Chin J Mater Res  1995, Vol. 9 Issue (2): 190-192    DOI:

Current Issue | Archive | Adv Search |

PRELIMINARY STUDY ON TiC PARTICULATE REINFORCED NiAl MATRIX IN-SITU COMPOSITES

XING Zhanping;GUO Jianting; DAI Jiyian; AN Geying; HU Zhuangqi(Institute ofMetal Research; Chinese Academy ofSciences Harbin Institute ofTechnology)

XING Zhanping;GUO Jianting; DAI Jiyian; AN Geying; HU Zhuangqi(Institute ofMetal Research; Chinese Academy ofSciences Harbin Institute ofTechnology). PRELIMINARY STUDY ON TiC PARTICULATE REINFORCED NiAl MATRIX IN-SITU COMPOSITES. Chin J Mater Res, 1995, 9(2): 190-192.

Abstract References Related Articles Recommended Metrics Download:  PDF(1147KB)  Export:  BibTeX | EndNote (RIS)       Abstract  20 v.% TiC particulate reinforCed NiAl matrix composites have been fabricated by HPES technique. The Vickers hardness and compressive yield strength of the composite were obviously superior to the unreinforced NiAl. In particular, the yield strength of th Key words:  intermetallic matrix composites      NiAl-TiC      microstructure      compression properties      Received:  25 April 1995      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1995/V9/I2/190 1DestefaniJD．AdvMaterProcess,1989;2:372IshidaK,KainumaR．MctallTrans,1991:22A:4413王淑荷,赖万慧,孙超,李辉,谭明晕,郭建亭．铸造高温合金论文集．北京:中国科学技术出版社,1993,474WhittenbergerJD,JMaterSci,1990;25:355WangL,ArsenaultRJ,JMaterSciEng,1990:A127:91．6XingZhanping,GuoJianting,HuZhuangqi,AnGeying．ActaMetallurgicaSinica,1994:7(1):45． [1] PAN Xinyuan, JIANG Jin, REN Yunfei, LIU Li, LI Jinghui, ZHANG Mingya. Microstructure and Property of Ti / Steel Composite Pipe Prepared by Hot Extrusion[J]. 材料研究学报, 2023, 37(9): 713-720. [2] MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648. [3] ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667. [4] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696. [5] OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705. [6] XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613. [7] SHI Chang, DU Yuhang, LAI Liming, XIAO Siming, GUO Ning, GUO Shengfeng. Mechanical Properties and Oxidation Resistance of a Refractory Medium-entropy Alloy CrTaTi[J]. 材料研究学报, 2023, 37(6): 443-452. [8] LEI Zhiguo, WEN Shengping, HUANG Hui, ZHANG Erqing, XIONG Xiangyuan, NIE Zuoren. Influence of Rolling Deformation on Microstructure and Mechanical Properties of Al-2Mg-0.8Cu(-Si) Alloy[J]. 材料研究学报, 2023, 37(6): 463-471. [9] XIA Bo, WANG Bin, ZHANG Peng, LI Xiaowu, ZHANG Zhefeng. Effect of Tempering Temperature on Microstructure and Impact Properties of Two High-strength Leaf Spring Steels[J]. 材料研究学报, 2023, 37(5): 341-352. [10] ZHANG Shuaijie, WU Qian, CHEN Zhitang, ZHENG Binsong, ZHANG Lei, XU Pian. Effect of Mn on Microstructure and Properties of Mg-Y-Cu Alloy[J]. 材料研究学报, 2023, 37(5): 362-370. [11] ZHANG Ruixue, MA Yingjie, JIA Yandi, HUANG Sensen, LEI Jiafeng, QIU Jianke, WANG Ping, YANG Rui. Microstructure Evolution and Element Partitioning Behavior during Heat-treatment in Metastable β Titanium Alloy[J]. 材料研究学报, 2023, 37(3): 161-167. [12] LIN Shifeng, XU Dongan, ZHUANG Yanxin, ZHANG Haifeng, ZHU Zhengwang. Preparation and Mechanical Properties of TiZr-based Bulk Metallic Glass/TC21 Titanium Alloy Dual-layered Composites[J]. 材料研究学报, 2023, 37(3): 193-202. [13] DONG Yu'ang, YANG Huajie, BEN Dandan, MA Yunrui, ZHOU Xianghai, WANG Bin, ZHANG Peng, ZHANG Zhefeng. Excellent Cryogenic Tensile Properties of Ultra-fine Grained 316L Stainless Steel after Electropulsing Treatment in Liquid Nitrogen[J]. 材料研究学报, 2023, 37(3): 168-174. [14] ZHAO Yunmei, ZHAO Hongze, WU Jie, TIAN Xiaosheng, XU Lei. Effect of Heat Treatment on Microstructure and Properties of TIG Welded Joints of Powder Metallurgy Inconel 718 Alloy[J]. 材料研究学报, 2023, 37(3): 184-192. [15] LIU Dongyang, TONG Guangzhe, GAO Wenli, WANG Weikai. Anisotropy of 2060 Al-Li Alloy Thick Plate[J]. 材料研究学报, 2023, 37(3): 235-240. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed