|
|
Effects of Adding MoS2 and Graphite on Tribological Properties of Ni--Cr Based Self--lubricating Composites |
WANG Aifang1,2, ZHANG Dingjun1, WU Youzhi1, WANG Wenzhen2, JIA Junhong2 |
1.State Key Laboratory of Gansu Advanced Non--ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050
2.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 |
|
Cite this article:
WANG Aifang ZHANG Dingjun WU Youzhi WANG Wenzhen JIA Junhong. Effects of Adding MoS2 and Graphite on Tribological Properties of Ni--Cr Based Self--lubricating Composites. Chin J Mater Res, 2010, 24(5): 464-470.
|
Abstract The influences of MoS2 and graphite on the tribological properties of Ni--Cr based self--lubricating composites prepared by powder metallurgy were investigated. The results show that the micro--hardness of composites decreases obviously with the increase of content of MoS2. While the friction coefficient and wear rate of the composites don’t change evidently with increasing the content of MoS2 from 10% to 15% (mass fraction). The micro--hardness of composites reduces gradually with the rise of graphite amount, the friction coefficient of composites increases slightly at 400℃and 800℃. When the content of graphite is 10%, the friction coefficient of composite is lowest at room temperature. Addition of 5% MoS2 and 10% graphite, the friction coefficient of composites keeps 0.48--0.65 meaning the synergic lubricating effect between graphite and MoS2, and the wear rate is an order of magnitude higher than that of composites containing MoS2 alone or graphite alone.
|
Received: 11 June 2010
|
|
Fund: Supported by National Natural Science Foundation of China No.50972148 and Hundreds Talents Program of Chinese Academy of Sciences No.KGCX2--YW--804. |
1 XUE Maoquan, XIONG Dangsheng, YAN Jie, Tribological study on solid lubricating materials at high temperatures, Ordnance Material Science and Engineering, 26 (6), 59(2003)
(薛茂权,熊党生,闫 杰,高温固体润滑材料的研究现状,兵器材料科学与工程,26 (6), 59(2003))
2 LIU Rutie, LI Xibing, SU Chunming,CHENG Shihe,LI Yingmei, Nickel-base high-temperature self-lubricating material, Hunan nonferrous metals, 14(5), 25-29(1998)
((刘如铁,李溪滨,苏春明,程时和,李英美,镍基高温自润滑材料[J],湖南有色金属14(5), 25(1998))
3 J. L. Li, D. S. Xiong, M. F. Huo, Friction and wear properties of Ni–Cr–W–Al–Ti–MoS2 at elevated temperatures and self-consumption phenomena, Wear, 265,566(2008)
4 DING Chunhua, WANG Yaping, ZHOU Jinghu, A NiCr-based high temperature self-lubricating coating PM304 prepared by powder metallurgy , Acta metallurgica sinica, 42 (11), 1216(2006)
(丁春华,王亚平,周敬虎,粉末冶金制备NiCr基高温自润滑合金PM304涂层,金属学报,42 (11), 1216(2006))
5 J. L. Li, D. S. Xiong, Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection, Wear, 265, 533(2008)
6 C.H. Ding, P.L. Li, G. Ran, J.N. Zhou,PM304 coating on a Ni-based superalloy rod for high temperature lubrication, Ceramics International, 34, 279(2008)
7 J. L. Li, D. S. Xiong, Tribological behavior of graphite-containing nickel-based composite as function of temperature, load and counterface, Wear, 266, 360(2009)
8 S.T. Aruna, V.K. William Grips, K.S. Rajam, Ni-based electrodeposited composite coating exhibiting improved microhardness, corrosion and wear resistance properties, Journal of Alloys and Compounds, 468, 546(2009)
9 JIANG Bingyu, LIU Shimin, WANG Richu, LUO Fenghua, Effect of BN on mechanical and tribological properties of BN/Ni(Cr) self-lubricating composites, Materials Science and Engineering of Powder Metallurgy,14(1),57(2009)
(蒋冰玉,刘世民,王日初,罗丰华,BN含量对BN/Ni(Cr)自润滑材料力学及摩损性能的影响,粉末冶金材料科学与工程, 14(1),57-62(2009))
10 LI Yufeng, OUYANG Jiahu, ZHOU Yu, Research and development status of high temperature solid lubricant materials, Heat treatment technology and equipment, 28 (6) , 2(2007)
(李玉峰,欧阳家虎,周 玉,高温固体润滑材料研究的发展现状,热处理技术与装备,28 (6) , 2(2007))
11 C. Donnet, A. Erdemir, Solid lubricant coatings: recent developments and future trends, Tribology Letters, 17(3), 389(2004)
12 ZHAN G Xianglin, QIAO Xiaoyong, ZHAN G Xiaofeng, WANG Aihua, Development of High Temperature Solid Self-Lubricant Coatings, New Technology & New Process,11,7(2006)
(张祥林,乔晓勇,章小峰等,高温固体自润滑涂层的发展,新技术新工艺,11,7(2006))
13 ZHANG Shichao, QIU Xueliang, MA Changwen, The Oxidation Behavior of the Nature Graphite, Journal of Materials engineering, 8, 31(1997)
(张世超,邱学良,马昌文,天然石墨的氧化研究,材料工程,8, 31(1997))
14 PAN Jiaoliang, WANG Yinzhen, LI Fangpo, GAO Haijun, Effects of Ni-coated graphite on tribological properties of Ni-based coating, Hot Working Technology, 36 (19), 57(2007)
(潘蛟亮,王引真,李方坡,高海军,镍包石墨对镍基涂层摩擦学性能的影响,热处理工艺,57(2007))
|
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|