Research on the Combined Properties of Fe/Al2O3 Graded Coatings

Chin J Mater Res

2010, Vol. 24

Issue (4): 401-405 DOI:

论文

Current Issue | Archive | Adv Search

Research on the Combined Properties of Fe/Al₂O₃ Graded Coatings

LIU Jianfei, WANG Zhi, DING Yinsen

Cite this article:

LIU Jianfei WANG Zhi DING Yinsen. Research on the Combined Properties of Fe/Al₂O₃ Graded Coatings. Chin J Mater Res, 2010, 24(4): 401-405.

Download:

PDF(798KB)
Export: BibTeX | EndNote (RIS)

Abstract

Fe/Al2O3 graded coatings on steel substrate was prepared by spraying and sol-gel, while the mixed powders FeAl and FeAlNi were used as two different transitional layers, and the combined properties of the coatings were analyzed. The results show that the adhesive strength of Fe/Al2O3 graded coatings with the FeAl and FeAlNi transitional layers reach the highest, 21.2 MPa and 25.3 MPa, respectively, when the sintering temperature is 1220℃ . Two kind of coating composed respectively of α–Al2O3, AlFeO3, Al2Fe2O6, Al3Fe5O12 and α–Al2O3, AlFeO3, NiFe2O4. It can be seen that the Fe/Al2O3 graded coatings with FeAlNi transitional layer are much denser than the coatings with FeAl transitional layer, and there is not obvious hole and macroscopic interface, while some organization , which similar to the branch appeared in the coatings, increase the combined properties of Fe/Al2O3 graded coatings.

Key words: composites Fe/Al2O3 graded coatings spraying sol-gel combined property

Received: 19 April 2010

ZTFLH:

TB333

Fund:

Supported by Nature Science Foundation of Shandong province No.Y2006F53 and Dr. Foundation of the University of Jinan No.B0514.

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	LIU Jian-Fei
	YU Zhi

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2010/V24/I4/401

[1] ZENG Aixiang, TANG Shaoqiu, Ceramic coatings preparation、application and developing derection to metallic-matrix, Journal of Ceramic, 13(4), 7(1998) (曾爱香，唐绍裘，金属基陶瓷涂层的制备、应用及发展，陶瓷研究, 13(4), 7(1998)) [2] ZhANG Jingde, YIN Yansheng, LI Jing, ZHANG Hong, Fabrication and properties of Fe3Al- Al2O3 graded coating, Journal of Materials Processing Technology, 134,206(2003) [3]ZhANG Jingde, YIN Yansehng, ZhANG Hong, LI Jing, Research on the properties of Fe3Al-A l2O 3 Graded Coatings, Journal of Materials Engineering, (4):6-9( 2003) (张景德，尹衍升，张虹，李静，Fe3Al- Al2O3陶瓷梯度涂层性能研究，材料工程，(4):6-9( 2003)) [4] YIN Yansehng, GAO Zhenmin, ZHANG Jingde, LI Jia, CHEN Kun, LU Yao, Study on thermal-shock resistance of Fe3Al- Al2O3 composites graded coatings, Journal of the Chinese Ceramic Society, 31(9),867-872(2003) (尹衍升，高振民，张景德，李嘉，陈坤，卢瑶，Fe3Al/Al2O3陶瓷复合梯度涂层抗热震性能研究，硅酸盐学报，31(9),867-872(2003)) [5] LIU Yingcai, YIN Yansehng, WANG Xin, ZHANG Jingde, Thermal-mechanical Properties of Fe3Al/Al2O3 Composite Graded Coatings, Journal of Aeronautical Materials, 25(3),5(2005) (刘英才，尹衍升，王昕，张景德，Fe-Al/Al2O3梯度涂层制备过程中的热机械行为，航空材料学报，25(3),5(2005)) [6] ZhANG Jingde, SUN Kangning, WANG Jiangting, et al. Sliding wear behavior of plasma sprayed Fe3Al- Al2O3 graded coatings, Thin Solid Films, 516:5681(2008) [7] XU Hengjun, Fundamentals of materials science, (Beijing, Beijing Industrial University Press,2001)p.228 (徐恒钧，材料科学基础，(北京：北京工业大学出版社，2001)p.228) [8] ZHANG Jinling, CUI HOngzhi, ZHAO Jianbo, LI Yinjun, Microstructure and properties of Cr-Al2O3 cermet coating obtained by plasma in situ synthesis, Heat Treatment of Metals, 31(11),17(2006)) (张金玲,崔洪芝,赵剑波,李银俊，等离子原位合成Cr-Al2O3金属陶瓷涂层的组织与性能，金属热处理，31(11),16(2006)) [9] ZHANG Jingde, Fabrication of Fe-Al/Al2O3 functionally graded coatings and research on its thermal-mechanical behaviors and properties, Ph.D.Dissertation, Shandong University(2002) (张景德，Fe-Al/Al2O3功能梯度涂层制备及其热机械行为与性能研究，博士学位论文，山东大学(2002))

[1]	JI Yuchen, LIU Shuhe, ZHANG Tianyu, ZHA Cheng. Research Progress of MXene Used in Lithium Sulfur Battery[J]. 材料研究学报, 2023, 37(7): 481-494.
[2]	ZHANG Tengxin, WANG Han, HAO Yabin, ZHANG Jiangang, SUN Xinyang, ZENG You. Damping Enhancement of Graphene/Polymer Composites Based on Interfacial Interactions of Hydrogen Bonds[J]. 材料研究学报, 2023, 37(6): 401-407.
[3]	SHAO Mengmeng, CHEN Zhaoke, XIONG Xiang, ZENG Yi, WANG Duo, WANG Xuhui. Effect of Si²⁺ Ion Beam Irradiation on Performance of C/C-ZrC-SiC Composites[J]. 材料研究学报, 2023, 37(6): 472-480.
[4]	MIAO Qi, ZUO Xiaoqing, ZHOU Yun, WANG Yingwu, GUO Lu, WANG Tan, HUANG Bei. Pore Structure, Mechanical and Sound Absorption Performance for Composite Foam of 304 Stainless Steel Fiber/ZL104 Aluminum Alloy[J]. 材料研究学报, 2023, 37(3): 175-183.
[5]	LIN Shifeng, XU Dongan, ZHUANG Yanxin, ZHANG Haifeng, ZHU Zhengwang. Preparation and Mechanical Properties of TiZr-based Bulk Metallic Glass/TC21 Titanium Alloy Dual-layered Composites[J]. 材料研究学报, 2023, 37(3): 193-202.
[6]	XIE Donghang, PAN Ran, ZHU Shize, WANG Dong, LIU Zhenyu, ZAN Yuning, XIAO Bolv, MA Zongyi. Effect of Reinforced Particle Size on the Microstructure and Tensile Properties of B₄C/Al-Zn-Mg-Cu Composites[J]. 材料研究学报, 2023, 37(10): 731-738.
[7]	WANG Yankun, WANG Yu, JI Wei, WANG Zhihui, PENG Xiangfei, HU Yuxiong, LIU Bin, XU Hong, BAI Peikang. Microstructure and Mechanical Properties of Carbon Fiber/Aluminum Laminated Composites[J]. 材料研究学报, 2022, 36(7): 536-544.
[8]	ZONG Ping, LI Shiwei, CHEN Hong, MIAO Sainan, ZHANG Hui, LI Chao. In-situ Thermolysis Preparation of Carbon Capsulated Nano-copper and Its Stability[J]. 材料研究学报, 2022, 36(11): 829-836.
[9]	ZONG Yixun, LI Shufeng, LIU Lei, ZHANG Xin, PAN Deng, WU Daihuiyu. Interface Regulation and Strengthening Mechanism of GNP-Ni/Cu Composites[J]. 材料研究学报, 2022, 36(10): 777-785.
[10]	HOU Jing, YANG Peizhi, ZHENG Qinhong, YANG Wen, ZHOU Qihang, LI Xueming. Preparation and Performance of Graphite/TiO₂ Composite Photocatalyst[J]. 材料研究学报, 2021, 35(9): 703-711.
[11]	YANG Yana, CHEN Wenge, XUE Yuanlin. Interficial Bonding within Cu-based Composites Reinforced with TiC- or Ni-coated Carbon Fiber[J]. 材料研究学报, 2021, 35(6): 467-473.
[12]	LI Wanxi, DU Yi'en, GUO Fang, CHEN Yongqiang. Preparation and Electromagnetic Properties of CoFe₂O₄-Co₃Fe₇ Nanoparticles and CoFe₂O₄/Porous Carbon[J]. 材料研究学报, 2021, 35(4): 302-312.
[13]	HU Manying, OUYANG Delai, CUI Xia, DU Haiming, XU Yong. Properties of TiC Reinforced Ti-Composites Synthesized in Situ by Microwave Sintering[J]. 材料研究学报, 2021, 35(4): 277-283.
[14]	SONG Yuehong, DAI Weili, XU Hui, ZHAO Jingzhe. Preparation and Photocatalytic Properties of g-C₃N₄/Bi₁₂O₁₇Cl₂ Composites[J]. 材料研究学报, 2021, 35(12): 911-917.
[15]	CHENG Shijie, WANG Chenyang, YIN Shuyi, ZHANG Hongwei, ZUO Danying. Effect of Surface Spraying Chitosan Solution on Structure and Properties of Polyvinylidene Fluoride Porous Membrane[J]. 材料研究学报, 2020, 34(6): 466-472.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed