2006, Vol. 20

Issue (2): 153-155 DOI:

Research Articles

Current Issue | Archive | Adv Search

Cite this article:

. . Chin J Mater Res, 2006, 20(2): 153-155.

Download:

PDF(526KB)
Export: BibTeX | EndNote (RIS)

Key words:

Received: 01 January 1900

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2006/V20/I2/153

1 Yu.L.Khait,J.Salzman,R.Beserman,Appl.Phys.Lett.,53(22),28(1988)
2 T.Egawa,H.Ishikawa,M.Umeno,Appl.Phys.Lett.,69(6),5(1996)
3 G.Meneghesso,S.Levada,E.Zanoni,S.Podda,G.Mura,M.Vanzi,A.Cavallini,A.Castaldini,S.Du,I.Eliashevich,Phys.Stat.Sol.,(a) 194(2),389(2002)
4 N.Narendran,Y.Gu,J.P.Freyssinier,H.Yu,L.Deng,Journal of Crystal Growth,268,449(2004)
5 T.Deguchi,T.A.Azuhata,T.Sota,S.Chichibu,S.Nakamura,Mater.Sci.and Eng.B 50,251(1997)
6 Kow-Ming Chang,Jiunn-Yi Chu,Chao-Chen Cheng,IEEE PHOTONICS TECHNOLOGY LETTERS,16(8),1807(2004)
7 X.A.Cao,E.B.Stokes,P.M.Stodvik member,IEEE,S.F.LeBoeuf,J.Kretchmer,D.Walker,IEEE Elector Device Letter,23(9),535(2002)
8 SHI Min,Semconductor Dvices Physics and Technology,Translated by ZHAO Heming,QIAN Min and HUANG Qiuping (Suzhou,The press of Suzhou University,2002) p.109 (施敏，半导体器件物理与工艺(美)赵鹤鸣，钱敏，黄秋萍译(苏州，苏州大学出版社，2002)p．109)
9 A.R.Riben,D.L.Feucht,Solid-State Electron,9,1055(1966)
10 S.R.Forrest,M.Didomernico Jr.,R.G.Smith,H.J.Stocker,Appl.Phys.Lett.,36,580(1980)d

[1]	Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2]	. [J]. 材料研究学报, 2006, 20(4): 348-353.
[3]	. [J]. 材料研究学报, 2006, 20(2): 191-196.
[4]	. [J]. 材料研究学报, 2006, 20(3): 322-326.
[5]	. [J]. 材料研究学报, 2002, 16(4): 425-428.
[6]	Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7]	. [J]. 材料研究学报, 2005, 19(6): 651-656.
[8]	SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9]	ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10]	. [J]. 材料研究学报, 2003, 17(4): 433-438.
[11]	LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12]	HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13]	CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14]	Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15]	. [J]. 材料研究学报, 2001, 15(3): 303-307.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed