1 LIU Longfei, DAI Lanhong, LING Zhong, YANG Guowei, Microstructure effects of SiCp particle-reinforced 6351Al matrix composites, Chinese Journal of Materials Research, 16(3), 238(2002)
(刘龙飞, 戴兰宏, 凌中, 杨国伟, SiCp/6351Al复合材料的微结构效应, 材料研究学报,  16(3), 238(2002))
2 MA Suyuan, CHEN Rui, HE Xiaochun, LI Jiabao, HAO Xuezhuo, Shot peening induced strengthening of the surface layer of martensite stainless steel 0Cr13Ni4Mo, Acta Metallurgica Sinica, 41(1), 28(2005)
(马素媛, 陈瑞, 贺笑春, 李家宝, 郝学卓, 0Cr13Ni4Mo马氏体不锈钢表层的喷丸强化, 金属学报,  41(1), 28(2005))
3 GAI Xiuying, LI Jiabao, KANG Zengqiao, WANG Zhongguang, Mechanical properties of shot peened surface for steel 60Mn, Acta Metallurgica Sinica, 32(6), 605(1996)
(盖秀颖, 李家宝, 康增桥, 王中光, 60Mn钢喷丸表面的力学性能, 金属学报,  32(6), 605(1996))
4 LUAN Weizhi, JIANG Chuanhai, JI Vicent, CHEN Yanhua, WANG Haowei, Investigation for warm peening of TIB2/Al composite using X-ray diffraction, Materials Science and Engineering A, 497, 374(2008)
5 T.Ung´ar, A.Borbely, The effect of dislocation contrast on X-ray line broadening: A new approach to line profile analysis, Applied Physics Letters, 69(21), 3173(1996)
6 T.Ung´ar, S.Ott, P.G.Sanders, A.Borbely, J.R.Weertman, Dislocatins, grain size and planar faults in nanostructured copper determined by high resolution X-ray diffraction and a new procedure of peak profile analysis, Acta Materialia, 46(10), 3693(1998)
7 LI Jiabao, Determination of superficial stress-strain relationship with X-ray diffraction technique, Chinese Journal of Materials Research, 12(3), 287(1998)
(李家宝, 利用X射线衍射方法确定金属工艺表面, 材料研究学报,  12(3), 287(1998))
8 J.B.Li, F.Z.Liu, V.Ji, Influence of shot peening on superficial yield strength of spring steel in hard state, Surface Engineering, 14(6), 469(1998)
9 LI Jiabao, QIN Ming, LIU Fengzhi, SONG Xiaoping, GAI Xiuying, Characterization and investigation of softening decarburized layer of spring steel 60Si2Mn, Acta Metallurgica Sinica, 36(3), 287(2000)
(李家宝, 覃明, 刘凤智, 宋小平, 盖秀颖, 弹簧钢60Si2Mn脱碳层软化的表征与研究, 金属学报,  36(3), 287(2000))
10 M.Qin, V.Ji, Y.N.Wu, C.R.Chen, J.B.Li, Determination of proof stress and strain-hardening exponent for thin film with biaxial residual stresses by in-situ XRD stress analysis, Surface and Coatings Technology, 192, 139(2005)
11 GUO Rui, WANG Ronghua, Influence of shot peening strengthening on structure and properties of 25MoCr5 steel carburized gears, Transactions of Metal Heat Treatment, 6, 21(2001)
(郭锐, 王荣华, 喷丸强化对25MoCr5钢渗碳齿轮组织及性能的影响, 金属热处理,  6, 21(2001))
12 B.Scholtes, E.Macherauch, Effects of Mechanical surface treatment of the strength properties of metallic materials, Z. Metallkd, 77, 322(1986)
13 JIANG Chuanhai, WANG Dezhun, YAO Zhongkai, Factor of actual bearing stress of matrix in SiCw/Al composites under loading stress, Acta Materiae Compositae Sinica, 17(3), 42(2000)
(姜传海, 王德尊, 姚忠凯, 加载情况下SiCw/Al复合材料中基体的实际承载系数, 复合材料学报,  17(3), 42(2000))
14 A R.Stokes, A numerical Fourier-analysis method for the correction of widths and shapes of lines on X-ray powder photographs, Proceeding of the Physical Society, 61, 382(1948)
15 T.Ung´ar, Dislocation densities, arrangements and character from X-ray diffraction experiments, Materials Science and Engineering A, 309-310, 14(2001)
16 T.Ung´ar, Microstructural parameters from X-ray diffraction peak broadening, Scripta Materialia, 51, 777(2004)
17 T.Ung´ar, I.Dragomir, A.Revesz, A.Borbely, The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice, Journal of Applied Crystallography, 32, 992(1999)
18 M.Wilkens, The determination of density and distribution of dislocations in deformed single crystals from broadened X-ray diffraction profiles, Physics Status Solidi (A), 2, 359(1970)
19 F.J.Humphreys, P.N.Kalu, Dislocation-particle interactions during high temperature deformation of two-phase aluminum alloys, Acta Metallurgica et Materialia, 35, 2815(1987)