Chin J Mater Res  2010, Vol. 24 Issue (6): 603-609    DOI:

论文 Current Issue | Archive | Adv Search |

Influence of Curing Temperature on Anti-corrosion Properties of Silicone Based Composite Coatings with Low Infrared Emissivity

WANG Yajun, XU Guoyue, CHEN Huimin, LI Jiufen

College of Material Science and Technology, Nanjing University of Aeronautics & Astronautics, Nanjing 210016

WANG Yajun XU Guoyue CHEN Huimin LI Jiufen. Influence of Curing Temperature on Anti-corrosion Properties of Silicone Based Composite Coatings with Low Infrared Emissivity. Chin J Mater Res, 2010, 24(6): 603-609.

Abstract References Related Articles Recommended Metrics Download:  PDF(1188KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The low infrared emissivity coatings were prepared by using epoxy modified silicone (EA) and Al powder (mass ratio 3:2) as organic adhesive and pigment respectively. The influence of the curing temperature on anti-corrosion properties of the coatings was researched. The chemical composition and the surface structure of EA/40% Al coating were characterized, and the corrosion behavior was investigated by the electrochemical method and anti-corrosion tests. The results show that the coatings curied at 200oCexhibit the excellent salt spray resistance, anti ultraviolet ageing performance and hot-wet resistance, which can reach the requirements of engineering applications. Key words:  functional material       coatings       curing       epoxy modified silicone       infrared emissivity       anticorrosion properties      Received:  26 April 2010      ZTFLH:  TQ324.2     TQ323.5   Fund:  Supported by National Nature Science Foundation of China No.90505008. Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors YU Ya-Jun XU Guo-Ti CHEN Hui-Min LI Jiu-Fen URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2010/V24/I6/603 [1] 游毓聪，杜仕国，施冬梅．红外隐身涂料黏合剂的应用与研究[J]．特种涂料与涂装，2006，16(7)：50–54． You Yucong，Du Shiguo，Shi Dongmei．Application and Research of the Infrared Camouflage Coatings[J]．Modern Paint & Finishing，2006，16(7)：50–54． [2] Zueco J，Alhama F．Inverse estimation of temperature dependent emissivity of solid metals[J]．Journal of Quantitative Spectroscopy and Radiative Transfer，2006，101(1)：73–86． [3] 张卫东，冯小云，孟秀兰．国外隐身材料研究进展[J]．宇航材料工艺，2000，30(3)：1–4． Zhang Weidong，Feng Xiaoyun，Meng Xiulan．Status and Development of Foreign Study on New Stealthy Materials[J]．Aerospace Materials & Technology，2000，30(3)：1–4． [4] ARONSON J R．Modeling the infrared reflectance and emittance of paints and coating[R]．AD–A110824， 1982． [5] 徐文兰，罗宁胜，张珉．非均匀涂层的热辐射[J]．红外研究，1990，9(5)：384-388． Xu Wenlan，Luo Ningsheng，Zhang Min．Thermal radiation of inhomogeneous coatings[J]．Infrared Research，1990，9(5)：384–388． [6] Xie Guohua，Zhang Zuoguang，Wu Ruibin．Matching performance among visible and near infrared coating， low infrared emitting coating and microwave absorbing coating[J]．Journal of Wu Han University of Technology，Materials Science，2005，20(4)：55–59． [7] Wang B，Sun X Q，Wang Z R．Study on stealth effect evaluation of infrared coating[J]．Chinese Journal of Quantum Electronics，2004，21(4)：538–541． [8] Wang T W，Cheng C L，Zhang Q T．Study on low infrared emissivity of coating in 8-14μm[J]．Optical Technique，2005，31(4)：598–600． [9] 琼斯 J．隐身技术[M]．洪旗，魏海滨，译．北京：航空工业出版社，1991：52–72． [10] 余慧娟，徐国跃，邵春明．EPDM基涂层在8～14μm波段红外低发射率的研究[J]．红外技术，2008，30(3)：154–157． Yu Huijuan，Xu Guoyue，Shao Chunming．Study on Low Infrared Emissivity Coatings with EPDM adhesive in 8～14μm[J]．Infrared Technology，2008，30(3)：154–157． [11] 崔志明，杨亚江．环氧树脂固化度对粉末涂层性能的影响[J]．塑料工业，2001，29(3)：37–39． [12] 张宝华，叶俊丹，陈斌．固化温度对环氧树脂固化物性能的影响[J]．塑料工业，2009，37(9)：64–66． [13] 洪旭辉，李亚锋．氰酸酯改性环氧树脂耐热性研究[J]．热固性树脂，2009，24(5)：14–16． [14] 邵春明，徐国跃，余慧娟．改性三元乙丙橡胶用于红外隐身涂层的研究[J]．宇航材料工艺，2008，(3)：62–65． [15] 余慧娟，徐国跃，沈轩．8～14 μm 波段低发射率涂料的制备与优化研究[J]．兵器材料科学与工程，2008，31(6)：49–52． [16] K.H. Wu， C.M. Chao， T.F. Yeh．Thermal stability and corrosion resistance of polysiloxane coatings on 2024-T3 and 6061-T6 aluminum alloy[J] ．Surface & Coatings Technology，201 (2007)：5782–5788 [17] Fu-Sheng Chuang，Hung-Yi Tsi，Jing-Dong Chow． Thermal degradation of poly(siloxane-urethane) copolymers[J] ． Polymer Degradation and Stability，93 (2008)：1753–1761 [18] Jwlwna D J, Milutin N G. The thermogravimetric analysis of some polysiloxanes[J].Polymer Degradation and Stability, 1998, 61:87-93． [19] 杨丽霞，张三平，林安．有机涂层渗水率及金属涂层界面腐蚀的研究进展[J]．材料保护，2001，34(10)． [20] Huijuan Yu，Guoyue Xu，Xingmei Shen．Preparation of leafing Cu and its application in low infrared emissivity coatings[J] ．Journal of Alloys and Compounds，484(2009)：395–399． [21] 骆素珍，郑玉贵，李劲．环氧粉末涂层中介质传输的交流阻抗谱特征[J]．腐蚀科学与防护技术，2001，13(4)：199–20． [22] 杨光，黄鹏程．环氧共混树脂的光固化及其表面化学反应[J]．北京航空航天大学学报，2008，34(6)：618–621． [23] 徐永祥，严川伟，丁杰．紫外光对涂层的老化作用[J]．中国腐蚀与防护学报，2004，24(3)：168–173． [1] ZENG Zhipeng, SONG Xiaoyan, SUN Yong, SONG Shuanglin, LU Wei, HE Zhenglong. Microstructure and Mechanical Property of Polyurethane/Water Glass Grouting Materials during Curing Process[J]. 材料研究学报, 2022, 36(11): 855-861. [2] LI Rui, WANG Hao, ZHANG Tiangang, NIU Wei. Microstructure and Properties of Laser Clad Ti2Ni+TiC+Al2O3+CrxSy Composite Coating on Ti811 Alloy[J]. 材料研究学报, 2022, 36(1): 62-72. [3] CHEN Yiwen, WANG Cheng, LOU Xia, LI Dingjun, ZHOU Ke, CHEN Minghui, WANG Qunchang, ZHU Shenglong, WANG Fuhui. Protective Performance of a Novel Inorganic Composite Coatings on CB2 Ferritic Heat Resistant Steel at 650℃ in Oxygen Flow with Water Vapor[J]. 材料研究学报, 2021, 35(9): 675-681. [4] JIA Yuan, ZHANG Liying, MA Mingyang, SHI Ruifeng. Preparation of Si-containing Benzoxazine and Its Influence on Curing Reaction Kinetics of Bismaleimide Ester Resin[J]. 材料研究学报, 2020, 34(6): 459-465. [5] Yao DU,Cheng WANG,Shenglong ZHU,Fuhui WANG. High Temperature Oxidation and Electrochemical Corrosion Behavior of Al Nano-particle Modified Silicone Coating on 304 Stainless Steel[J]. 材料研究学报, 2019, 33(12): 942-948. [6] Fei LIU, Min LIU, Jie MAO, Ziqian DENG, Jingtao MA, Changguang DENG, Dechang ZENG. Influence of H2 Flow Rate on Structure and Erosion Resistance of Thermal Barrier Coatings Prepared by Plasma Spray-Physical Vapor Deposition[J]. 材料研究学报, 2018, 32(9): 641-646. [7] Shuohong GAO, Min LIU, Xiaojun PANG, Xiaofeng ZHANG, Changguang DENG, Xinghua LIANG, Chunming DENG. Fabrication and Properties of Super-hydrophobic Composite Coatings[J]. 材料研究学报, 2018, 32(7): 502-512. [8] Jin ZHANG, Ning WANG, Chong ZHAO, Jiaxing LI, Tianchi ZHANG. Synthesis and Performances of Silver Vanadate For Battery of Implantable Medical Devices[J]. 材料研究学报, 2018, 32(7): 555-560. [9] Qiushi GAO, Hua YAN, Yang QIN, Peilei ZHANG, Zhengfei CHEN, Jialong GUO, Zhishui YU. Self-lubricating Wear Resistant Composite Coating Ti-Ni+TiN+MoS2/TiS Prepared on Ti-6Al-4V Alloy by Laser Cladding[J]. 材料研究学报, 2018, 32(12): 921-928. [10] Siyang LIU, Ping CHEN, Xuhai XIONG, Qi YU. Synthesis and Property of Bismaleimide Resins Containing Fluorene Cardo and Cyano Groups[J]. 材料研究学报, 2018, 32(11): 820-826. [11] Linlin GAO, Leida ZHANG, Qinglin WANG, Hui YE, Guoshun WAN, Mingshun JIANG, Yuxi JIA. Curing Behavior of Epoxy Resin Packaging Material Based on FBG Online Monitoring Technique[J]. 材料研究学报, 2018, 32(10): 737-742. [12] Qifeng JIN,Dongyue JIANG,Lina TONG,Liyuan TAN. Simultaneously Toughening and Reinforcing Modification of Benzoxazineresin with Hyperbranched Epoxy[J]. 材料研究学报, 2017, 31(2): 145-151. [13] Yu WANG, Minqi SHENG, Wenping WENG, Jifang XU, Mengqiu CAO. Electrocatalytic Hydrogen Evolution Reaction on Electrodeposited Amorphous Co-W Alloy Coatings in Alkaline Solution[J]. 材料研究学报, 2017, 31(10): 773-780. [14] Dongze LV,Zhaoke CHEN,Xiang XIONG,Yalei WANG,Wei SUN,Zehao LI. Microstructure and Tribological Property of C-TaC Coatings on Graphite Prepared by Chemical Vapor Deposition[J]. 材料研究学报, 2016, 30(9): 690-696. [15] LI Yufeng, ZHU Jingjing, GAO Xiaohui, XU Ying. Preparation of Polyaniline Microemulsion and Anticorrosion Performance of Its Composite Coatings with Versatate-Fluoro-Acrylate Emulsion[J]. 材料研究学报, 2016, 30(2): 131-140. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed