|
|
|
| Double PTC Effect of Carbon Nanotubes Filled Immiscible Polymer Blends |
Chang LU( ),Dian YANG,Rui WANG,Jichun LIU,Yuqing ZHANG |
| Key Lab of Polymer Science and Nanotechnology, Chemical Engineering &Pharmaceutics School, Henan University of Science and Technology, Luoyang 471003 |
|
Cite this article:
Chang LU,Dian YANG,Rui WANG,Jichun LIU,Yuqing ZHANG. Double PTC Effect of Carbon Nanotubes Filled Immiscible Polymer Blends. Chinese Journal of Materials Research, 2014, 28(5): 380-386.
|
|
|
Abstract Carbon nanotubes (CNTs) and poly(styrene-co-maleic anhydride) modified CNTs (SMA- CNTs) were blended with an immiscible system polystyrene/nylon6 (PS/PA6) to prepare conductive polymer composites PS/PA6/CNTs and PS/PA6/SMA-CNTs respectively. The PTC (positive temperature coefficient) effect of the composites was investigated. For PS/PA6/CNTs composites, CNTs were selectively distributed in PA6 phase; the percolation threshold was 5% (mass fraction) and a weak PTC effect was observed. For PS/PA6/SMA-CNTs composites, TEM results showed that CNTs were distributed both at the PS/PA6 interface and in PA6 phase due to the induced effect of SMA on CNTs. As a consequence, the percolation threshold decreased to 0.112%. Meanwhile, an especial double PTC effect was observed. The PTC effect was affected by the morphology of PS/PA6 blends. The emerge of PTC effect of the composites with dispersed PA6 phase was attributed to the glass transition of PS phase and the melt of PA6 phase. However, for blends with PS as disperse phase and PS/PA6 as bicontinuous phases, the emerge of PTC effect was due to the melt of PA6 phase.
|
|
Received: 16 September 2013
|
| Fund: *Supported by National Natural Science Foundation of China No. 51003024 and the Foundation for University Young Key Teacher by Henan Province of China. |
| 1 | R. Strumpler, J. Glatz-Reichenbach,Conducting polymer composites, J. Electroceram, 3(4), 329(1999) | | 2 | J. C. Huang,Carbon black filled conducting polymers and polymer blends, Adv. Polym. Technol., 21(4), 299(2002) | | 3 | M. Sumita, K. Sakata, Y. Hayakawa, S. Asai, K. Miyasaka, M. Tanemura,Double percolation effect on the electrical conductivity of conductive particles filled polymer blends, Colloid. Polym. Sci., 270(2), 134(1992) | | 4 | M. Q. Zhang, Y. H. Gang, M. Zeng, H. B. Zhang, Y. H Hou,Two-step percolation in polymer blends filled with carbon black, Macromolecules, 31(19), 6724(1998) | | 5 | J. Y. Feng, C. M. Chan,Positive and negative temperature coefficient effects of an alternating copolymer of tetrafluoroethylene-ethylene containing carbon black-filled HDPE particles, Polymer, 41(12), 7279(2000) | | 6 | Y. Bin, C. Xu, D. Zhu, M. Matsuo,Electrical properties of polyethylene and carbon black particleblends prepared by gelation / crystallization from solution, Carbon, 40(2), 195(2002) | | 7 | H. Yui, G. Z Wu., H. Sano, M. Sumita, K. Kino,Morphology and electrical conductivity of injection-molded polypropylene/carbon black composites with addition of high-density polyethylene, Polymer, 47(10), 3599(2006) | | 8 | Z. B. Xu, C. Zhao, A. J. Gu, Z. P. Fang,Effect of morphology on the electric conductivity of binary polymer blends filled with carbon black, J. Appl. Polym. Sci., 106(3), 2008(2007) | | 9 | YANG Bo,CHEN Xiaolang, CHEN Guangshun, GUO Shaoyun, Morphology and conductivity of conductive carbon black filled PP-EAA composites, Acta Materiae Compositae Sinica, 24(3), 78(2007) | | 9 | (杨 波, 陈晓浪, 陈光顺, 郭少云, 导电炭黑填充PP-EAA 复合材料的形态及电性能, 复合材料学报, 24(3), 78(2007)) | | 10 | Z. M. Li, X. B. Xu, A. Lu, K. Z. Shen, R. Huang, M. B. Yang,Carbon black/poly(ethylene terephthalate)/polyethylene composite with electrically conductive in situ microfiber network, Carbon, 42(2), 428(2004) | | 11 | F. Gubbels, R. Jerome, P.H. Teyssie, E. Vanlathem, R. Deltour, A. Calderone,Selective localization of carbon black in immiscible polymer blends: a useful tool to design electrical conductive composites, Macromolecules, 27(7), 1972(1994) | | 12 | S. X. Xu, M. Wen, J. Li, S.Y. Guo, M. Wang, Q. Du,Structure and properties of electrically conducting composites consisting of alternating layers of pure polypropylene and polypropylene with a carbon black filler, Polymer, 49(22), 4861(2008) | | 13 | M. Sumita, K. Sakata, S. Asai, K. Miyasaka, H. Nakagawa,Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black, Polym. Bull., 25(2), 265(1991) | | 14 | J. Y. Feng, C. M. Chan,Carbon black-filled immiscible blends of poly(vinylidene fluoride) and high density polyethylene: Electrical properties and morphology, Polym. Engin. Sci., 38, 1649(1998) | | 15 | J. Y. Feng, C. M. Chan,Double positive temperature coefficient effects of carbon black-filled polymer blends containing two semicrystalline polymers, Polymer, 41(12), 4559(2000) | | 16 | W. H. Di, G. Zhang, Y. Peng, Z. D. Zhao,Two-step PTC effect in immiscible polymer blends filled with carbon black, J. Mater. Sci., 39, 695(2004) | | 17 | I. Mironi-harpaz, M. Narkis,Thermo-electric behavior (PTC) of carbon black-containing PVDF/UHMWPE and PVDF/XL-UHMWPE blends, Polym. Engin. Sci., 41, 205(2001) | | 18 | M. Moniruzzaman, K. I. Winey,Polymer nanocomposites containing carbon nanotubes, Macromolecules, 39(16), 5194(2006) | | 19 | J. R. Yu, K. B. Lu, E. Sourty, N. Grossiord, C. E. Konine, J. C. Loos,Characterization of conductive multiwall carbon nanotube/polystyrene composites prepared by latex technology, Carbon, 45, 2897(2007) | | 20 | M. Wu, L. Shaw,Electrical and mechanical behaviors of carbon nanotube-filled polymer blends, J. Appl. Polym. Sci., 99(2), 477(2006) | | 21 | S. Bose, A. R. Bhattacharyya, P. V. Kodgire, A. R. Kulkarni, A. S. Misra,Interactions induced dispersion and confinement of multi-walled carbon nanotubes in co-continuous polymer blends, J. Nanosci. Nanotechno., 8(4), 1867(2008) | | 22 | D. Wu, Y. Zhang, M. Zhang, W. Yu,Selective localization of multi-walled carbon nanotube in PLA/PCL blend, Biomacromolecules, 10(2), 417(2009) | | 23 | A. C. Baudouin, J. Devaux, C. Bailly,Localization of carbon nanotubes at the interface in blends of polyamide and ethylene-acrylate copolymer, Polymer, 51, 1341(2010) | | 24 | F. F. Tao, B. Nysten, A. C. Baudouin, J. M. Thomassin, D. Vuluga, C. Detrembleur, C. Bailly,Influence of nanoparticleepolymer interactions on the apparent migration behaviour of carbon nanotubes in an immiscible polymer blend, Polymer, 52, 4798(2011) | | 25 | C. Lu, X. N. Hu, Y. X. He, X. H. Huang, J. C. Liu, Y. Q. Zhang,Triple percolation behavior and positive temperature coefficient effect of conductive polymer composites with especial interface morphology, Polym. Bull., 68, 2071(2012) | | 26 | LU Chang,HU Xiaoning, HE Yuxin, LIU Jichun, ZHANG Yuqing, Electrical properties of conductive polymer composites with special morphology, Chinese Journal of Materials Research, 26(1), 37(2012) | | 26 | (陆 昶, 胡小宁, 赫玉欣, 刘继纯, 张玉清, 特殊形态结构导电高分子复合材料电学性能的研究, 材料研究学报, 26(1), 37(2012)) | | 27 | F. Gubbels, R. Jerome, E. Vanlathem, R. Deltour, S. Blacher, F. Brouers,Kinetic and thermodynamic control of the selective localization of carbon black at the interface of immiscible polymer blends, Chem. Mater, 10(5), 1227(1998) | | 28 | J. Feng, C. M. Chan, J. X. Li,A method to control the dispersion of carbon black in an immiscible polymer blend, Polym. Eng. Sci., 43(5), 1058(2003) |
|
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
