THE SUPERCONDUCTIVITY OF OXIDE Bi-Sr-Ca-Cu-O

Chin J Mater Res

1989, Vol. 3

Issue (2): 143-146 DOI:

Current Issue | Archive | Adv Search

THE SUPERCONDUCTIVITY OF OXIDE Bi-Sr-Ca-Cu-O

WANG Yongzhong ZHU Naiping HAO Huiqing YAN Xueqin XING Zhongshu QIAO Guiwen (Institute of Metal Research;Academia Sinica)

Cite this article:

WANG Yongzhong ZHU Naiping HAO Huiqing YAN Xueqin XING Zhongshu QIAO Guiwen (Institute of Metal Research;Academia Sinica). THE SUPERCONDUCTIVITY OF OXIDE Bi-Sr-Ca-Cu-O. Chin J Mater Res, 1989, 3(2): 143-146.

Download:

PDF(260KB)
Export: BibTeX | EndNote (RIS)

Abstract The samples of Bi-Sr-Ca-Cu-O superconductors was preparedby sintering and casting techniques have been studied.Two super conductivephases have been observed in a casting sample,which was casted at 1100℃and heat treated at 850℃ after solidification.The mag

Key words: superconducting material Bi-Sr-Ca-Cu-O system casting

Received: 25 April 1989

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1989/V3/I2/143

1 Michel C,Hervieu M,Borel M M,et al.Zeit Phys,Submitted
2 Maeja H,Tanaka Y,Fukutomi M,et al.Jpn J Appl Phys,1988;2:27
3 Chu C W,Bechtold J,Gao L,et al.Phys Rev Lett,Submitted
4 Hazen R M,Veblen D R,Hor P H et al.Super Conductivity in the Very High Tc,Bi-Ca-Sr-Cu-O System:Phase Identification
5 Zhu N P,Zhou L J,Li T F et al.Modern Physics Letters,1988(to be published)c

[1]	MIAO Qi, ZUO Xiaoqing, ZHOU Yun, WANG Yingwu, GUO Lu, WANG Tan, HUANG Bei. Pore Structure, Mechanical and Sound Absorption Performance for Composite Foam of 304 Stainless Steel Fiber/ZL104 Aluminum Alloy[J]. 材料研究学报, 2023, 37(3): 175-183.
[2]	JIANG Jufu, WANG Ying, XIAO Guanfei, DENG Teng, LIU Yingze, ZHANG Ying. Influence of Modification, Refinement and Heat Treatment on Mechanical Properties of A356 Al-alloy Components Prepared by Squeeze Casting[J]. 材料研究学报, 2020, 34(12): 881-891.
[3]	CHEN Xianming, PAN Qinglin, FAN Yingying. Precipitation of Al₃(Sc_x,Ti_1-_x) Particles in Al-Mg-Sc-Ti Alloy[J]. 材料研究学报, 2020, 34(10): 737-743.
[4]	Lintao CHEN Wenge HOU,Yingbin LIU,Qiwen LUO. Analyses on Connection Characteristics of Composites of Steel-Copper[J]. 材料研究学报, 2015, 29(9): 693-700.
[5]	Zhigang YANG,Jianbo YU,Chuanjun LI,Kang DENG,Zhongming REN,Yunbo ZHONG,Qiuliang WANG,Yinming DAI,Hui WANG. Effect of Sintering Conditions on Texture Formation of Si₃N₄ Ceramic Shaped up in a Strong Magnetic Field[J]. 材料研究学报, 2015, 29(5): 371-376.
[6]	Jian ZHAO,Chunlei YI. Optimization of Investment Casting Process for Stainless Steel Impeller with Complicated Geometry[J]. 材料研究学报, 2015, 29(12): 955-960.
[7]	DONG Zhihua ,CHEN Dengfu ,LONG Mujun ZHANG Xing ,SHEN Jialong. High Temperature Mechanical Properties for the Columnar Zone of Steel 20CrMnTi[J]. 材料研究学报, 2013, 27(3): 273-278.
[8]	HUANG Zhiquan,HUANG Qingxue, MA Lifeng,LIN Jinbao, PANG Zhining. Study on Microstructure and Properties of the Broadloom AZ31B Magnesium Alloy Roll-casting Plate[J]. 材料研究学报, 2013, 27(3): 292-298.
[9]	SUI Yanwei; Li Bangsheng; Liu Aihui; Xiong Yancai; Guo Jingjie; FU Hengzhi. Gas bubble nucleation in centrifugal casting liquid metal filling and flow process[J]. 材料研究学报, 2008, 22(6): 580-584.
[10]	. Solidification microstructure of 3D--meshy SiC/Cu metal matrix composites[J]. 材料研究学报, 2004, 18(6): 597-605.
[11]	HE Deping; WEN Desun; ZHANG Yong; SHU Guangji (Southeast University). THE INFILTRATION PROCESS OF MOLTEN AI INTO POROUS MEDIA[J]. 材料研究学报, 1997, 11(2): 113-119.
[12]	WEN Xiyu; WANG Yulin; ZHENG Yangzeng (Yanshan University)HE Chongzhi (Central Iron and Steel Resarch Insttute)(Correspondent:Department of Materials Engineering;Yanshan University;Qinhuangdao 066004). ODF ANALYSIS OF 3004 ALUMINIUM ALLOY CANMAKING SHEET IN THE MIDDLE PROCESSING STATE FROM CONTINUOUS CASTING AND HOT ROLLING[J]. 材料研究学报, 1996, 10(4): 378-382.
[13]	JIN Junze; ZHANG Xingguo; CAO Zhiqiang ;ZHU Xiaoying (Dalian University of Technology)(Correspondent:Director Professor;The Engineering Research Center of Foundry;Dalian University of Tech nology;Dalian 116023). STUDY ON TECHNOLOGICAL PARAMETERS OF EMC PROCESSING IN Al ALLOYS[J]. 材料研究学报, 1996, 10(4): 397-400.
[14]	ZHANG Yong;SHU Guangji;HE Deping(Southeast University). THE PRODUCTION OF FOAM ALUMINIUM ALLOY BY LOW-PRESSURE INFILTRATION METHOD[J]. 材料研究学报, 1993, 7(6): 473-478.
[15]	WANG Dezun LIU Zongrong YAO Zhongkai YAO Mei (Harbin Institute of Technology). STUDY ON REACTION SYNTHESIS COMPOSITE Al_2O_3/Ti_xAl_y BY SINTERING TiO_2/Al BULK[J]. 材料研究学报, 1993, 7(5): 457-460.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed