CONSTITUTE AND PROPERTY OFα-Ti AFTER HYDRIDING TREATMENT

Chin J Mater Res

1993, Vol. 7

Issue (6): 461-466 DOI:

Current Issue | Archive | Adv Search

CONSTITUTE AND PROPERTY OFα-Ti AFTER HYDRIDING TREATMENT

ZHANG Caibei;LAI Zuhan;JI Rong(State key Laboratory for Fatigue and Failure of Materials;Institute of Metal Research;Chinese Academy of Science)(Northeastern University)YU Yingda(Laberatory of Atcmic Imaging of Solds;Institute of Metal Research;Chinese Ac

Cite this article:

Download:

PDF(1675KB)
Export: BibTeX | EndNote (RIS)

Abstract Several types of hydrogenation/dehydrogenation processes have been studiedand applied to achieve the structural modification in commercial annealed α-Ti plate material.It is discovered that,at room temperature,there exist two kinds of hydride according to

Key words: hydriding treatment hydrogenation/dehydrogenation hydride grain property.

Received: 25 December 1993

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1993/V7/I6/461

1 Kerr W R.Metall Trans,1985;16A:1077
2 Froes F H,Eylon D,Saryanayana C.J Met,1990;42(3) :26
3 Kohn D H,Ducheyne P.J Mat Sci,1991;26(2) :328
4 Namakura H,Koiwa M.Acta Metall 1984;32(10) :1799

[1]	CHEN Jingjing, ZHAN Huimin, WU Hao, ZHU Qiaolin, ZHOU Dan, LI Ke. Tensile Mechanical Performance of High Entropy Nanocrystalline CoNiCrFeMn Alloy[J]. 材料研究学报, 2023, 37(8): 614-624.
[2]	WANG Hao, CUI Junjun, ZHAO Mingjiu. Recrystallization and Grain Growth Behavior for Strip and Foil of Ni-based Superalloy GH3536[J]. 材料研究学报, 2023, 37(7): 535-542.
[3]	JIANG Shuimiao, MING Kaisheng, ZHENG Shijian. A Review on Grain Boundary Segregation, Interfacial Phase and Mechanical Property Adjusting-controlling for Nanocrystalline Materials[J]. 材料研究学报, 2023, 37(5): 321-331.
[4]	YANG Baolei, LIU Tingguang, SU Xianglin, FAN Yu, QIU Liang, LU Yonghao. Effect of Thermal Aging on Mechanical Properties and Intergranular Corrosion Resistance of 316LN[J]. 材料研究学报, 2023, 37(5): 381-390.
[5]	NING Bo, LI Zhichao, WU Huibin, ZHANG Bingjun, HUANG Manli, DING Chao. Mechanism of Improving Low Temperature Impact Toughness of 09MnNi Vessel Steel[J]. 材料研究学报, 2022, 36(9): 660-666.
[6]	ZHANG Shouqing, HU Xiaofeng, DU Yubin, JIANG Haichang, PANG Huiyong, RONG Lijian. Effect of Quenching Cooling Rate on Mechanical Properties of a Ni-Cr-Mo-B Steel for Offshore Platform[J]. 材料研究学报, 2022, 36(4): 250-260.
[7]	YUAN Qiangqiang, WANG Zhigang, JIANG Yongfang, ZHANG Yinghui, HUANG Ankang, YE Jieyun. Effect of Warm-rolled Temperature on Microstructure and Texture in Cr-Ti-B Low Carbon Steel[J]. 材料研究学报, 2022, 36(2): 81-89.
[8]	LIU Yang, KANG Rui, FENG Xiaohui, LUO Tianjiao, LI Yingju, FENG Jianguang, CAO Tianhui, HUANG Qiuyan, YANG Yuansheng. Microstructure and Mechanical Properties of Extruded Mg-Alloy Mg-Al-Ca-Mn-Zn[J]. 材料研究学报, 2022, 36(1): 13-20.
[9]	WANG Beibei, LIU Yandong, XUE Peng, NI Dingrui, XIAO Bolv, MA Zongyi. Prepration and Mechanical Properties of Ultrafine-grained 6061 Al-alloy by Friction Stir Process[J]. 材料研究学报, 2021, 35(5): 321-329.
[10]	WANG Ping, GUO Aimin, HOU Qingyu, GUO Yunxia, HUANG Zhenyi, GUANG Jianfeng. Properties and Deformation Mechanism of Aged Fe-Mn-Al-C Steel[J]. 材料研究学报, 2021, 35(3): 184-192.
[11]	ZHOU Feng, CAO Yuxin, WAN Xiangliang. In-situ Observation of Effect of La on Grain Refinement in Simulated Coarse-grain Heat-affected Zone of High Strength Low Alloy Steel[J]. 材料研究学报, 2021, 35(3): 231-240.
[12]	ZHENG Hefeng, SHI Mengjie, MAO Qiang, ZHANG Mengchao, LI Hui. Chromium Concentration Near Grain Boundaries with Various Characters in Inconel Alloy 600[J]. 材料研究学报, 2020, 34(7): 511-517.
[13]	SUN Jingli,ZHOU Haitao,CHEN Li,WU Hong,LIU Weili,YAO Fei,XU Yuling. Grain Size Effect on Microstructure Evolution and Properties of 304 Austenitic Stainless Steel[J]. 材料研究学报, 2020, 34(3): 231-240.
[14]	MA Weijie,YANG Xirong,LUO Lei,LIU Xiaoyan,HAO Fengfeng. Dynamic Recrystallization Model of Ultrafine Grain Pure Titanium Prepared by Combined Deformation Process[J]. 材料研究学报, 2020, 34(3): 217-224.
[15]	FU Yongjun,LEI Jialiu,LIAO Qingling,ZHAO Dongnan,ZHANG Yucheng. Effect of Residual Carbon on Primary and Secondary Recrystallization of Grain-oriented Silicon Steel[J]. 材料研究学报, 2020, 34(2): 118-124.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed