Please wait a minute...
Chin J Mater Res  2008, Vol. 22 Issue (4): 369-373    DOI:
Research Articles Current Issue | Archive | Adv Search |
Preparation of semi-solid AlSi7Mg alloy slurry through traveling electromagnetic stirring
;
北京科技大学材料科学与工程学院材料加工系
Cite this article: 

;. Preparation of semi-solid AlSi7Mg alloy slurry through traveling electromagnetic stirring. Chin J Mater Res, 2008, 22(4): 369-373.

Download:  PDF(798KB) 
Export:  BibTeX | EndNote (RIS)      
Key words:       
Received:  13 September 2007     
ZTFLH:  TG146  
  TG244  
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2008/V22/I4/369

1 D.B.Spencer,R.Mehrebian,M.C.Flemings,Rheological behavior of Sn-15Pb in the crystallization range,Metall Trans,3(7),1925(1972)
2 M.C.Flemings,R.G.Riek,K.P.Young,Rheocasting, Mater.Sci and Eng.,25,103(1976)
3 M.C.Flemings,Behavior of metal alloys in the semi-solid state,Metall Trans,22A(5),957-981(1991)
4 XIE Shuisheng,HUANG Shenghong,The technology and application of Semi-solid metal processing(Beijing,Met- allurgical industry press,1999) (谢水生,黄声宏,半固态金属加工技术及其应用(北京,冶金工业出版社,1999)p.130)
5 MAO Weimin,Semi-solid metal forming technology(Bei- jing,Machinery industry press,2004) (毛卫民,半固态金属成形技术(北京,机械工业出版社,2004) p.357)
6 S.P.Midson,The commercial status of semi-solid casting in the USA,in:Proc of the 4th Int Conf on Semi-solid Processing of Alloys and Composites,edited by D.H. Kirkwood and P.Kapranos(University of Sheffield,Eng- land,UK,Department of Engineering Materials,Univer- sity of Sheffield,1996)p.251
7 K.P.Young,C.P.Kyonka,J.A.Courtoris,Fine grained metal composition.US Patent,4415347,1983
8 V.I.Dobatkin,G.I.Eskin,Ingots of aluminum alloys with nondendritic structure produced by ultrasonic treatment for deformation in the semi-solid state,in:Proc of the 4th Int Conf on Semi-solid Processing of Alloys and Compos- ites,edited by D.H.Kirkwood and P.Kapranos(University of Sheffield,England,UK,Department of Engineering Ma- terials,University of Sheffield,1996)p.193
9 HU Hanqi,The Metal Solidification Theory,2nd edition, (Beijing,Machinery Industry Press,2000)p.109 (胡汉起,金属凝固原理,第2版,(北京,机械工业出版社,2000) p.109)
10 MAO Weimin,ZHAO Aimin,CUI Chenglin,ZHONG Xueyou,The formation mechanism of non-dendritic pri- maryα-Al phases in semi-solid AlSi7Mg alloy,Acta Met- all.Sinica,35(9),971(1999) (毛卫民,赵爱民,崔成林,钟雪友,电磁搅拌对半固态AlSi7Mg合金初生α-Al的影响规律,金属学报,35(9),971(1999))
11 GAO Songfu,Mao Weimin,Bai Yuelong,Li Qiang,Fill- ing ability of semi-solid A356 alloy in rheo-casting and microstructure distribution,Special Casting & Nonferrous Alloys,10,598-599(2005) (高松福,毛卫民,白月龙,李强,半固态A356铝合金的流变压铸充填性与组织分布,特种铸造及有色合金,10,598—599(2005))
12 MAO Weimin,BAI Yuelong,TANG Guoxing,Prepara- tion for semi-solid aluminum alloy slurry under weak elec- tromagnetic stirring condition,J.Mater.Sci.Technol., 22(4),447(2006)
13 LIU Zheng,MAO weimin,ZHAO Zhenduo,Preparation of semi-solid slurry of aluminum alloys by a new technology, Chinese J.Mater.Research,20(2),125(2006) (刘政,毛卫民,赵振铎,用新工艺制备半固态铝合金浆料,材料研究学报,20(2),125(2006))
14 TIAN Zhanfeng,ZHANG zhifeng,XU Jun,Shi Likai.The MSCP process semisolid slurry production.Proceed- ings of the 9th International Conference on Semi-Solid Processing of Alloys and Composites.Busan Korea,Sep- tember,11-13,362-365(2006)
15 E.Cardoso,H.V.Atkinson,H.Jones,Microstructural evo- lution of A356 during NRC processing.Proc of the 8th Int Conf on Semisolid Processing of Alloys and Compos- ites,edited by A.Alexandrou,D.Apelian and G.Georgiou (Limassol,Cyprus,University of Cyprus,2004)p.296
16 PAN Ye,ZHANG Chunyan,YUAN Haoyang,SUN Guox- long,Effect of metal flow at initial solidification on gran- ular primary crystal formation in semi-solid alloy,Acta Metall.Sinica,37(10),1035(2001) (潘冶,张春燕,袁浩扬,孙国雄,结晶初期熔体流动对半固态合金粒状初晶形成的作用,金属学报,37(10),1035(2001))
17 MAO Weimin,ZHEN Zisheng,CHEN Hongtao,Mi- crostructure of semi-solid AZ91D alloy solidified during electromagnetic stirring,Chinese J.Mater.Research, 19(3),303(2005) (毛卫民,甄子胜,陈洪涛,电磁搅拌对半固态AZ91D镁合金组织的影响,材料研究学报,19(3),303(2005))
18 J.A.Yurko,R.A.Martinez,M.C.Flemings,Development of the semi-solid rheocasting(SSR)process,in:Proc of the 7th Int Conf on Semi-solid Processing of Alloys and Com- posites,edited by Y.Tsutsui,M.Kiuchi and K.Ichikawa (Tsukuba Japan,National Institute of Advanced Indus- trial Science and Technology,Japan Society for Technol- ogy of Plasticity,2002)p.659X
[1] Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2] . [J]. 材料研究学报, 2006, 20(4): 348-353.
[3] . [J]. 材料研究学报, 2006, 20(2): 191-196.
[4] . [J]. 材料研究学报, 2006, 20(3): 322-326.
[5] . [J]. 材料研究学报, 2002, 16(4): 425-428.
[6] Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7] . [J]. 材料研究学报, 2005, 19(6): 651-656.
[8] SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9] ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10] . [J]. 材料研究学报, 2003, 17(4): 433-438.
[11] LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12] HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13] CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14] Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15] . [J]. 材料研究学报, 2001, 15(3): 303-307.
No Suggested Reading articles found!