Chin J Mater Res  1998, Vol. 12 Issue (3): 282-286    DOI:

Current Issue | Archive | Adv Search |

THE TENSILE STRENGTH AND FRACTURE MODE OF δ-ALUMINA SHORT FIBRE REINFORCED ALUMINIUM ALLOYS

ZHANG Jini;YANG Chuan; LIU Shikai; ZHANG Xiyan; KANG Guozheng (Materials Department; Southwest Jiaotong University; Chengdu 610031)

ZHANG Jini;YANG Chuan; LIU Shikai; ZHANG Xiyan; KANG Guozheng (Materials Department; Southwest Jiaotong University; Chengdu 610031). THE TENSILE STRENGTH AND FRACTURE MODE OF δ-ALUMINA SHORT FIBRE REINFORCED ALUMINIUM ALLOYS. Chin J Mater Res, 1998, 12(3): 282-286.

Abstract References Related Articles Recommended Metrics Download:  PDF(1873KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The metal matrix composites based on a series of aluminium alloys and " Saffil" short fibre preforms were manufactured with the squeeze casting technique. The volume fraction of fibres in preforms was in the range from 8% to 20%. optical microscopy analys Key words:  metal matrix composites      fracture mode      prediction of UTS      Received:  25 June 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1998/V12/I3/282 1H.Fukuda, T.W.Chou;J、 Mater Sci, 17, 1003(1982) 2Data paper from　I.C.I.Co.(1994) 3刘世楷,杨川,张吉喜,第九届全国复合材料学术会议论文集(下册),张志民,毛化民,毛天祥,杨乃宾编(北京,世界图书出版公司,1996)P.291 4T.Lim, Y.H.Kim, C.S.Lee, K.S.Ham,J.Compos.Mater, 26(7), 1062(1992) 5Krishan K Chawla. Composite Materials Science and Engineerign,(Beijing,World publishing corporation,1989) p.201 6张吉喜,杨 川,刘世楷,复合材料学报,14(1),33(1997)) [1] TAN Xi, SONG Yuzhe, SHI Xin, QIANG Jin, WEI Tingxuan, LU Qihai. Magnetization Reversal Field and Magneto-Resistor of Spin Valve[J]. 材料研究学报, 2020, 34(4): 272-276. [2] Yinsheng HU,Huan YU,Zhifeng XU,Changchun CAI,Mingming NIE. Effect of Fiber Preheating Temperature on Mechanical Properties of Continuous Al2O3f/Al Composites[J]. 材料研究学报, 2019, 33(5): 361-370. [3] Rongzhen GAO, Xiaodong LI, Wenfeng LIU, Yanhong YIN, Shuting YANG. Synthesis and Li-storage Performance of Hierarchical Spheroid Composites of MgFe2O4/C[J]. 材料研究学报, 2018, 32(9): 713-720. [4] Caihong YING, Lijia CHEN, Tianlong LIU, Lianquan GUO. Cyclic Creep Behavior of 11.5CrNbTi and 15Cr0.5MoNbTi Ultra Pure Ferritic Stainless Steels[J]. 材料研究学报, 2017, 31(7): 481-488. [5] ZHANG Yuebo ZONG Yaping CAO Xinjian ZHANG Long. Effects of Chemical Ni Plating of Reinforcing Particles on Properties of SiCp/Fe Composite[J]. 材料研究学报, 2012, 26(5): 483-488. [6] . Solidification microstructure of 3D--meshy SiC/Cu metal matrix composites[J]. 材料研究学报, 2004, 18(6): 597-605. [7] ZHANG Guoding;CHEN Yu;LIU Cheng(Shanghai Jiaolong University). THE HETEROGENEITY OF MECHANICAL PROPERTIES IN THE MICROZONE OF METAL MATRIX COMPOSITES[J]. 材料研究学报, 1997, 11(1): 21-24. [8] WANG Haowei; WU Renjie; ZHANG Guoding(Shanghai Jiao Tong University). INFLUENCE OF THE ORIGINAL STATE OF FIBERS ON THE MICRO-MORPHOLOGY OF METAL MATRIX COMPOSITE[J]. 材料研究学报, 1996, 10(1): 105-108. [9] TU Yuqiang; WANG Zhangmin; LI Geyang ;LI Pengxing (Shanghai Jiao Tong University)(Correspondent: LI Geyang; Associate Professor; State Key Lab of Metal Mains Composites Shanghai JiaoTong University; Shanghai 200030). INVESTIGATION OF INTERFACIAL REACTION OF Al / SiC COMPOSITES BY DTA METHOD[J]. 材料研究学报, 1994, 8(6): 570-572. [10] QUAN Gaofeng; CHAI Donglang; WANG Xiulin; SONG Yujiu (Xi'an Jiaotong University)TU Mingjing (Chengdu University of Science and Technology). MICROMECHANICAL ANALYSIS AND EXPERIMENTAL OBSERVATIONS ON CRACK INITIATION IN METAL MATRIX COMPOSITES[J]. 材料研究学报, 1994, 8(5): 460-466. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed