|
|
|
| Abradability Evaluation of NiCrW–BN Gas Path Seal Coating |
| LIU Suwei, GAO Siyang, LI Shu, LIU Yang, WANG Peng |
| Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 |
|
Cite this article:
LIU Suwei GAO Siyang LI Shu LIU Yang WANG Peng. Abradability Evaluation of NiCrW–BN Gas Path Seal Coating. Chin J Mater Res, 2010, 24(4): 406-410.
|
|
|
Abstract The abradability of two NiCrW–BN seal coatings processed by different heat treatments were observed by pin–disk, single–pass scratching, and high–speed wear tests. The results show that seal coating abradability is different from its wear– resistance, i.e. measuring of wear loss, wear–resistance, specific energy consumption and hardness, can not be used as abradability criterion. Coating abradability evaluation should be composed of extensive information, such as coating and blade wear loss, friction coefficient, wear topography. Seal coating abradability is obviously influenced by test condition, while high–speed rubbing test can simulate working variables of seal coating, such as rub linear speed, incursion velocity, probably reproduce its wear phenomena. Therefore the adoption of high–speed test to evaluate seal coating abradability is more reasonable.
|
|
Received: 09 April 2010
|
|
|
| Fund: Supported by National Natural Foundation of China No.50675215. |
| [1] J. T. DeMasi-marcin, D. K. Gupta, Protective coatings in the gas turbine engine, Surface & Coatings Technology, 68-69(1-3), 1 (1994)
[2] LIU Suwei, LI Shu, LIU Yang, Seal coating and evaluation of its abradability, China Surface Engineering, 22(1), 12(2009)
(刘夙伟, 李曙, 刘阳, 封严涂层材料及其可刮削性的评价, 中国表面工程, 22(1), 12(2009)
[3] A. F. Emery, J. Wolak, S. Etemad, S. R. Choi, An experimental investigationof temperatures due to rubbing at the blade–seal interface in an aircraft compressor, Wear, 91(2) , 117(1983)
[4] M. O. Borel, A. R. Nicoll, H. W. Sch?pfer, R. K. Schmid, The wear mechanisms occurring in abradable seals of gas turbines, Surface & Coatings Technology, 39-40(1-3), 117(1989)
[5] D. E. Chappel, L. Vo, H. W. Howe, in: The International Gas Turbine & Aeroengine Congress & Exhibition, Gas path blade tip seals: abradable seal material testing at utility gas and steam turbine operating conditions(New Orleans, USA, ASME, 2001)p.1
[6] K. Hajmrle, P. Fiala, A. P. Chilkowich, L. T. Shiembob, in: ASME Turbo Expo.(vol. 4), Abradable seals for gas turbines and other rotary equipment(Vienna, Australia, ASME, 2004) p.673
[7] F. E. Kennedy, N. P. Hine, Single-pass rub testing of abradable seal materials, Journal of the ASLE, 38(9): 557(1982)
[8] Y. N. Liang, S. Z. Li, S. Li, Evaluation of abradability of porous seal materials in a single pendulum scratch device, Wear, , 177(2), 167(1994)
[9] R. C. Bill, L. P. Ludwig, Wear of seal materials used in aircraft propulsion system, Wear, , 59(1), 165(1980
[10] W. F. Laverty, Rub energetics of compressor blade tip seals, Wear, 75(1), 1 (1982)
[11] E. Novinski, J. Harrington, J. Klein, Modified zirconia abradable seal coating for high temperature gas turbine applications, Thin Solid Films, 95, 255(1982)
[12] YI Maozhong, ZHANG Xianlong, HU Naisai, HE Jiawen, Abradability evaluation of seal coating by impact-scraping test machine, Acta Aeronautica et Astronautica Sinica, 20(3), 249(1999)
(易茂中, 张先龙, 胡奈赛, 何家文, 冲击刮削法评价封严涂层的可磨耗性, 航空学报, 20(3), 249(1999))
[13] M. Z. Yi, J. W. He, B. Y. Huang, H. J. Zhou. Friction and wear behavior and abradability of abradable seal coating, Wear, 231(1), 47(1999)
[14] G. Barbezat, R. Clarke, A. R. Nicoll, in: Proceedings of the international symposium on tribology(Vol.2), The importance of tribology in the development and application of abradable plasma sprayed coatings for aircraft engines, edited by Y. S. Jin(Beijing, China, International Academic Publishers, 1993)p.756
|
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
