Please wait a minute...
Chinese Journal of Materials Research  2013, Vol. 27 Issue (1): 49-52    DOI:
Current Issue | Archive | Adv Search |
Preparation and Infrared Emissivity of Polyurethane/Composite Metal Pigments Coatings
ZHANG Weigang**, XU Guoyue, DUAN Kaige, DING Ruya, QIAO Jialiang
(College of Material Science & Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 211106)
Cite this article: 

ZHANG Weigang**,XU Guoyue,DUAN Kaige,DING Ruya,QIAO Jialiang. Preparation and Infrared Emissivity of Polyurethane/Composite Metal Pigments Coatings. Chinese Journal of Materials Research, 2013, 27(1): 49-52.

Download:  PDF(4615KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  ABSTRACT Polyurethane (PU)/AlBronze composite coatings were prepared by using flaky Al and bronze powders and PU as composite pigments and adhesives, respectively. The microstructure and infrared emissivity of the coatings were systematically investigated by scanning electron microscopy, infrared emissometer and theoretical simulation. The results show that PU/AlBronze composite coatings have similar one-dimensional photonic structural characteristics. The infrared emissivity of PU/AlBronze composite coatings with composite metal pigments is as low as 0.186 at the pigments content of 40%, and it is significantly lower than that of PU/Al and PU/Bronze composite coatings with single metal pigments. The reasons for this phenomenon are: (1) the reflection spectra of one-dimensional photonic structure in PU/AlBronze composite coatings have multiple reflection peaks; (2) comparing to PU/Bronze composite coatings with high density metal pigments, PU/AlBronze composite coatings have lower thickness of surface resin layer, reducing the emissivity increment of the coatings significantly.
Key words:  composites      composite metal pigments      coatings      infrared emissivity      one-dimensional photonic structure     
ZTFLH:  TB333  

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2013/V27/I1/49

1 M. Yuste, R. E. Galindo, O. Sanchez, D. Cano, Crrelation between structure and optical properties in low emissivity coatings for solar thermal collectors, Thin Solid Films, 518(20), 5720(2010)
2 B. P. Lin, H. J. Liu, S. X. Zhang, C. W. Yuan, Structure and infrared emissivity of silicon-containing Polyimide/BaTiO3 nanocomposite films, Journal of Solid State Chemistry, 177(10), 3849(2004)
3 J. Chen, Y. M. Zhou, Q. L. Zhou, Y. Q. Sun, X. Y. Ye, Z. Q. Wang, Synthesis, characterization and infrared emissivity study of Polyurethne/TiO2 nanocomposites, Applied surface science, 253(23), 9154(2007)
4 C. Hu, G. Y. Xu, X. M. Shen, Preparation and characteristics of thermal resistance polysiloxane/Al composite coatings with low infrared emissivity, Journal of Alloys and Compounds, 486(1-2), 371(2009)
5 REN Yue, HUA Ping, GONG Rongzhou, Materials with low infrared emissivity based on epoxy resin, Ordnance Material Science and Engneering, 34(2), 45(2011)
(任玥, 华萍, 龚荣州, 基于环氧树脂的低红外发射率材料研究, 兵器材料科学与工程, 34(2), 45(2011))
6 H. J. Yu, G. Y. Xu, X. M. Shen, Preparation of leafing Cu and its application in low infrared emissivity coatings, Journal of Alloys and Compounds, 484(1-2), 395(2009)
7 H. J. Yu, G. Y. Xu, X. M. Shen, Low infrared emissivity of polyurethane/Cu composite coatings, Applied Surface Science, 255(12), 6077(2009)
8 H. J. Yu, G. Y. Xu, X. M. Shen, Corrosion resistance and infrared emissivity properties of EPDM (EPDM-g-MAH) film on low infrared emissivity PU/Cu coating, Electrochimica Acta, 55(5), 1843(2010)
9 ZHANG Weigang, XU Guoyue, XU Fengfei, A practical simulation method for optimum pigment content of low infrared emissivity composite coatings, Infrared Technology, 33(12), 704(2011)
(张伟钢, 徐国跃, 徐飞凤, 低红外发射率复合涂层最佳颜料含量模拟方法, 红外技术, 33(12), 704(2011))
10 LIU Biliu, SHI Jiaming, ZHAO Dapeng, ZHANG Wei, A kind of infrared camouflage material based on photonic crystals, Infrared Technology, 30(9), 512(2008)
(刘必鎏, 时家明, 赵大鹏, 张 玮, 一种基于光子晶体的红外伪装材料, 红外技术, 30(9), 512(2008))
11 FEI Yiwei, HUANG Zhijie, TANG Weihong, LI Huaqiang, ZHU Fujin, Influence of pigment on radiance properties for thermal camouflage paint, Material Science and Engineering, 20(3), 449(2002)
(费逸伟, 黄之杰, 唐卫红, 李华强, 朱富进, 颜料对低发射率涂料红外辐射特性的影响, 材料科学与工程, 20(3), 449(2002))
12 DIN standard 55923, 1983
13 S. H. Hong, B. K. Kim, Fabrication of aluminum flake powder from foil scrap by a wet ball milling process, Materials Letters, 51(2), 139(2001)
14 L. C. David, S. Marin, J. D. Joannopoulos, Thermal emission and design in one-dimensional periodic metallic photonic crystal slabs, Phys. Rev. E, 74, 016609(2006)
15 J. J. Greffet, M. N. Vesperinas, Field theory for generalized bidirectional reflectivity: derivation of Helmholtz’s reciprocity principle and Kirchhoff’s law, J. Opt. Soc. Am. A, 15, 2735(1998)
[1] JI Yuchen, LIU Shuhe, ZHANG Tianyu, ZHA Cheng. Research Progress of MXene Used in Lithium Sulfur Battery[J]. 材料研究学报, 2023, 37(7): 481-494.
[2] ZHANG Tengxin, WANG Han, HAO Yabin, ZHANG Jiangang, SUN Xinyang, ZENG You. Damping Enhancement of Graphene/Polymer Composites Based on Interfacial Interactions of Hydrogen Bonds[J]. 材料研究学报, 2023, 37(6): 401-407.
[3] SHAO Mengmeng, CHEN Zhaoke, XIONG Xiang, ZENG Yi, WANG Duo, WANG Xuhui. Effect of Si2+ Ion Beam Irradiation on Performance of C/C-ZrC-SiC Composites[J]. 材料研究学报, 2023, 37(6): 472-480.
[4] MIAO Qi, ZUO Xiaoqing, ZHOU Yun, WANG Yingwu, GUO Lu, WANG Tan, HUANG Bei. Pore Structure, Mechanical and Sound Absorption Performance for Composite Foam of 304 Stainless Steel Fiber/ZL104 Aluminum Alloy[J]. 材料研究学报, 2023, 37(3): 175-183.
[5] LIN Shifeng, XU Dongan, ZHUANG Yanxin, ZHANG Haifeng, ZHU Zhengwang. Preparation and Mechanical Properties of TiZr-based Bulk Metallic Glass/TC21 Titanium Alloy Dual-layered Composites[J]. 材料研究学报, 2023, 37(3): 193-202.
[6] XIE Donghang, PAN Ran, ZHU Shize, WANG Dong, LIU Zhenyu, ZAN Yuning, XIAO Bolv, MA Zongyi. Effect of Reinforced Particle Size on the Microstructure and Tensile Properties of B4C/Al-Zn-Mg-Cu Composites[J]. 材料研究学报, 2023, 37(10): 731-738.
[7] WANG Yankun, WANG Yu, JI Wei, WANG Zhihui, PENG Xiangfei, HU Yuxiong, LIU Bin, XU Hong, BAI Peikang. Microstructure and Mechanical Properties of Carbon Fiber/Aluminum Laminated Composites[J]. 材料研究学报, 2022, 36(7): 536-544.
[8] ZONG Ping, LI Shiwei, CHEN Hong, MIAO Sainan, ZHANG Hui, LI Chao. In-situ Thermolysis Preparation of Carbon Capsulated Nano-copper and Its Stability[J]. 材料研究学报, 2022, 36(11): 829-836.
[9] ZONG Yixun, LI Shufeng, LIU Lei, ZHANG Xin, PAN Deng, WU Daihuiyu. Interface Regulation and Strengthening Mechanism of GNP-Ni/Cu Composites[J]. 材料研究学报, 2022, 36(10): 777-785.
[10] LI Rui, WANG Hao, ZHANG Tiangang, NIU Wei. Microstructure and Properties of Laser Clad Ti2Ni+TiC+Al2O3+CrxSy Composite Coating on Ti811 Alloy[J]. 材料研究学报, 2022, 36(1): 62-72.
[11] CHEN Yiwen, WANG Cheng, LOU Xia, LI Dingjun, ZHOU Ke, CHEN Minghui, WANG Qunchang, ZHU Shenglong, WANG Fuhui. Protective Performance of a Novel Inorganic Composite Coatings on CB2 Ferritic Heat Resistant Steel at 650℃ in Oxygen Flow with Water Vapor[J]. 材料研究学报, 2021, 35(9): 675-681.
[12] HOU Jing, YANG Peizhi, ZHENG Qinhong, YANG Wen, ZHOU Qihang, LI Xueming. Preparation and Performance of Graphite/TiO2 Composite Photocatalyst[J]. 材料研究学报, 2021, 35(9): 703-711.
[13] YANG Yana, CHEN Wenge, XUE Yuanlin. Interficial Bonding within Cu-based Composites Reinforced with TiC- or Ni-coated Carbon Fiber[J]. 材料研究学报, 2021, 35(6): 467-473.
[14] LI Wanxi, DU Yi'en, GUO Fang, CHEN Yongqiang. Preparation and Electromagnetic Properties of CoFe2O4-Co3Fe7 Nanoparticles and CoFe2O4/Porous Carbon[J]. 材料研究学报, 2021, 35(4): 302-312.
[15] HU Manying, OUYANG Delai, CUI Xia, DU Haiming, XU Yong. Properties of TiC Reinforced Ti-Composites Synthesized in Situ by Microwave Sintering[J]. 材料研究学报, 2021, 35(4): 277-283.
No Suggested Reading articles found!