2006, Vol. 20

Issue (4): 403-406 DOI:

Research Articles

Current Issue | Archive | Adv Search

Cite this article:

. . Chin J Mater Res, 2006, 20(4): 403-406.

Download:

PDF(619KB)
Export: BibTeX | EndNote (RIS)

Key words:

Received: 01 January 1900

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2006/V20/I4/403

1 B.L.Mordike, T.Ebert, Materials Science and Engineering, A302, 37(2001)
2 LIU Zheng, WANG Yue, WANG Zhongguang, Chinese Journal of Materials Research, 14(5), 449(2000) (刘正,王越,王中光,材料研究学报,14(5),449(2000))
3 Rajan Ambat, Zhou W., Surface and Coating Technology, 179, 124(2004)
4 H.W.Huo, Y.Li, F.H.Wang, Corrosion Science, 46, 1467(2004)
5 W.A.Fairweather, Trans. IMF, 75(3), 113(1997)
6 L.Brown, Finishing, 18(11), 22(1994)
7 A.K.Sharma, M.R.Suresh, H.Bhojraj, Metal Finishing, 3, 10(1998)
8 HUO Hongwei, LI Ying, WANG Fuhui, Journal of Chinese Society for Corrosion and Protection, 1(22), 13(2002) (霍宏伟,李瑛,王福会,中国腐蚀与防护学报,1(22), 13(2002))
9 LIU Xinguan, XIANG Yanghui, HU Wenbin, The Chinese Journal of Nonferrous Metals, 4(13), 1046(2003) (刘新宽,向阳辉,胡文彬,中国有色金属学报,4(13), 1046(2003))
10 Gavin W. Reade, Charles Kerr, B.Des Barker, Frank C. Walsh, Trans. IMF, 76(4), 149(1998)
11 C.Kerr, D.Barker, F.C.Walsh, Trans. IMF, 74(6), 214 (1996)
12 Hong Deng, Per Moller, Trans. IMF, 71(4), 142(1993)
13. Wuhan University, Experiment of Analytical Chemistry (Beijing, Higher Education Press, 1999) p.58, 59, 75 (武汉大学,分析化学实验(北京,高等教育出版社,1999)p．58, 59,75)
14 JIANG Xiaoxia, SHEN Wei, The Fundamentals and Practice of Electroless Plating (Beijing, National Defense Industry Press, 2000) p.26 (姜晓霞,沈伟,化学镀理论及实践(北京,国防工业出版社, 2000)p．26)O

[1]	Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2]	. [J]. 材料研究学报, 2006, 20(4): 348-353.
[3]	. [J]. 材料研究学报, 2006, 20(2): 191-196.
[4]	. [J]. 材料研究学报, 2006, 20(3): 322-326.
[5]	. [J]. 材料研究学报, 2002, 16(4): 425-428.
[6]	Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7]	. [J]. 材料研究学报, 2005, 19(6): 651-656.
[8]	SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9]	ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10]	. [J]. 材料研究学报, 2003, 17(4): 433-438.
[11]	LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12]	HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13]	CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14]	Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15]	. [J]. 材料研究学报, 2001, 15(3): 303-307.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed