1 F.Q.Yan, F.Chen, Q.Shen, L.M.Zhang, Spark plasma sintering of α–Si3N4 ceramics with MgO–Al2O3 as sintering additives, Key Engineering Materials, 351, 176(2007)
2 F.Chen, Q.Shen, F.Q.YAN, L.M.Zhang, Pressureless sintering of α–Si3N4 porous ceramics using a H3PO4 poreforming agent, Journal of the American Ceramic Society, 90(8), 2379(2007)
3 G.Woetting, B.Caspers, E.Gugel, R.Westerheide, Hightemperature properties of SiC-Si3N4 particle composites, Journal of Engineering for Gas Turbines and Power, 122(1), 8(2000)
4 W.B.He, B.L.Zhang, H.R.Zhuang, W.L.Li, Preparation and sintering of Ni-coated Si3N4 composite powders, Ceramics International, 31(6), 811(2005)
5 H.Hyuga, M.I.Jones, K.Hirao, Yamauchi.Y, Microstructural characteristics in silicon nitride/tungsten composites by different in-situ processing, Materials Letters, 58(1-2), 21(2004)
6 J.H.Chen, X.D.Wang, J.L.Sun, Research on the Fe-silicon nitride material self-producing N2 at high temperature, Journal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, 13(1), 78(2006)
7 XIANG Tiegen, Molybdenum Metallurgy (Changsha, Central South University Press, 2002)
(向铁根,  钼冶金  (长沙, 中南工业大学出版社, 2002))
8 HAN Jiesheng, WANG Jingbo, ZHANG Shuwei, MENG Junhu, LV Jinjun, Study on the tribological properties of Fe–Mo–CaF2 high temperature self-lubricating material, Tribology, 23(4), 306(2003)
(韩杰胜, 王静波, 张树伟, 孟军虎, 吕晋军, Fe--Mo--CaF2高温自润滑材料的摩擦学特性研究, 摩擦学学报,  23(4), 306(2003))
9 MIAO Mingqing, FU Zhengyi, ZHANG Jinyong, GONG Lunjun, Microstructure and mechanical properties of TiB2/FeMo cermet, Journal of Inorganic Materials, 20(2), 499(2005)
(苗明清, 傅正义, 张金咏, 龚伦军, TiB2/FeMo陶瓷的显微结构与力学性能, 无机材料学报,  20(2), 499(2005))
10 YU Zongsen, Application of Rare Earth in Steel (Beijing, Metallurgical Industry Press, 1987)
(余宗森,  稀土在钢铁中的应用  (北京, 冶金工业出版社, 1987))
11 X.W.Zhu, Y.Zhou, K.Hirao, Effects of processing method and additive composition on microstructure and thermal conductivity of Si3N4 ceramics, Journal of the European Ceramic Society, 26, 711(2006)
12 G.Ling, H.Yang, Pressureless sintering of silicon nitride with magnesia and yttria, Materials Chemistry and Physics, 90, 31(2005)
13 TAN Xiaoping, LIANG Shuquan, LI Shaoqiang, TANG Yan, Preparation of Si–Al–Zr–O composite ceramics with ultra fine grains by in situ controlled crystallizing from the amorphous bulk, Journal of Inorganic Materials, 21(4), 906(2006)
(谭小平, 梁叔全, 李少强, 唐艳, 非晶化法制备Si--Al--Zr--O系超微细晶复相陶瓷, 无机材料学报,  21(4), 906(2006))
14 ZHANG Yougang, Generality of Electronic Materials (the second fascicule) (National Defense Industry Press, Beijing, 1993) p.102
(张有纲,  电子材料现代分析概论 (第二分册) (国防工业出版社, 北京, 1993) p.102)

15 CHEN Weiping, YANG Shaofeng, HAN Mengyan, Research development of ceramic/Fe-based alloy composites, The Chinese Journal of Nonferrous Metals, 20(2), 257(2010)
(陈维平, 杨少锋, 韩孟岩, 陶瓷/铁基合金复合材料的研究进展, 中国有色金属学报,  20(2), 257(2010))
16 F.J.Oliveira, R.F.Silva, J.M.Vieira, Thermochemistry of contacts between silicon nitride ceramics and steels, Acta< Materialia, 48(18-19), 4659(2000)
17 M.Kalin, J.Viintina, J.Vleugelsb, D.B.O.Van, Chemical reactivity of silicon nitride with steel and oxidised steel between 500 and 1200?C, Materials Science and Engineering A, 281(1-2), 28(2000)
18 J.J.Petrovic, M.L.Pena, I.E.Reinmanis, M.S.Sandlin, S.D.Conzone, H.H.Kung, D.P.Butt, Mechanical behavior of MoSi2 reinforced-Si3N4 matrix composites, J. Am. Ceram. Soc., 80(12), 3070(1997)
19 B.R.Zhang, F.Marino, V.M.Sglavo, S.Gialanella, In situ formation and high-temperature reinforcing effect of MoSi2 and WSi2 on reaction-bonded Si3N4, Mater. Sci. Eng. A, 239-240, 503(1997)