|
|
|
| Manufacture and Actuating Characteristic of Ionic Polymer Metal Composites with Silver Electrodes |
| BIAN Kan1, XIONG Ke1, CHEN Qi2, LIU Gang1, WANG Bangfeng1 |
1.The Aero Science Key Lab for Smart Materials and Structures, Nanjing University of Aero and Astro, Nanjing 210016
2.Shanghai Aircraft Design and Research Institute, Shanghai 200436 |
|
Cite this article:
BIAN Kan XIONG Ke CHEN Qi LIU Gang WANG Bangfeng. Manufacture and Actuating Characteristic of Ionic Polymer Metal Composites with Silver Electrodes. Chin J Mater Res, 2010, 24(5): 520-524.
|
|
|
Abstract Ag-IPMC was fabricated by using chemical deposition methods in this paper. The topography and chemical composition of the surface electrodes of Ag-IPMC were analyzed by scanning electron microscopy (SEM) and energy dispersive spectrum (EDS). And the DC-Actuating ability, moisture characteristic of different states and the performance of tensile output were tested. The results show that Ag deposits well both inside and outside of the exchange membrane. Ag-IPMC exhibits large deflection and significant tensile force for the stimulation of low voltage (less than 1.6 V). The relationship between various performance and excitation voltage shows that the best DC-excitation voltage for Ag--IPMC is 0.6--1.2 V.
|
|
Received: 05 March 2010
|
|
|
| Fund: Supported by National Natural Science Foundation of China No.90605003. |
| 1 Mohsen Shahinpoor, Kwang J Kim, Ionic polymer-metal composites: III. Modeling and simulation as biomimetic sensors, actuator, transducers, and artificial muscles, Materials and Structures, 13, 1362(2004)
2 Mohsen Shahinpoor, Kwang J Kim, Novel ionic polymer-metal composites equipped with physically loaded particulate electrodes as biomimetic sensors, actuators and artificial muscles, Sensor and Actuators, 96(2), 125(2002)
3 Claudia Bonomo, Luigi Fortuna, Pietro Giannone, Salvatore Graziani, A method to characterize the deformation of an IPMC sensing membrane, Sensors and Actuators A, 123, 146(2005)
4 Min Yu, Hui Shen, Zhen-dong Dai, Manufacture and performance of ionic polymer-metal composites, Journal of Bionic Engineering, 4(3), 143(2007)
5 Mohsen Shahinpoor, Kwang J Kim, Ionic polymer-metal composites: I. fundamentals, Smart Materials and Structures, 10, 819(2001)
6 C.K.Chunga, P.K.Fung, Y.Z.Hong, M.S.Ju, C.C.K.Lin, T.C.Wu, A novel fabrication of ionic polymer-metal composites (IPMC) actuator with silver nano-powders,Sensors and Actuators, 117(2), 367(2006)
7 WANG Haixia, YU Haihu, LI Xiaofu, JIANG Desheng, Preparation and properties of Pt-Ni/Nafion menbrane based electrically driven materials, Journal of Wuhan University of Technology, 26(12), 5(2004)
(王海霞, 余海湖, 李小甫, 姜得生, Pt--Ni/Nafion膜电致动材料的制备及性能研究, 武汉理工大学学报, 26(12), 5(2004))
8 Hirohisa Tamagawa, Seizi Goto, Takayasu Sugiyama, Bending direction of Ag-plated IPMC containing immobile anions and/or cations, Composites Science and Technology, 68(15), 3412(2008)
9K.Sadeghipour, R.Salomon, S.Neogi, Development of a novel electrochemically active membrane and ‘smart’ material based vibration sensor/damper, Smart Materials and Structures, 1(2), 172(1992)
10Mohsen Shahipoor, Conceptual design, kinematics and dynamics of swimming robotic structures using ionic polymer gel muscles, Smart Materials and Structures, 1(1), 91(1992)
11K.Oguru, Y.Kawami, H.Takenaka, Bending of an ion-conducting polymer film-electrode composite artificial muscle by means of orthogonal array manufacturing method, Journal of Micromachine Society, 5, 27(1992)
12Sang Jun Lee, Man Jae Han, Seong Jun Kim, A new fabrication method for IPMC actuators and application to artificial finger, Smart Materials and Structures, 15(5), 1217(2006)
13Sia Nemat-Nasser, Micromechanics of actuation of ionic polymer-metal composites, Journal of Applied Physics, 92(5), 2899(2002)
14 Sia Nemat-Nasser, Yongxian Wu, Comparative experiments study of ionic polymer-metal composites with different backbone ionomers and in various cation forms, Journal of Applied Physics, 93(9), 5255(2003)
15A.Punning, M.Kruusmaa, A.Aabloo, Surface resistance experiments with IPMC sensors and actuators, Sensors and Actuators A, 133(1), 200(2007)
16Mohsen Shahinpoor, Kwang J Kim, The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles, Smart Materials and Structures, 9(4), 543(2000) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
