issue (6): 664-672    DOI:
论文 Current Issue | Archive | Adv Search |
Deposit carbon coatings on high Co YG cemented carbide with combustion flame
 TANG Dewen1; CHENG Xiaoling1; KUANG Tongchun2†; WANG Chengyong1
1.School of Electrical and Mechanical Engineering; Guang Dong University of Technology; GuangZhou 510090
2.Experiment Center; South China University of Technology; Guangzhou 510641
Cite this article: 

TANG Dewen; CHENG Xiaoling; KUANG Tongchun; WANG Chengyong. Deposit carbon coatings on high Co YG cemented carbide with combustion flame. Chin J Mater Res, 2008, 22(6): 664-672.

Download:  PDF(1762KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

C2H2 and O2 of flame was used to deposit carbon coatings on high Co YG series cemented carbide surface. the influence of acid corroded Co YG8, YG16 and deposition time have been investigated With the method of XRD, SEM, Raman and atomic microscope, carbon coatings structure, quality and Cross sectional microstructures of carbon coating was analyzed. The experimental result show that after different acid corroded Co time, the typical diamond/nanometer carbon tube and diamond-graphite-no crystal carbon coatings have been formed on the cemented carbide YG8 surface; after acid corroded Co 20 time, nanometer carbon tube has been mainly formed on the cemented carbide YG16 surface

Key words:  functional materials      diamond      carbon nanotubes      flame      Yg8cemented carbide      Yg16cemented carbide     
Received:  26 March 2008     
ZTFLH: 

TB34

 
  TB332  
  TB742

 

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2008/V22/I6/664

1 YAN Chunhui, KUANG Tongchun, BAI Xiaojun, CHENG Xiaoling, Surface modification of WC–20% (Fe/Co/Ni) cemented carbide, Cemented carbide, 18(3), 134 (2001)
(晏春晖, 匡同春, 白晓军, 成晓玲, WC-20%(Fe/Co/Ni)硬质合金的表面改性处理, 硬质合金, 18(3), 134(2001))
2 Sahoo B, Chattopadhyay A K, On effectiveness of various surface treatments on adhesion of HF CVD diamond coatings to tungsten inserts, Diamond and related Materials, 11, 1660(2002)
3 YANG Li, YU Zhi-ming, YIN Lei, Effect of cobaltetched treatment on the adhesion between diamond films and WC-Cocemented carbide, China Surface Engineering, 16(6), 16(2003)
4 YANG Li, YU Zhi-ming, YIN Lei, Effect of various surface treatment on diamond films on WC–6%Co , The Chinese Journal of Nonferrous Metals, 14(3), 429(2004)
5 HUANG Yangfeng, MA Zhibin, WANG Jianhua, Effect of copper and Cu/Ti intermediate layer on adhesion of diamond film, Materials Protection, 36(11), 16(2003)
(黄扬风, 马志斌, 汪建华, Cu和Cu/Ti过渡层对金刚石薄膜附着力的影响, 材料保护, 36(11), 16(2003))
6 ZHANG Yuying, LAI Qingmin, MIAO Jinqi, Vacuum boronizing pretreatment for adhesion enhancement of CVD diamond coatings on YG6 cutters, Diamond & Abrasive Engineering, 3, 548(2005)
(张玉英, 来清民, 苗晋琦, YG6金刚石涂层刀片衬底真空硼化处理新技术研究, 金刚石与磨料磨具工程, 3, 548(2005))
7 WANG Yong, MA Yuping, SUN Fanghong, Influence on the performance of CVD diamond films by boronizing on smooth cobalt-cemented tungsten carbide, Chinese Mechanical Engineering, 17(5), 545(2006)
(王勇, 马玉平, 孙方宏, 光滑硬质合金衬底渗硼预处理对CVD金刚石薄膜性能的影响, 中国机械工程,17(5), 545(2006))
8 WANG Chuanxin, WANG Jianhua, MAN Weidong, Effects of W diffusion barrier layer for diamond coatings deposited on WC2Co substrates, Chinese Journal of High Pressure Physics, 18(1), 83(2004)
(王传新, 汪建华, 满卫东, W过渡层结合界面对金刚石薄膜在WC-6%Co上的附着力的影响, 高压物理学报, 18(1), 83(2004))
9 Deuerler F, Woehrl N, Buck V, Characterisation of nanostructured diamond coatings on various hardmetal surfaces, International Journal of Refractory Metals & Hard Materials, 24, 392(2006)
10 WEI Qiuping, YU Zhiming, MA Li, YOU Xiaolong, Effect of ambient pressure on diamond films on boronized WC- 13% Co substrates, The Chinese Journal of Nonferrous Metals, 17(5), 775(2007)
(魏秋平, 余志明, 马莉, 游小龙, YG13硼化处理后沉积气压对金刚石薄膜的影响, 中国有色金属学报, 17(5), 775 (2007))
11 MA Guojia, DENG Xinlu, Diamond- like carbon film and its application s and preparation, Vacuum, 5, 27(2002)
(马国佳, 邓新绿, 类金刚石膜的应用及制备, 真空, 5, 27(2002))
12 Saenger, K.L. Grill, A. Schrott, A.G. et, al, Etch stop and electrical properties of Si-containing diamond-like carbon, Proceedings of Advanced Metallization and Interconnect Systems for ULSI Applications in 1996, 6, 499(1997)
13 Kapil, R.Mehta, B.R.Vankar V.D, Growth of 8H polytype of diamond using cyclic growth etch oxy-acetylen flame setup, Thin Solid Film, 312, (1998)
14 Sun, L.F.Mao, J.M.Pan, Z.W, Growth of straight nanotubes with a cobalt-nickel catalyst by chemical vapor deposition, Applied Physics Letters, 74(5), 644(1999)
15 Hiura, H.Ebbesen, T.W.Tanigaki, K, Raman studies of carbon nanotubes, Chemical Physics Letters, 202(6), 509(1993)
16 Ponsonnet, L.Donnet, Grill.A, EELS analysis of hydrogenated diamond-like carbon films, Thin Solid Films, 319(1-2), 97(1998)
17 Kulisch, W.Reinke, S.Modeling of c-BN thin film deposition, Diamond Films and echnology, 7(2), 105(1997)

[1] SHAO Siwu, ZHENG Yuting, AN Kang, HUANG Yabo, CHEN Liangxian, LIU Jinlong, WEI Junjun, LI Chengming. Progress on Application of Bias Technology for Preparation of Diamond Films[J]. 材料研究学报, 2022, 36(3): 161-174.
[2] CUI Li, SUN Lili, GUO Peng, MA Xin, WANG Shuyuan, WANG Aiying. Effect of Deposition Time on Structure and Performance of Diamond-like Carbon Films on PEEK[J]. 材料研究学报, 2022, 36(11): 801-810.
[3] PAN Ying, ZHAO Hongting. Preparation of Halloysite Based Layer-by-Layer Coating on Flexible Polyurethane Foam and Its Performance of Flame Retardant and Smoke Suppression[J]. 材料研究学报, 2021, 35(6): 449-457.
[4] JI Yaming, YANG Yaru, YAO Yongbo, LI Jiaqian, SHEN Xiaojun, LIU Shuqiang. Synthesis of Carbon Nanosphere-Based Nitrogen-Phosphorus-Sulfur Compound Flame Retardant and Flame Retardancy of CNSs-H-D Reinforced Epoxy Resin[J]. 材料研究学报, 2021, 35(12): 918-924.
[5] XU Chunping, CHEN chunyue, ZHANG yonghang, Gong wei, BAN daming. Flame Retard Modification of Vinyl Ester Resin with Phosphorous Polymer Type Flame Retardant[J]. 材料研究学报, 2021, 35(11): 843-849.
[6] YANG Yawei, CHANG Shulong, SHANG Yuanyuan. Performance of Hydrophobic Stretchable Carbon Nanotubes/Polydimethylsiloxane Composite Films[J]. 材料研究学报, 2021, 35(10): 795-800.
[7] Wei CHEN,Yanyan NIE,Xiaogang SUN,Xu LI,Jie WANG,Hao HU,Guodong LIANG,Yapan HUANG,Chengcheng WEI. Performance of Lithium-ion Capacitors Using Pre-lithiated Multi-walled Carbon Nanotube Composite Anode[J]. 材料研究学报, 2019, 33(5): 371-378.
[8] Shuwen ZHANG,Jie ZHANG,Guichun WANG,Danying GAO. Effect of Carbon Nanotubes on Thermal Expansion Properties of Cement-based Materials[J]. 材料研究学报, 2019, 33(5): 387-393.
[9] Yibao WANG,Nan HUANG,Lusheng LIU,Ziyao YUAN,Peng LI,Wenxue ZHANG,Xin JIANG. Preparation and Cutting Performance of Diamond Coated Hard Alloy Cutting Tools for 7075 Aviation Al-alloy[J]. 材料研究学报, 2019, 33(1): 15-26.
[10] Zhengzhou WANG, Ting YANG, Lifei HU. Preparation and Application for EPS Foam of Melamine-Bis[Tetrakis (Hydroxymethyl) Phosphonium] Sulfate Flame Retardant[J]. 材料研究学报, 2018, 32(8): 584-590.
[11] Yanxiang WANG, Shunsheng SU, Wenxin FAN, Jianjie QIN, Ce QU, Chengguo WANG. Metal Catalyst for Preparation of Multiscale Reinforcement of Carbon Nanotubes on Carbon Fibers[J]. 材料研究学报, 2018, 32(7): 495-501.
[12] Jin ZHANG, Ning WANG, Chong ZHAO, Jiaxing LI, Tianchi ZHANG. Synthesis and Performances of Silver Vanadate For Battery of Implantable Medical Devices[J]. 材料研究学报, 2018, 32(7): 555-560.
[13] Yachao WANG, Jiangping ZHAO, Yuanyuan TONG, Jianxiong DING. Preparation and Flame-retartant Property of LaCl3 Doped Polyacrylamide/Silica Ash-based Flame Retardant Materials[J]. 材料研究学报, 2017, 31(5): 387-393.
[14] Jing JIN,Hao WANG,Zhongjun SHU,Lingang LU. Effect of Two Maleic Anhydride Grafted Polymers as Modifier on Intumescent Flame Retardancy and Mechanical Property of Polypropylene Based Composites[J]. 材料研究学报, 2017, 31(3): 219-225.
[15] Lili SUN,Peng GUO,Xiaowei LI,Peiling KE,Aiying WANG. Preparation and Hydrophobic Properties of Diamond-like Carbon Films on PET Substrates[J]. 材料研究学报, 2017, 31(3): 187-194.
No Suggested Reading articles found!