|
|
|
| 在单分子膜上电沉积金属银膜 |
| 姚素薇;余碧涛; 刘恒权; 张卫国 |
| 天津大学 |
|
引用本文:
姚素薇; 余碧涛; 刘恒权; 张卫国 . 在单分子膜上电沉积金属银膜[J]. 材料研究学报, 2002, 16(6): 580-584.
1 Wu Shiping,Liu Dongrong,Guo Jingjie,Li Changyun,Su Yanqing,Fu Hengzhi,Numerical simulation of microstruc- ture evolution of Ti-6Al-4V alloy in vertical centrifugal casting,Materials Science and Engineering A,426,240- 249(2006)
2 Halvaee A,Talebi A,Effect of process variables on mi- crostructure and segregation in centrifugal casting of C92200 alloy,Journal of Materials Processing Technology, 118(1-3),123-127(2001)
3 G Chirita,D Soares,F S Silva,Advantages of the cen- trifugal casting technique for the production of structural components with Al-Si alloys,Materials and Design,29, 20-27(2008)
4 R.A.Mesquita,D.R.Leiva,A.R.Yavari,W.J.Botta Filho, Microstructures and mechanical properties of bulk AlFeNd(Cu,Si) alloys obtained through centrifugal force casting,Materials Science and Engineering A,452-453, 161-169(2007)
5 LI Qingchun,Basis of Cast Forming Theory(Beijing, China Machine Press,1982) p.187-199 (李庆春，铸件形成理论基础(北京，机械工业出版社，1982) p．187-199)
6 Kun-Dar Li,Edward Chang,Mechanism of nucleation and growth of hydrogen porosity in solidifying A356 aluminum alloy:an analytical solution,Acta Materialia,52,219- 231(2003)
7 ZHANG Boning,Centrifugal Casing(Beijing,China Ma- chine Press,2004) p.50-65 (张伯明，离心铸造(北京，机械工业出版社，2004)p．50-65)
8 TAN Yingyuan,Reasons for Producing Gas Hole and Pre- vention Measurement under Centrifugal Casting for Al-Si Alloy,Journal of Wuhan Institute of Shipbuilding Tech- nology,1,28-29(2003) (谭银元，Al-Si合金离心铸造产生气孔的原因及防止措施，武汉船舶职业技术学院学报，1，28-29(2003))
9 Wu.M,Auqthun.M,Wagner.I,Sahm.P.R,Spieker- mann.H,Numerical simulation of the casting process of titanium tooth crowns and bridges,Journal of Materials Science:Materials in Medicine,12(6),485-490(2001)
10 SHENG Wenbin,GUO Jingjie,SU Yanqing,DING Hong- sheng,JIA Jun,Analysis on inner defects in TiAl based alloy exhaust valve during the centrifugal foundry process in permanent mold,Journal of Aeronautical Materials, 20(2),40-45(2000) (盛文斌，郭景杰，苏彦庆，丁宏升，贾均，TiAl基合金排气阀金属型离心铸造过程内部缺陷分析，航空材料学报，20(2)，40- 45(2000))
11 Suzuki Ken-ichiro,Nishikawa Koji,Watakabe Sirou,Mold filling and solidification during centrifugal precision cast- ing of Ti-6Al-4V alloy,Materials Transactions,JIM, 37(12),1793-1801(1996)
12 J Wannasin,M C Flemings,Fabrication of metal ma- trix composites by a high-pressure centrifugal infiltration process,Journal of Materials Processing Technology,169, 143-149(2005)
13 GUO Jingjie,FU Hengzhi,Alloy Melts and Its Treatment (Beijing,China Machine Press,2004) p.187-207 (郭景杰，傅恒志，合金熔体及其处理(北京，机械工业出版社，2004)p．187-207)
14 ZHAI Qijie,GUAN Shaokang,SHANG Quanyi,thermo- dynamics of alloys Theory and application(Beijing,Met- allurgical Industry Press,1999) p.121-138 (翟启杰，关绍康，商全义，合金热力学理论及其应用(北京，冶金工业出版社，1999)p．121—138)
15 Institute of Metallurgy Chinese academy of sciences trans- late,Casting properties for Titanium alloys in Foreign Countries(Shanghai,Shanghai science and Technology in- formation research institute press,1974) p.34-36 (中国科学院冶金研究所译，国外钛合金的铸造性能(上海，上海科学技术情报研究所出版，1974)p．34-36)
16 XU Zuyao,Phase Transformations Under Stress,Heat Treatment,19(2),1-17(2004) (徐祖耀，应力作用下的相变，热处理，19(2)，1-17(2004))
17 Kim S W,Lee U J,Woo K D,Kim D K,Solidification microstructures and mechanical properties of vertical cen- trifugal cast high speed steel,Materials Science and Tech- nology,19(22),1727-1732(2003)
18 CUI Zhongqi,LIU Beixing,Metallurgy and Heat Treat- ment Principles(Harbin,Harbin Institute of Technology Press,1998) p.40-52 (崔忠圻，刘北兴，金属学与热处理原理(哈尔滨，哈尔滨工业大学出版社，1998)p．40-52)
19 Tumbull D,Formation of crystal nuclei in liquid metals, Journal of Applied Physics,21(10),1022-1028(1950)
20 Tiller W A,Jackson K A,Rutter J W,The redistribution of solute atoms during the solidification of metals,Acta Materialia,1,428-437(1951)+ |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
