Please wait a minute...
Chinese Journal of Materials Research  2012, Vol. 26 Issue (5): 538-544    DOI:
Current Issue | Archive | Adv Search |
Mechanical and Tribological Properties of Laminated Al2O3/TiC–Al2O3/TiC/CaF2 Self-lubrication Ceramic Material
SONG Peilong, YANG Xuefeng, WANG Shouren, YANG Liying
School of Mechanical Engineering, University of Jinan, Jinan 250022
Cite this article: 

SONG Peilong YANG Xuefeng WANG Shouren YANG Liying. Mechanical and Tribological Properties of Laminated Al2O3/TiC–Al2O3/TiC/CaF2 Self-lubrication Ceramic Material. Chinese Journal of Materials Research, 2012, 26(5): 538-544.

Download:  PDF(1124KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Al2O3/TiC–Al2O3/TiC/CaF2 laminated composite ceramic material was prepared by vacuum hot pressing sintering. The Vickers hardness is 20.7 GPa and the fracture toughness is 4.5 MPa·m1/2. The bending strength has little difference in the vertical direction and parallel direction which is respectively for 323 MPa and 353 MPa. Sliding wear tests against chilled 45# steel were performed on the ceramic composites using ring-disc method in dry conditions, worn morphology was observed by the scanning electron microscope (SEM) and the composition was investigated by energydispersive X-Ray spectroscopy (EDS). Results show that the friction coefficient and wear rate decline with the increase of the load and rotating speed. The material has self-lubricated property. The main wear mechanisms of laminated composite are abrasive wear and adhesive wear.

Key words:  composites      laminated ceramic materials      self-lubrication      wear and friction     
Received:  13 August 2012     
ZTFLH:  TH145  
  TH117  
Fund: 

Supported by National Natural Science Foundation for Young Scholars of China No.51005100, China Postdoctoral Science Foundation No.20110491572 and Scientific and Technological Development Program of Shandong Province No.2012GGX10324.

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2012/V26/I5/538


1 WEI Jianjun, XUE Qunji, The situation of the tribological research for ceramics, Tribology, 13(3), 268(1993)

(魏建军, 薛群基, 陶瓷摩擦学研究的发展现状, 摩擦学学报,  13(3), 268(1993))

2 ZAN Qingfeng, CAI Shengyou, HUANG Yong, The influence of the toughness on the component of soft-layer in the Si3N4/BN multilayered materials, Shandong Ceramic, 22(2), 4(1999)

(昝青峰, 蔡胜有, 黄  勇, Si3N4/BN层状陶瓷软层成分对材料韧性的影响, 山东陶瓷,  22(2), 4(1999))

3 N.Liu, M.Shi, Y.D.Xu, X.Q.You, P.P.Ren, J.P.Feng, Effect of starting powders size on the Al2O3-TiC composites, International Journal of Refractory Metals & Hard Materials, 22, 265(2004)

4 Q.Tai, A.Mocellin, Review: High temperature deformation of Al2O3 based ceramic particle or whisker composites, Ceramics International, 25, 395(1999)

5 Yongsheng ZHANG, Litian HU, Jianmin CHEN, Weimin LIU, Lubrication behavior of Y-TZP/Al2O3/Mo nanocomposites at high temperature, Wear, 268, 1091(2010)

6 CHENG Yin, XIAO Hanning, LI Yuping, Reinforcement mechanisms and preparation of laminated ceramic composites, Journal of Ceramic, 24(2), 111(2003)

(成 茵, 肖汉宁, 李玉平, 层状复合陶瓷增韧机理和制备工艺的研究, 陶瓷学报,  24(2), 111(2003))

7 LI Dongyun, QIAO Guanjun, JIN Zhihao, Progress in research on laminated ceramic composites, Journal of Inorganic Materials, 17(1), 10(2002)

(李冬云, 乔冠军, 金志浩, 层状复合陶瓷材料的研究进展, 无机材料学报,  17(1), 10(2002))

8 ZENG Yuping, JIANG Dongliang, TAN Shouhong, GUO Jingkun, Fabrication and properties of multilayer al2o3-tic composite ceramic, Journal of Inorganic Materials, 12(6), 802(1997)

(曾宇平, 江东亮, 谭寿洪, 郭景坤, 层状Al2O3-TiC复相陶瓷的制备与性能, 无极材料学报,  12(6), 802(1997))

9 CHEN Bei, DING Peidao, CHENG Chuan, Relationship between processing and mechanical property of A12O3/ZrO2 laminated ceramics, Bulletin of the Chinese Ceramic Society, 6, 27(2004)

(陈 蓓, 丁培道, 程 川, 层状复合陶瓷材料制备工艺与性能关系, 硅酸盐通报,  6, 27(2004))

10 LI Xiuhua, YUAN Qiming, YANG Zhengfang, The conch structure and biomimetic research on ceramics, Bulletin of the Chinese Ceramic Society, 2, 53(2003)

(李秀华, 袁启明, 杨正方, 贝壳结构及陶瓷的仿生研究, 硅酸盐通报,  2, 53(2003))

11 QIAN Xiaoqian, GE Manzhen, WU Yibing, YANG Hui, Reinforcement mechanisms and optimum design of laminated ceramic composites, Journal of Inorganic Materials, 14(4), 520(1999)

(钱晓倩, 葛曼珍, 吴义兵, 杨 辉, 层状复合陶瓷强韧化机制及其优化设计因素, 无机材料学报,  14(4), 520(1999))

12 W.J.Clegg, K.Kendall, N.M.Alford, A simple way to make tough ceramics, Nature, 347(10), 445(1990)

13 Henryk, Tomaszewski, Residual stress in layered ceramic composites, Journal of the European Ceramic Society, 19, 1329(1999)

14 YU Haijiang, WAN Julin, LIANG Kaiming, WANG Daning, LIU Fengru, 14% mol Ce-TZP and A12O3/Ce-TZP layered microcomposites, Journal of Inorganic Materials, 13(6), 893(1998)

(俞海江, 万菊林, 梁开明, 王大宁, 刘凤茹, 14mol%Ce--TZP和Al2O3/Ce--TZP层状复合材料的研究, 无机材料学报,  13(6), 893(1998))

15 Robert J. Moon, Mark Hoffman, Jon Hilden, Weight function analysis on the R-curve behavior of multilayered alumina-zirconia composite, Journal of the American Chemical Society, 85(6),1505(2002)

16 DING Xingeng, GE Manzhen, YANG Hui, Preparation and properties of laminated Al2O3/ZTA, Bulletin of the Chinese Ceramic Society, 19, 50(2000)

(丁新更, 葛曼珍, 杨 辉, 氧化铝/ZTA强夹层层状复合陶瓷的制备和性能, 硅酸盐通报,  19, 50(2000))

17 Hailong Wan, Bingbing Fan, Lun Feng, Deliang Chen, Hongxia Lu, Hongliang Xu, Chang-An Wang, Rui Zhang, The fabrication and mechanical properties of SiC/ZrB2 laminated ceramic composite prepared by spark plasma sintering, Ceramics International, 6(38),5015(2012)

18 Dongyun Li, Guanjun Qiao, Zhihao Jin, R-curve behavior of laminated SiC/BN ceramics, Ceramics International, 2(30), 213(2004)

19 CAI Shengyou, LI Jinlin, XIE Zhipeng, HUANG Yong, Influence of interfacial bonding of Si3N4 laminated composites on the mechanical properties, Acta Materiae Compositae

Sinica, 16(2), 110(1999)

(蔡胜有, 李金林, 谢志鹏, 黄 勇, 氮化硅层状陶瓷界面性能对力学性能的影响, 复合材料学报,  16(2), 110(1999))

20 V.Yaroshenko, Nina Orlovskaya, M.A.Einarsrud, Karl Berroth, V.Kovylayev, Laminar Si3N4-TiN hot-pressed ceramic composites, Key Engineering Materials, 132-136, 2017(1997)

21 XUE Qunji, LU Jinjun, Research status and developing trend of solid lubrication at high temperatures, Tribology, 19(1), 91(1999)

(薛群基, 吕晋军, 高温固体润滑研究的现状及发展趋势, 摩擦学学报,  19(1), 91(1999))

22 YANG Xuefeng, ZE Xiangbo, Wang Hongyan, Wear properties and microstructures of alumina matrix composite ceramics used for drawing dies, Ceramics International, 34(12), 3495(2009)

23 Tingzhi Si, Ning Liu, Qing’an Zhang, Xianqing You, Thermal shock fatigue behavior of TiC/Al2O3 composite ceramics, Rare Metals, 3(27), 308(2008)

24 CAO Tongkun, GAO Wei, Wear behavior and mechanism of self tribofilm formation of Al2O3/TiC/CaF2, Journal of Materials Engineering, 9,75(2009)

(曹同坤, 高 伟, Al2O3/TiC/CaF2陶瓷的摩擦磨损及自润滑膜的形成机理研究, 材料工程, 9,75(2009))

25 CAO Tongkun, DENG Jianxin, Friction and wear behavior of self-lubricating ceramic composite, Tribology, 25(6), 564(2005)

(曹同坤, 邓建新, 一种自润滑陶瓷摩擦磨损性能的研究, 摩擦学学报,  25(6), 564(2005))


[1] JI Yuchen, LIU Shuhe, ZHANG Tianyu, ZHA Cheng. Research Progress of MXene Used in Lithium Sulfur Battery[J]. 材料研究学报, 2023, 37(7): 481-494.
[2] ZHANG Tengxin, WANG Han, HAO Yabin, ZHANG Jiangang, SUN Xinyang, ZENG You. Damping Enhancement of Graphene/Polymer Composites Based on Interfacial Interactions of Hydrogen Bonds[J]. 材料研究学报, 2023, 37(6): 401-407.
[3] SHAO Mengmeng, CHEN Zhaoke, XIONG Xiang, ZENG Yi, WANG Duo, WANG Xuhui. Effect of Si2+ Ion Beam Irradiation on Performance of C/C-ZrC-SiC Composites[J]. 材料研究学报, 2023, 37(6): 472-480.
[4] MIAO Qi, ZUO Xiaoqing, ZHOU Yun, WANG Yingwu, GUO Lu, WANG Tan, HUANG Bei. Pore Structure, Mechanical and Sound Absorption Performance for Composite Foam of 304 Stainless Steel Fiber/ZL104 Aluminum Alloy[J]. 材料研究学报, 2023, 37(3): 175-183.
[5] LIN Shifeng, XU Dongan, ZHUANG Yanxin, ZHANG Haifeng, ZHU Zhengwang. Preparation and Mechanical Properties of TiZr-based Bulk Metallic Glass/TC21 Titanium Alloy Dual-layered Composites[J]. 材料研究学报, 2023, 37(3): 193-202.
[6] XIE Donghang, PAN Ran, ZHU Shize, WANG Dong, LIU Zhenyu, ZAN Yuning, XIAO Bolv, MA Zongyi. Effect of Reinforced Particle Size on the Microstructure and Tensile Properties of B4C/Al-Zn-Mg-Cu Composites[J]. 材料研究学报, 2023, 37(10): 731-738.
[7] WANG Yankun, WANG Yu, JI Wei, WANG Zhihui, PENG Xiangfei, HU Yuxiong, LIU Bin, XU Hong, BAI Peikang. Microstructure and Mechanical Properties of Carbon Fiber/Aluminum Laminated Composites[J]. 材料研究学报, 2022, 36(7): 536-544.
[8] ZONG Ping, LI Shiwei, CHEN Hong, MIAO Sainan, ZHANG Hui, LI Chao. In-situ Thermolysis Preparation of Carbon Capsulated Nano-copper and Its Stability[J]. 材料研究学报, 2022, 36(11): 829-836.
[9] ZONG Yixun, LI Shufeng, LIU Lei, ZHANG Xin, PAN Deng, WU Daihuiyu. Interface Regulation and Strengthening Mechanism of GNP-Ni/Cu Composites[J]. 材料研究学报, 2022, 36(10): 777-785.
[10] HOU Jing, YANG Peizhi, ZHENG Qinhong, YANG Wen, ZHOU Qihang, LI Xueming. Preparation and Performance of Graphite/TiO2 Composite Photocatalyst[J]. 材料研究学报, 2021, 35(9): 703-711.
[11] YANG Yana, CHEN Wenge, XUE Yuanlin. Interficial Bonding within Cu-based Composites Reinforced with TiC- or Ni-coated Carbon Fiber[J]. 材料研究学报, 2021, 35(6): 467-473.
[12] LI Wanxi, DU Yi'en, GUO Fang, CHEN Yongqiang. Preparation and Electromagnetic Properties of CoFe2O4-Co3Fe7 Nanoparticles and CoFe2O4/Porous Carbon[J]. 材料研究学报, 2021, 35(4): 302-312.
[13] HU Manying, OUYANG Delai, CUI Xia, DU Haiming, XU Yong. Properties of TiC Reinforced Ti-Composites Synthesized in Situ by Microwave Sintering[J]. 材料研究学报, 2021, 35(4): 277-283.
[14] SONG Yuehong, DAI Weili, XU Hui, ZHAO Jingzhe. Preparation and Photocatalytic Properties of g-C3N4/Bi12O17Cl2 Composites[J]. 材料研究学报, 2021, 35(12): 911-917.
[15] TAN Xi, SONG Yuzhe, SHI Xin, QIANG Jin, WEI Tingxuan, LU Qihai. Magnetization Reversal Field and Magneto-Resistor of Spin Valve[J]. 材料研究学报, 2020, 34(4): 272-276.
No Suggested Reading articles found!