1999, Vol. 13

Issue (3): 225-229 DOI:

Research Articles

Current Issue | Archive | Adv Search

Cite this article:

. . Chin J Mater Res, 1999, 13(3): 225-229.

Download:

PDF(539KB)
Export: BibTeX | EndNote (RIS)

Key words:

Received: 01 January 1900

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1999/V13/I3/225

1 H.Mughrabi, in Proc.7th int.conf.on Strength of Metals and alloys,Vol.3(Pergamon Press,Oxford,1985) p.1917
2C.Laird;P.Charsley,H.Mughrabi,Mater.Sci.Eng.,81,433(1986)
3Z.S. Baslnski,S.J.Basinski,Prog.Mater.Sci,36,89(1992)
4H.Mughrabi, Mater.Sci.Eng, 33, 207(1978)
5Y.D.Chung, H.Margolin、 Metall.Trans, 4; 1905(1973)
6金能韫,金属学报,24,A299(1988)
7金能韫,金属学报,24,A311(1988)
8T.K.Lepisto,P.O.Kettunen,Mater.Sci.Eng,83,1(1986)
9B.Gong, Z.R.Wang, Z.G.Wang, Acta Mater; 45, 1365(1997)
10Z.R.Wang; BGong。 ZGWang, Acta Mater, 45 1379(1997)
11X.W.Li, ZGWang, GYLi; S.DWu, S.X.Li, Acta MetalL, 46, 4497(1998)
12王中光,李广义,自然科学进展, 6, 526(1996)
13BGong, Z.GWang, YWZhang, MatersciEng.、 A194, 171(1995)
14B.Gong; ZR.Wang, ZGWangl YWZhang, Matersci.Eng A210, 94(1996)
15张轶伟,双滑移取向钢单晶的循环形变行为,硕士论文,中国科学院金属研究所(1995)
16李小武,王中光,李守新,金属学报,34,864(1998)
17X.W.Li, ZG.Wang, S.X.Li, Mater.Sci.Eng., A26O, 132(1999)
18李小武,王中光,李守新,自然科学进展(1999,待发表)
19A.S、Cheng, C.Laird, Mater.SciEng., 51; 111(1981)
20A.T.Winter, Phil.Mag, 29, 719(1974)
21X.W.Li; Z.G.Wangj S.X.Li, Mater.Sci.Eng.(1999, in press)1

[1]	Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2]	. [J]. 材料研究学报, 2006, 20(4): 348-353.
[3]	. [J]. 材料研究学报, 2006, 20(2): 191-196.
[4]	. [J]. 材料研究学报, 2006, 20(3): 322-326.
[5]	. [J]. 材料研究学报, 2002, 16(4): 425-428.
[6]	Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7]	. [J]. 材料研究学报, 2005, 19(6): 651-656.
[8]	SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9]	ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10]	. [J]. 材料研究学报, 2003, 17(4): 433-438.
[11]	LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12]	HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13]	CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14]	Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15]	. [J]. 材料研究学报, 2001, 15(3): 303-307.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed