Please wait a minute...
Chin J Mater Res  2008, Vol. 22 Issue (4): 439-443    DOI:
Research Articles Current Issue | Archive | Adv Search |
A novel synthesis method for lithium iron phosphate cathode material
ZHANG Jun-Xi;;;;
上海电力学院
Cite this article: 

ZHANG Jun-Xi. A novel synthesis method for lithium iron phosphate cathode material. Chin J Mater Res, 2008, 22(4): 439-443.

Download:  PDF(1042KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  this paper describes a new synthesis route to prepare LiFePO4 cathode material. The novel aspect of the synthesis is based on a critical step involving the addition of CuO powder to promote the dissolve of Fe powder in Phosphate acid solution. The materials were characterized by thermogravimetric and differential thermal analysis, X-ray powder diffraction, Scanning electron microscopy and electrochemical measurements. Results shows that the prepared LiFePO4 materials display good electrochemical performance, suggests that the synthesis route has the possibility of an easy scale-up to an industrial process.
Key words:       
Received:  15 September 2007     
ZTFLH:  TM912.9  

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2008/V22/I4/439

1 M.Takahashi,S.Tobishima,K.Takei,Y.Sakurai,Charac- terization of LiFePO4 as the cathode material for recharge- able lithium batteries,J.Power Sources,97-98,508- 511(2001)
2 A.K.Padhi,K.S.K.Nanjundoswamy,C.Masquelier, S.Okada,J.B.Goodenough,Effect of structure on Fe~(3+)/Fe~(2+)redox couple in iron phosphates,J.Elec- trochem.Soc.,144,1609-1913(1997)
3 J.Barker,M.Y.Saidi,J.L.Swoyer,Lithium iron(Ⅱ) pohospho-olivine prepared by a novel carbontherma re- duction method,Electrochem.Solid State Lett.,6,A53- A55(2003)
4 A.A.salah,A.Mauger,K.Zaghib,J.B.Goodenough, N.Ravet,M.Gauthier,F.Gendron,C.M.Julien,Reduction Fe~(3+)of impurities in LiFePO_4 from pyrolysis of organic precursor used for carbon deposition,J.Electrochem. Soc.,153,A1692-A1701(2006)
5 P.P.Prosini,M.Carewska,S.Scaccia,P.Wisniewski, S.Passerini,M.Pasquali,A new synthetic route for preparing LiFePO_4 with enhanced electrochemical per- formance,J.Electrochem.Soc.,149,A886-A890(2002)
6 S.Yang,Y.Peter,M.Zavalij,S.Whittingham,Hydrother- mal synthesis of lithium iron phosphate electrodes,Elec- trochemistry communication,3,505-508(2001)
7 J.Chen,M.S.Whittingham,Hydrothermal synthesis of lithium iron phosphate,Electrochemistry communication, 8,855-858(2006)
8 A.D.Spong,G.Vitins,J.R.Owen,A solution-precursor synthesis of carbon-coated LiFePO_4 for Li-ion cells,J. Electrochem.Soc.,152,A2376-A2382(2005)
9 J.S.Yang,J.J.Xu,Nonaqueous Sol-Gel synthesis of high performance LiFePO_4,Electrochem.Solid State Lett.,7, A515-A518(2004)
10 G.X.Wang,S.L.Bewlay,K.Konstantinov,H.K.Liu, S.X.Dou,Physical and electrochemical properties of doped lithium iron phosphate electrodes,Electrochimica Acta,50,443-447(2004)
11 A.Yamada,M.Hosoya,S.C.Chung,Olivine type cathodes achievement and problems,J.Power Sources,119-121, 232-238(2003)
12 M.Higuchi,Y.Azuma,Synthesis of LiFePO_4 cathode ma- terial by microwave processing,J.Power Sources,119- 121,258-261(2003)
13 S.Franger,F.L.Cras,C.Bourbon,H.Rouault,Comparison between different LiFePO_4 synthesis routes and their influ- ence on its physico-chemical properties,J.Power Sources, 119-121,252-257(2003)
14 CAO Chu'nan,The principle of corrosion electrochem- istry,Beijing,Chemical Industry Press,1985,p.147 (曹楚南,腐蚀电化学原理(北京,化学工业出版社,1985年) p.147)
15 F.Crose,A.D.Epifanio,J.Hassoun,A.Deptula,T.Olczac, B.Scrosati,A novel concept for the synthesis of an im- proved LiFePO_4 lithium battery cathode,Electrochem. Solid-State Lett.,5,A47-A50(2002)
16 D.P.Chen,A.Maljuk,C.T.Lin,Floating Zone growth of lithium iron(Ⅱ)phosphate single crystals,J.Crystal Growth,284,86-90(2005)
[1] Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2] . [J]. 材料研究学报, 2006, 20(4): 348-353.
[3] . [J]. 材料研究学报, 2006, 20(2): 191-196.
[4] . [J]. 材料研究学报, 2006, 20(3): 322-326.
[5] . [J]. 材料研究学报, 2002, 16(4): 425-428.
[6] Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7] . [J]. 材料研究学报, 2005, 19(6): 651-656.
[8] SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9] ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10] . [J]. 材料研究学报, 2003, 17(4): 433-438.
[11] LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12] HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13] CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14] Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15] . [J]. 材料研究学报, 2001, 15(3): 303-307.
No Suggested Reading articles found!