Chin J Mater Res  1998, Vol. 12 Issue (1): 42-46    DOI:

Current Issue | Archive | Adv Search |

RECRYSTALLIZATION TEXTURE IN COPPER HEATED BY LASER BEAM AND DISCUSSION ON ITS MECHANISM

WU Baolin;WANG Yandong;ZUO Liang;LIANG Zhide (Dep.of Mater.Sci. and Eng; Northeastern University; Shenyang 110006 Shenyang Institute of Aeronautical Engineering)

WU Baolin;WANG Yandong;ZUO Liang;LIANG Zhide (Dep.of Mater.Sci. and Eng; Northeastern University; Shenyang 110006 Shenyang Institute of Aeronautical Engineering). RECRYSTALLIZATION TEXTURE IN COPPER HEATED BY LASER BEAM AND DISCUSSION ON ITS MECHANISM. Chin J Mater Res, 1998, 12(1): 42-46.

Abstract References Related Articles Recommended Metrics Download:  PDF(1133KB)  Export:  BibTeX | EndNote (RIS)       Abstract  Recrystallization textures of cold deformed metals are greatly affected by heating rate. In this paper, the laser heating technique was applied to the ultra-rapidly annealing of coldrolled pure copper. The results showed that the texture development kine Key words:  laser beam heating      recrystallization      Cube texture. oriented nucleation      oriented Growth      Received:  25 February 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1998/V12/I1/42 1 J.L.Lebron,G.Maeder,P.Parniere,in Proceedings of 6th International Conference on Textures of Mate-rials, edited by S. Nagashima(Tokyo, ISIJ, 1981) p.787 2 I.V. Alexandrov, G.J. Davies, Mater. Sci. Eng. 78, L1(1985) 3 刘燕声,王福,徐家桢,梁志德.东北大学学报,15(3),294(1994) 4 L.G. Schulz,J. Appl. Phys. 20, 1030(1949) 5 Z.D.Liang,I.Xu,F.Wang,in Proceedings of 6th International Conference on Textures of Materials,editedby S. Nasashim a(Tokyo, ISIJ, 1981) p.1259 6 H.E.Vatne,E.Nes,Scripta Metall.Mater.30(3),309(1994) 7 C.T. Necker, R.D. Doherty,A.D. Rollett, in Proceedings of the 10th Interntional Conference on Textures ofMaterials,edited by H.J.Bunge(Switzerland,Trans Tech Publ.Ltd,1990)p.1021H [1] ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667. [2] XU Lijun, ZHENG Ce, FENG Xiaohui, HUANG Qiuyan, LI Yingju, YANG Yuansheng. Effects of Directional Recrystallization on Microstructure and Superelastic Property of Hot-rolled Cu71Al18Mn11 Alloy[J]. 材料研究学报, 2023, 37(8): 571-580. [3] WANG Hao, CUI Junjun, ZHAO Mingjiu. Recrystallization and Grain Growth Behavior for Strip and Foil of Ni-based Superalloy GH3536[J]. 材料研究学报, 2023, 37(7): 535-542. [4] YU Sen, CHEN Leli, LUO Rui, YUAN Zhizhong, WANG Shuang, GAO Pei, CHENG Xiaonong. Dynamic Recrystallization and Microstructure Evolution Mechanism of GH4169 Alloy[J]. 材料研究学报, 2023, 37(3): 211-218. [5] YU Chao, XING Guangchao, WU Zhengmin, DONG Bo, DING Jun, DI Jinghui, ZHU Hongxi, DENG Chengji. Effect of Submicron Al2O3 Addition on Sintering Process of Recrystallized Silicon Carbide[J]. 材料研究学报, 2022, 36(9): 679-686. [6] LUO Hanyu, CAO Jianchun, ZENG Min, HAO Tianci, GAO Peng, WANG Juncai, ZHANG Fanling. Effect of Zr on Deformed Austenite Recrystallization and Precipitates in Ti-Microalloyed Low Carbon Steel[J]. 材料研究学报, 2022, 36(2): 123-132. [7] CUI Zhiqiang, ZHANG Ningfei, WANG Jie, HOU Qingyu, HUANG Zhenyi. High Temperature Compression Deformation Behavior of 9Mn27Al10Ni3Si Low Density Steel[J]. 材料研究学报, 2022, 36(12): 907-918. [8] LIU Yang, KANG Rui, FENG Xiaohui, LUO Tianjiao, LI Yingju, FENG Jianguang, CAO Tianhui, HUANG Qiuyan, YANG Yuansheng. Microstructure and Mechanical Properties of Extruded Mg-Alloy Mg-Al-Ca-Mn-Zn[J]. 材料研究学报, 2022, 36(1): 13-20. [9] LIU Chao, WANG Xin, MEN Yue, ZHANG Haoyu, ZHANG Siqian, ZHOU Ge, CHEN Lijia, LIU Haijian. Dynamic Recrystallization of Ti-6Al-4V Alloy During Hot Compression[J]. 材料研究学报, 2021, 35(8): 583-590. [10] PAN Xiaoyu, YANG Yinhui, NI Ke, CAO Jianchun, QIAN Hao. Microstructure and Recrystallization Behavior of 18.5%Cr High-Mn Low-Ni Type Duplex Stainless Steel during Hot Compression with Large Deformation[J]. 材料研究学报, 2021, 35(5): 381-393. [11] SUN He, CHEN Ming, CHENG Ming, WANG Ruixue, WANG Xu, HU Xiaodong, ZHAO Hongyang, JU Dongying. A Multi-scale Model for Elucidation of Recrystallization and Texture of Mg-Alloy Sheet by Warm-rolling Process[J]. 材料研究学报, 2021, 35(5): 339-348. [12] YANG Jingcheng, WANG Lizhong, ZHONG Zhiping, ZHENG Yingjun. Flow Stress Prediction Model of 37CrS4 Special Steel Based on Dynamic Recrystallization[J]. 材料研究学报, 2021, 35(4): 284-292. [13] YANG Gaoyuan, XIANG Wenhao, LIU Dezheng, QU Junhao, LIANG Ying, LI Wangnan, XU Ke, ZHONG Jie, HUANG Fuzhi, CHEN Meihua, LIANG Guijie. Control of Morphology of SnO2 Nanorod Array by Hydrothermal Reaction Process[J]. 材料研究学报, 2021, 35(4): 293-301. [14] CHENG Xiaonong, GUI Xiang, LUO Rui, XU Guifang, YUAN Zhizhong, ZHOU Yuseng, GAO Pei. Dynamic Recrystallization Behavior and Kinetics Model of a New Developed Austenitic Heat Resistant Steel CHDG-A[J]. 材料研究学报, 2020, 34(8): 611-620. [15] LI Zhaoming,JIANG Haichang,YAN Desheng,ZHANG Hongliang,RONG Lijian,WU Fei. Effect of Minor Sc on Microstructure and Properties of Al-Zn-Mg Alloy Weld Joint[J]. 材料研究学报, 2019, 33(9): 673-682. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed