Please wait a minute...
Chinese Journal of Materials Research  2013, Vol. 27 Issue (1): 85-90    DOI:
Current Issue | Archive | Adv Search |
Preparation and Tribological Performance of Complex of β-Cyclodextrin and Oleic Acid
GUAN Jiju1 XU Xuefeng1** HE Rongjun2 HUANG Yishen1 PENG Wei1
1. Key Laboratory of Special Purpose Equipment and Advanced Processing Technology (Zhejiang University of Technology), Ministry of Education Zhejiang Province, Hangzhou 310014
2. College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310014
Cite this article: 

GUAN Jiju XU Xuefeng** HE Rongjun HUANG Yishen PENG Wei. Preparation and Tribological Performance of Complex of β-Cyclodextrin and Oleic Acid. Chinese Journal of Materials Research, 2013, 27(1): 85-90.

Download:  PDF(6544KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  ABSTRACT The complex of β-cyclodextrin (β-CD) and oleic acid was prepared as a kind of lubricant additive. The effects of testing load, friction time and additive content on tribological performance were investigated using four ball testing methods, and the lubrication mechanism of the complex was analyzed. The results showed that the friction coefficient of lubricant of complex continuously reduced with the increasing of time under the load of 196 N, 294 N and 392 N. The anti-wear property of complex was better than that of β-CD and oleic acid for different additive content. When the content was 0.9%, lubricant of complex had the best friction-reducing ability. The host β-CD molecules of complex were decomposed and guest oleic acid molecules were released during friction process. The carboxylic acid soap film formed by oleic acid played a major role in lubrication, and the alcohol chemisorption film and carbon deposition film formed by the fragments of β-CD played auxiliary and promoting role. They formed a composite lubricating film, which had better tribological performance under certain conditions.
ZTFLH:  TH117  

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2013/V27/I1/85

1 TONG Linhui, Cyclodextrin Chemistry Fundaments and Application (Beijing, Science Press, 2001) p.330
(童林荟, 环糊精化学-基础与应用 (北京, 科学出版社, 2001) p.330)
2 Disco Corporation, Electrodeposited grinding wheel and manufacturing method, CN Patent, 200610004514. X, 2006-8-16
(株式会社迪思科, 电沉积砂轮及其制造方法, 中国专利, 200610004514.X, 2006-8-16)
3 TENG Lin, SHI Xingkuan, REN Jingxin, On improving cooling and lubrication of grinding process, Journal of Northwestern Polytechnical University, 15(1), 7(1997)
(滕 霖, 史兴宽, 任敬心, 增效浸渗砂轮的增效机理及其效果, 西北工业大学学报, 15(1), 7(1997))
4 SONG Lexin, ZHOU Taoyu, GUO Zijian, Progress on supramolecular structure of inclusion compounds of cyclodextrins and their derivatives, Chinese Journal of Inorganic Chemistry, 17(1), 9(2001)
(宋乐新, 周桃玉, 郭子建, 环糊精及其衍生物的超分子晶体结构研究进展, 无机化学学报, 17(1), 9(2001))
5 F. P. Bowden, D. Tabor, The Friction and Lubrication of Solids, 1st, (Oxford, Clarendon Press, 1986) p.202
6 S. Jahanmir, Chain length effects in boundary lubrication, Wear, 102(4), 331(1985)
7 WANG Jiugen, ZHANG Jianzhong, On formation and breakup of boundary lubricating layer, Lubrication Engineering, 172(6), 5(2005)
(汪久根, 张建忠, 边界润滑膜的形成与破裂分析, 润滑与密封, 172(6), 5(2005))
8 G. Heinicke, Tribochemistry, 1st (Berlin, Akademie-Verlag, 1984) p.18
9 C. Kajdas, Importance of the triboemission process for tribochemical reaction, Tribol. Int., 38(3), 337(2005)
10 M. Majzner, C. Kajdas, Reactions of carboxylic acids under boundary friction conditions, Tribologia, 34(1), 63(2003)
11 D. A. Fischer, Z. S. Hu, S. M. Hsu, Tribochemical and thermochemical reactions of stearic acid on copper surfaces in air as measured by ultrasoft X-ray absorption spectroscopy, Tribol. Lett., 3(1), 35(1997)
12 D. Briggs, Surface Analysis of Polymers by XPS and Static SIMS, 1st (London, Cambridge University Press, 1998) p.64
13 C. Kajdas, About an ionic-radical concept of the lubrication mechanism of alcohols, Wear, 116(6), 167(1987)
14 ZHANG Ruijun, LI Shenghua, JIN Yuansheng, FT-IR and Raman spectroscopic evaluation of products derived from pyrolyzed lubricant during friction and wear, J. Tsinghua. Univ. (Sci. & Tech.), 43(5), 648(2003)
(张瑞军, 李生华, 金元生, 润滑油摩擦碳化物的FT-IR及Raman评价, 清华大学学报(自然科学版), 43(5), 648(2003))
15 WANG Rulin, Tribochemistry of Lubricant (Beijing, China Petrochemical Press, 1994) p.16
(王汝霖, 润滑剂摩擦化学 (北京, 中国石化出版社, 1994) p.16)
16 HUANG Ping, MENG Yonggang, XU Hua, Tribology Course (Beijing, Higher Education Press, 2007) p.406
(黄 平, 孟永刚, 徐 华, 摩擦学教程 (北京, 高等教育出版社, 2007) p.406)
[1] WANG Wei, PENG Yiqing, DING Shijie, CHANG Wenjuan, GAO Yuan, WANG Kuaishe. Tribological Properties of Graphite-based Solid Lubricating Coatings for Ti-6Al-4V Alloy at 500~800oC[J]. 材料研究学报, 2023, 37(6): 432-442.
[2] CHEN Jingjing, QIU Xiaolin, LI Ke, YUAN Junjun, ZHOU Dan, LIU Yiwei. Microstructure Evolution and Plastic Removal for Single Crystal Nickel Induced by Particle Scratching: Atomic Simulation Method[J]. 材料研究学报, 2022, 36(7): 511-518.
[3] WANG Zhensheng, XIE Wei, PENG Zhen, HE Yingqian, ZENG Yanggen. Environment-induced Brittle Wear Mechanism of K417G Alloy[J]. 材料研究学报, 2021, 35(7): 501-509.
[4] XIE Mingling, ZHANG Guang'an, SHI Xing, TAN Xi, GAO Xiaoping, SONG Yuzhe. Anti-oxidization and Electronic Properties of Ti Doped MoS2 Films[J]. 材料研究学报, 2021, 35(1): 59-64.
[5] SHI Yuanji, CHEN Xianbing, WU Xiujuan, WANG Hongjun, GUO Xunzhong, LI Junwan. Deformation Mechanism of Nanoscale Polycrystalline α-Silicon Carbide Based on Molecular Dynamics Simulation[J]. 材料研究学报, 2020, 34(8): 628-634.
[6] YIN Cunhong, LI Shaobo, LIANG Yilong. Energy Analysis and Corresponding Model of Friction Strain-induced Solid State Amorphization of Lath Martensite[J]. 材料研究学报, 2020, 34(4): 254-262.
[7] ZHOU Yin,WANG Shuqi,ZHAO Zhenjiang,XU Sheng,WANG Jian. Stability of MLG/Fe2O3 Nano-particulate Tribo-layer on TC11 Ti-alloy[J]. 材料研究学报, 2019, 33(10): 763-770.
[8] Tuo ZHANG,Lvdan TENG,Qiyu ZANG,Yitao YANG. Friction and Wear Behavior of Niobium Alloyed Medium Chromium Wear-resistant Cast Steel[J]. 材料研究学报, 2019, 33(4): 313-320.
[9] Yu TONG,Wanhong LI,Jia DONG,Xuejun SONG,Han WANG,You ZENG. Suspension Dispersibility and Tribological Properties of Graphene-modified Lubricant Oil[J]. 材料研究学报, 2019, 33(1): 59-64.
[10] Xiaoren LV, Jichi CHEN, Heting QIAO, Shijie WANG. Effect of Shape of Sand Grains on Wear of Nitrile Butadiene Rubber in Crude Oil with Sand and their Mechanical Behavior[J]. 材料研究学报, 2018, 32(1): 65-72.
[11] LI Cui, SUN Tao, SHI Guojun, YUAN Yue, ZHANG Chenkai. Polytetrafluoroethylene Composites Filled with Mullite and their Tribological Performance[J]. 材料研究学报, 2016, 30(6): 427-437.
[12] ZHAO Haochuan, REN Yibin, LIU Wenpeng, FAN Xinmin, YANG Ke. Effect of Cold Deformation on Friction Wear Property of 00Cr18Mn15Mo2N0.9 High-nitrogen Nickel-free Stainless Steel[J]. 材料研究学报, 2016, 30(3): 171-178.
[13] PU Shengjun, YANG Haopeng, WANG Hongbin, WU Xiaochun. Effect of Rare Earth Ce on High Temperature Friction and Wear Property of Pack Boronized H13 Steel[J]. 材料研究学报, 2015, 29(7): 481-488.
[14] LIU Yue ZHANG Guoshang** WEI Shizhong LI Jiwen XU Liujie REN Yanyan. Effect of Titanium on Microstructure and Wear Resistance of High-chromium Hardfacing Alloys[J]. 材料研究学报, 2013, 27(6): 641-646.
[15] JIN Qifeng,** XUE Lei CHEN Xin LI Haoying. Preparation and Tribological Behavior of Trimethoxysilane Functionaiized Poly (phthalazinone ether ketone) Self-Assembled Thin Films[J]. 材料研究学报, 2013, 27(4): 419-424.
No Suggested Reading articles found!