1999, Vol. 13

Issue (3): 301-304 DOI:

Research Articles

Current Issue | Archive | Adv Search

Cite this article:

. . Chin J Mater Res, 1999, 13(3): 301-304.

Download:

PDF(829KB)
Export: BibTeX | EndNote (RIS)

Key words:

Received: 01 January 1900

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1999/V13/I3/301

1Dislich, Angecoandt Chemie; 10, 363(1971)
2L.L.Hench,J.K.west, Chem. Rev, 90, 33(1990)
3S.Wallace, L.L.Hench, Mater.Res.Soc.Symp.Proc., 10, 47(1984)
4A.Julbee, C.Baizer,J.M.Barthez, C.Guizard, A.Larbot, L.Cot,J.of Set. & Tech.; 4, 89(1995)
SA.Monnier,F.Schuth,Q.Huo,D.Kumar,D.Margolese,R.S.Maxwell,G.D.Stucky,M.Krlshnamurty, P.Petroff, A.Firouzi, M.Janicke, B.F.Chmelka, Science, 261, 1299(1993)
6严东生,基础教育, 5,9(1997)
7徐如人,中国科学基金,2,79(1997)
8齐利名,马季铭,化学通报,5,1(1997)
9J.H.Sun, W.H.Fan; DWu, Y.H.Sun, Stud.Surfsci.Catal, 118, 617(1998)
10汤加苗,朱从善,范文浩,吴东,孙子罕,材料研究学报,12(1),79(1998)
11孙子罕,吴东,孙继红,范文浩,徐耀,中国专利,98106594.X(1998)
12王莉玮,赵敬哲,王子忱,张丽华,中国颗粒学会首届年会论文集(北京,清华大学,1997)p.137
13D.Ravalne,A.Seminel,Y.Charouillot,M.Vincens,J.Non—Cryst.solids,82,210(1986)
14M,S.W.Vong, N.Bazin, P.A.Sermon,J.Sol-GeL Set. & Tech, 8, 499(1997)
15C.J.Brinker,G.w.Scherer,Sol-Gel Science-The Physics and Chemistry of S-G Processing(Academic Press, INC,1990)p.102
16周祖康,顾惕人,马季铭,胶体化学基础(北京,北京大学出版社,1987),P.265
17王相田,胡黎明,顾达,胡英,化学通报, 5,13(1995)
18沈钟,王果庭,胶体与表面化学(北京,化学工业出版社,1991)p.31

[1]	Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2]	. [J]. 材料研究学报, 2006, 20(4): 348-353.
[3]	. [J]. 材料研究学报, 2006, 20(2): 191-196.
[4]	. [J]. 材料研究学报, 2006, 20(3): 322-326.
[5]	. [J]. 材料研究学报, 2002, 16(4): 425-428.
[6]	Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7]	. [J]. 材料研究学报, 2005, 19(6): 651-656.
[8]	SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9]	ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10]	. [J]. 材料研究学报, 2003, 17(4): 433-438.
[11]	LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12]	HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13]	CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14]	Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15]	. [J]. 材料研究学报, 2001, 15(3): 303-307.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed