材料研究学报  2002, Vol. 16 Issue (1): 26-30

论文 本期目录 | 过刊浏览 |

预处理对碳钢大气腐蚀的影响

万晔; 史志明; 严川伟; 曹楚南

中国科学院金属研究所腐蚀与防护国家重点实验室

万晔; 史志明; 严川伟; 曹楚南 . 预处理对碳钢大气腐蚀的影响[J]. 材料研究学报, 2002, 16(1): 26-30.

摘要 参考文献 相关文章 Metrics 全文: PDF(421 KB)   摘要: 通过检测具有不同初期腐蚀产物的A3钢、16Mn钢和20#钢挂片在大气腐蚀曝晒站进行曝晒后的增重，研究表面初期污染与初始腐蚀状态对后期腐蚀动力学的影响. 结果表明，在预腐蚀过程中不同污染预处理的碳钢增重速率有少量差别，在曝晒的初期，不同预腐蚀处理对加速腐蚀的作用明显不同，曝晒一定时间后，腐蚀速度与规律趋于一致，三种碳钢的腐蚀随时间的发展均有减缓的趋势，预腐蚀处理对三种碳钢的后期腐蚀性能影响很小. Mn对碳钢的腐蚀有一定的减缓作用，而C加速碳钢的腐蚀． 关键词 ： 大气腐蚀,  腐蚀增重,  污染物     Key words： 收稿日期: 1900-01-01      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 万晔 史志明 严川伟 曹楚南 44.8K 链接本文: https://www.cjmr.org/CN/Y2002/V16/I1/26 1 K.Komvopoulos,Surface engineering and microtribology for microelectromechanical systems,Wear,200,305(1996) 2 B.Bhushan,J.N.Israelachvili,U.Landman,Nanotribology: friction,wear and lubrication at the atomic scale,Nature, 374,607(1995) 3 LI Xin,TANG Zhenan,XU Jun,Preparation and char- acterization of DLC films for microelectromechanical sys- tems(MEMS)applications,Chinese Journal of Materials Research,18(6),582(2004) (李新，唐祯安，徐军，用于微机电系统的类金刚石膜制备及表征，材料研究学报，18(6)，582(2004)) 4 M.Libor,D.Oksana,Organic-inorganic hybrid networks, Macromolecular Symposia,171,181(2001) 5 O.Tomoki,C.Yoshiki,Organic-inorganic polymer hybrids prepared by the sol-gel method,Composite Interfaces, 11(8-9),539(2005) 6 J.D.Mackenzie,E.P.Bescher,Structures,properties and potential applications of ormosils,Journal of Sol-Gel Sci- ence and Technology,13,371(1998) 7 P.B.Eric,N.Atif,D.M.John,Fluorinated copolymer-oxide hybrids,Journal of Sol-Gel Science and Technology,32, 69(2004) 8 F.Paola,M.Massimo,M.Monica,P.Francesco,T.Rosa, T.Claudia,T.Maurizio,Surface properties of fluorinated hybrid coatings,Journal of Applied Polymer Science,102, 1483(2006) 9 ZHANG Chengmao,WU Hongli,ZHANG Zhijun,DANG Hongxin,LIU Weimin,Preparation and characterization of TiO_2/PVP nanocomposite thin films,Chemical Re- search,14(1),1(2003) (张晟卯，吴红丽，张治军，党鸿辛，刘维民，二氧化钛/聚乙烯吡咯烷酮纳米复合薄膜的制备与表征，化学研究，14(1)，1(2003)) 10 G.T.Gu,Z.J.Zhang,H.X.Dang,Preparation and char- acterization of hydrophobic organic-inorganic composite thin films of PMMA/SiO_2/TiO_2 with low friction coeffi- cient,Applied Surface Science,221,129(2004) 11 G.T.Gu,Z.J.Zhang,H.X.Dang,Hydrophobic inorganic- organic thin films with a low coefficient of friction,Ma- terials Research Bulletin,39(7-8),1037(2004) 12 C.H.Li,K.Jordens,G.L.Wilkes,Abrasion-resistant coat- ings for plastic and soft metallic substrates by sol-gel reactions of a triethoxysilylated diethylenetriamineand tetramethoxysilane,Wear,242,152(2000) 13 B.M.Novak,Hybrid nanocomposite materials-between in- organic glasses and organic polymers,Advanced Materials, 5(6),422(1993) 14 K.Gigant,U.Posset,G.Schottner,L.Baia,W.Kiefer, J.Popp,Inorganic-organic cross-linking in UVcurable hard coats based upon vinyltriethoxysilane-tetraethoxysilane- polyfunctional acrylate hybrid polymer and colon;A Ra- man spectroscopic study,Journal of Sol-Gel Science and Technology,26(1-3),369(2003) 15 Y.Wei,W.Wang,J.M.Yeh,B.Wang,D.Yang,J.K.Murray, Photochemical synthesis of polyacrylate-silica hybrid sol- gel materials catalyzed by photoacids,Advanced Materi- als,6(5),372(1994) 16 T.Gunji,Y.Kawaquchi,H.Okonoqi,T.Sakan,K.Arimitsu, Y.Abe,Preparation and properties of organic-inorganic hybrid gel films based on polyvinylpolysilsesquioxane syn- thesized from trimethoxy(vinyl)silane,Journal of Sol-Gel Science and Technology,33(1),9(2005) 17 J.E.Mark,Ceramic-reinforced polymers and polymer- modified ceramics,Polymer Engineering and Science, 36(24),2905(1996) 18 JIAN Xigao,CHEN Ping,LIAO Gongxiong,ZHU Xiuling, ZHANG Shouhai,WANG Jinyan,Syntheses and proper- ties of novel high performance series poly(aromatic ethers) polymers containing phthalazinone moieties,Acta Poly- mer Sinica,(4),469(2003) (蹇锡高，陈平，廖功雄，朱秀玲，张守海，王锦艳，含二氮杂荼酮结构新型聚芳醚系列高性能聚合物的合成与性能，高分子学报，(4)，469(2003) 19 O.Noiset,C.Henneuse,Y.J.Schneider,Marchand- Brynaert,Surface reduction of poly(aryl ether ether ketone)film:UV spectrophotometric,3H radiochemical, and X-ray photoelectron spectroscopic assays of the hydroxyl functions,Macromolecules,30(3),540(1997) 20 N.L.Franchina,T.J.McCrathy,Surface modifications of poly(ether ether ketone),Macromolecules,24(11), 3045(1991) 21 O.Noiset,Y.J.Schneider,M.B.Jacqueline,Surface modifi- cation of poly(aryl ether ether ketone)(PEEK)film by covalent coupling of amines and amino acids through a spacer arm,Journal of Polymer Science:Part A:Polymer Chemistry,35,3779(1997) 22 C.L.Chiang,M.Ma Chen-Chi,Synthesis,characterization, thermal properties and flame retardance of novel pheno- lic resin/silica nanocomposites,Polymer Degradation and Stability,83,207(2004) 23 WEN Shizhu,HUANG Pingqing,Tribology Principle (Beijing,Tsinghua University Press,2002)p.319-320 (温诗铸，黄平清，摩擦学原理，第二版，(北京，清华大学出版社，2002)p．319-320) [1] 尹奇,刘淼然,刘雨薇,潘晨,王振尧. MgCl2对锌在干湿交替环境中腐蚀行为的影响[J]. 材料研究学报, 2019, 33(9): 705-712. [2] 张丹,王振尧. 在盐湖地区暴露48个月纯锌的腐蚀行为[J]. 材料研究学报, 2019, 33(8): 603-613. [3] 王劲, 黄青丹, 刘静, 张亚茹, 乔创, 郝龙, 董俊华, 柯伟. 镀锌钢在模拟广州地区大气环境中的室内加速腐蚀研究[J]. 材料研究学报, 2018, 32(8): 631-640. [4] 张大磊, 妙圆圆, 荆赫, 豆肖辉, 金有海. 亚硫酸盐对热镀锌钢材在海洋大气环境中氢吸收行为的影响[J]. 材料研究学报, 2018, 32(7): 533-540. [5] 张丹, 王振尧, 周永璋, 刘雨薇, 尹奇, 曹公望. 镀锌钢在青海盐湖大气环境下的初期腐蚀行为研究[J]. 材料研究学报, 2018, 32(4): 255-262. [6] 王沙沙,杨浪,黄运华,肖葵,李晓刚. 硼硫酸阳极氧化6061铝合金在不同大气环境中的初期腐蚀行为研究[J]. 材料研究学报, 2017, 31(1): 49-56. [7] 续冉,王燕华,王佳,刘在健,张源. 海水液滴铺展因子对碳钢表面电化学特性的影响[J]. 材料研究学报, 2015, 29(2): 95-100. [8] 贾瑞灵 翟熙伟 严川伟 王福会. 原位阻抗谱研究$\beta$相对镁--铝合金初期大气腐蚀行为的作用[J]. 材料研究学报, 2010, 24(3): 245-253. [9] 张大磊 李焰. 热镀锌钢材在海洋大气环境中的氢渗透行为[J]. 材料研究学报, 2009, 23(6): 592-597. [10] 黄春晓;吴维(山文);孙成;高耕宇;骆继勋;刘寿荣. A3钢的工业大气腐蚀[J]. 材料研究学报, 1992, 6(4): 308-311. [11] 孙成;吴维(山文);黄春晓;高耕宇;骆继勋;刘寿荣. Zn的乡村大气腐蚀[J]. 材料研究学报, 1992, 6(4): 312-314. Viewed Full text Abstract Cited   Shared      Discussed