DEVELOPMENT OF SHORT CARBON FIBER-COPPER COMPOSITE

Chin J Mater Res

1990, Vol. 4

Issue (3): 223-227 DOI:

Current Issue | Archive | Adv Search

DEVELOPMENT OF SHORT CARBON FIBER-COPPER COMPOSITE

ZHANG Xiaojun;YING Meifang;WANG Chengfu(Hefei University of Technology)

Cite this article:

ZHANG Xiaojun;YING Meifang;WANG Chengfu(Hefei University of Technology). DEVELOPMENT OF SHORT CARBON FIBER-COPPER COMPOSITE. Chin J Mater Res, 1990, 4(3): 223-227.

Download:

PDF(1070KB)
Export: BibTeX | EndNote (RIS)

Abstract Short cabon fiber-copper composite were made by means of powder me-tallurgy.The fibers in composite were homgeneously distributed in the matrix and orientedrandomly.The tensile strength of the composite increases as the volume of fiber from 0 to2%,but dec

Key words: carbon fiber copper-carbon composite thermal conductivity electrical conductivity

Received: 25 June 1990

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1990/V4/I3/223

1 Berghezan.Advance in Composite Materials.Applied Science Publishers Ltd,1978:5
2 Hull D.An introduction to composite materials.Cambriag:Cambriage University Press,1981:46,89
3 Hikami F,Chou T W.Progress in Science and Engineering of Composites,1982;2:1091
4 Hasselman D P H,Johanson L F.Journal of Composite Materials,1987;21:509
5 Keiichi Kuniya,Hideo Arakawa,Tsuneyuki Kanai et al.Transactions of the Japan Institute of Metals,1987;28:819

[1]	QI Yunchao, FANG Guodong, ZHOU Zhengong, LIANG Jun. In-plane Tensile Strength for Needle-punched Composites Prepared by Different Needling Processes[J]. 材料研究学报, 2023, 37(1): 21-28.
[2]	ZHANG Peng, HUANG Dong, ZHANG Fuquan, YE Chong, WU Xiao, WU Huang. Effect of Graphitization Degree of Mesophase Pitch-based Carbon Fibers on Carbon Fiber/Al Interface Damage[J]. 材料研究学报, 2022, 36(8): 579-590.
[3]	WANG Yankun, WANG Yu, JI Wei, WANG Zhihui, PENG Xiangfei, HU Yuxiong, LIU Bin, XU Hong, BAI Peikang. Microstructure and Mechanical Properties of Carbon Fiber/Aluminum Laminated Composites[J]. 材料研究学报, 2022, 36(7): 536-544.
[4]	HUANG Huan, ZHANG Xuntao, YANG Shangke, XIAO Liuxin, ZHANG Zhaoxin, YAN Lei, LIN Hailan, BIAN Jun, CHEN Daiqiang. Properties of Nylon PA6-based Nanocomposites Co-modified with Graphene Oxide/sodium Benzoate Complex Nucleating Agent[J]. 材料研究学报, 2022, 36(6): 416-424.
[5]	ZHANG Baochao, TONG Yu, LI Wanhong. Preparation and Properties of Graphene Paper Garland and its Cement-based Composite[J]. 材料研究学报, 2021, 35(9): 689-693.
[6]	YANG Yana, CHEN Wenge, XUE Yuanlin. Interficial Bonding within Cu-based Composites Reinforced with TiC- or Ni-coated Carbon Fiber[J]. 材料研究学报, 2021, 35(6): 467-473.
[7]	LIU Zhufeng, HUANG Yaodong, YANG Xiao, HE Yuanjing, LI Zhaoqing, YAN Chunze. Preparation of Graphene/Ni-Cu Alloy Composite on Ni-Cu Alloy Template Made by Selective Laser Melting[J]. 材料研究学报, 2021, 35(1): 1-6.
[8]	CHEN Shaojie, XU Yanying, WANG Zhi, HU Po. Combustion Characteristics of Carbon Fiber/Epoxy Laminates at Low Heat Flux[J]. 材料研究学报, 2020, 34(12): 933-938.
[9]	Huan HUANG,Yuzhe CHEN,Yi GUO,Hailan LIN,Lijun WANG,Sude MA,Jun BIAN,Zhijie GU. Structure and Properties of PA6/GO Nanocomposite by In-situ Polymerization[J]. 材料研究学报, 2019, 33(8): 621-628.
[10]	Xiuli HU,Xiaxi YAO,Wenjun ZHANG,Wangjin JI,Jiacheng MU,Yuwen YONG,Xuhong WANG. Preparation of Porous Carbon Fibers with Different Carbon Sources and Their Adsorption Properties[J]. 材料研究学报, 2019, 33(5): 379-386.
[11]	WANG Haisheng,MIN Jie,WANG Yun,DENG Keyue. Effect of Minor-Cu Addition and Thermomechanical Treatment on Properties of Al-Fe Alloy[J]. 材料研究学报, 2019, 33(11): 874-880.
[12]	Yanxiang WANG, Shunsheng SU, Wenxin FAN, Jianjie QIN, Ce QU, Chengguo WANG. Metal Catalyst for Preparation of Multiscale Reinforcement of Carbon Nanotubes on Carbon Fibers[J]. 材料研究学报, 2018, 32(7): 495-501.
[13]	Wei YU, Yadong WANG, Renliang ZHANG, Ting LI, Huijian LI. Mechanical Properties of Carbon Fiber Reinforced Hollow Glass Microsphere/Epoxy Composite[J]. 材料研究学报, 2017, 31(4): 300-308.
[14]	Shuang LI,Xiaochun WU,Xinxin LI,Xijuan HE. High Temperature Performance of a Mo-W Type Hot Work Die Steel of High Thermal Conductivity[J]. 材料研究学报, 2017, 31(1): 32-40.
[15]	Yanying XU,Ying ZHANG,Zhi WANG,Jian CHEN. Study on Pyrolysis Kinetics of Typical Carbon Fiber Bidirectional Sheet[J]. 材料研究学报, 2017, 31(1): 57-64.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed