1 GUO Ruisong, CUI Yiqiang, YANG Zhengfang, YUAN Qiming, CHEN Yuru, Improvement of property and study on Al2O3 composite ceramic sintering technology, Journal of Inorganic Materials, 13(2), 239(1998)
(郭瑞松, 崔一强, 杨正方, 袁启明, 陈玉如, 氧化铝复合陶瓷烧结工艺研究与力学性能改善, 无机材料学报, 13(2), 239(1998))
2 ZHANG Xihua, ZHANG Jianhua, LIU Changxia, Study state and development direction of Al2O3 matrix ceramic material toughened, Journal of Shandong University (Engineering Science), 34(5), 14(2004)
(张希华, 张建华, 刘长霞, 氧化铝基陶瓷材料增韧研究现状及其发展方向, 山东大学学报(工学版),   34(5),14(2004))
3 QI Jiazhong, CHEN Limin, Powder metallurgy technology, Powder Metallurgy Industry, 14(1), 25(2004)
(亓家钟, 陈利民, 粉末冶金新技术, 粉末冶金工业,  14(1), 25(2004))
4 TAN Ping, WANG Xiang, Sintering technology parameters and application of composite optimization program of powder metallurgy composite, Journal of Wuhan Iron, 18(2), 171(2006)
(谭萍, 王翔, 粉末冶金复合材料烧结工艺参数及组成的优化程序应用, 武汉钢铁学院学报,  18(2), 171(2006))
5 XIE Shuisheng, HUANG Shenghong, Semi-Solid Metal Forming and Its Application (Beijing, The Press of Metallurgy Industry, 1999) p.1
(谢水生, 黄声宏, 半固态金属加工技术及其应用 (北京, 冶金工业出版社, 1999) p.1)
6 LUO Shoujing, Semi-Solid Metal Forming (Harbin, The Press of Harbin Institute of Technology, 2003) p.11
(罗守靖,   半固态金属成形  (哈尔滨, 哈尔滨工业大学出版社, 2003) p.11)
7 TANG Jinglin, ZENG Daben, Development and application state of semi-solid process technology, Ordnance Material Science and Engineering, 21(3),56(2005)
(唐靖林, 曾大本, 半固态加工技术的发展和应用现状, 兵器材料科学与工程,  21(3), 56(2005))
8 DU Zhiming, CHENG Yuansheng, ZHAO Jiuzhou, Thixoforming of spray deposited AlZn12Cu2Mg2 wrough aluminum alloy in semi-solid state, Transactions of Nonferrous Metals Society of China, 15(Special 2), 152(2005)
9 LUO Shoujing, CHENG Yuansheng, DU Zhiming, Ceramics matrix composite thixoforging in pseudo-semisolid state, Transactions of Nonferrous Metals Society of China, 14(8), 1286(2004)
10 LUO Shoujing, CHENG Yuansheng, DU Zhiming, Thixoforging in pseudo-semi-solid state of ceramics matrix composite and its application in satellite angle-frames, Material Engineering, 10(1), 45(2005)
(罗守靖, 程远胜, 杜之明, 陶瓷基复合材料伪半固态触变成形及在卫星角框件中的应用, 材料工程,  10(1), 45(2005))
11 CHENG Yuansheng, DU Zhiming, LUO Shoujing, Rheological behavior of Al2O3n/Alm composites in pseudosemi- solid state, Transactions Transactions of Nonferrous Metals Society of China, 15(Special 2), 142(2005)
12 D.T.Rankin, J.J.Stiglich, D.R.Peter, Hot-pressing and mechanical properties of Al2O3 with an Co-dispersed phase, J. Am. Ceram. Soc., 54(6), 277(1971)
13 S.L.Sigl, P.A.Mataga, B.J.Dalgleish, On the toughness of brittle materials with a ductile phase, Acta Metall., 36(4), 945(1988)
14 MA Senlin, Ductile phase toughened brittle materials mater, Sci. Technol., 12(8), 124(1996)
15 A.Munitz, M.Metzger, R.Mehrabian, Toughening in composites of Al2O3 reinforced with Al, Acta Metall., 37(4), 3001(2005)