CYCLIC HARDENING AND WORK HARDENING IN HIGH MANGANESE STEEL AT LOW TEMPERATURE

Chin J Mater Res

1991, Vol. 5

Issue (1): 44-47 DOI:

Current Issue | Archive | Adv Search

CYCLIC HARDENING AND WORK HARDENING IN HIGH MANGANESE STEEL AT LOW TEMPERATURE

SONG Xiaolong YAN Wenbin TU Mingjing (Xi'an Jiaotong University)

Cite this article:

SONG Xiaolong YAN Wenbin TU Mingjing (Xi'an Jiaotong University). CYCLIC HARDENING AND WORK HARDENING IN HIGH MANGANESE STEEL AT LOW TEMPERATURE. Chin J Mater Res, 1991, 5(1): 44-47.

Download:

PDF(949KB)
Export: BibTeX | EndNote (RIS)

Abstract The low cycle fatigue test of high manganese steel Mn13 has been conductedat room and low temperature in this paper.Microstructure changes during strain cyclingand the mechanism of deformation and work hardening in high manganese steel have beeninvestigat

Key words: high manganese steel cyclic deformation work hardening deformation twin

Received: 25 February 1991

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1991/V5/I1/44

1 Dastur Y N,Leslie W C.Metall Trans,1981;12A:749
2 Adler P H,Olson G B,Owen W S.Metall Trans,1986;17A:1725
3 Remy L.Acta Metall.,1978;26:443W

[1]	YANG Jingcheng, WANG Lizhong, ZHONG Zhiping, ZHENG Yingjun. Flow Stress Prediction Model of 37CrS4 Special Steel Based on Dynamic Recrystallization[J]. 材料研究学报, 2021, 35(4): 284-292.
[2]	Delai OUYANG,Shiqiang LU,Xia CUI,Yong XU,Haiming DU,Huian ZHU. Kinetics of Dynamic Recrystallization of TB6 Ti-Alloy During Hot Compressive Deformation atTemperatures of β-phase Range[J]. 材料研究学报, 2019, 33(12): 918-926.
[3]	Zhengzhi ZHAO,Tingting TONG,Lan SU,Yan ZHANG. Mechanical Properties and Strengthen-toughening Mechanism of 1470 MPa Grade Dual-phase Steel[J]. 材料研究学报, 2014, 28(11): 828-834.
[4]	YANG Zhinan ZHANG Ming ZHANG Fucheng FENG Xiaoyong. Effect of High Current Density Electropulsing on the Microstructure of Later-Serviced High Manganese Steel Crossing[J]. 材料研究学报, 2011, 25(4): 342-346.
[5]	WANG Fuqiang WANG Lei LIU Yang FENG Hui WANG Peng. Fracture Toughness and Fracture Behavior of GH690 Alloy at Different Temperatures[J]. 材料研究学报, 2010, 24(3): 299-304.
[6]	DING Hao DING Hua TANG Zhengyou SONG Dan YANG Ping. Tensile strain hardening behavior of TRIP/TWIP steel with 18.8% manganese[J]. 材料研究学报, 2009, 23(4): 375-379.
[7]	ZHANG Zhefeng;WANG Zhongguang;LI Guangyi(State Key Laboratory for Fatigue and fracture of Materials;Institute of Metal Research; The Chinese Academy of Sciences; 110015 Shenyang). STRENGTHENING EFFECT OF GRAIN BOUNDARV ON COPPER BICRYSTAL UNDER CYCLIC LOADING[J]. 材料研究学报, 1998, 12(6): 587-593.
[8]	CHEN Rui;LI Jiabao;WANG Zhongguang;PANG Weichang;YAN Yinhuai(State Key Laboratoryfor Fatigue and Fracture of Materials. Institute of Metal Research; ChineseAcademy of Sciences 2. Northeast University). WORK HARDENING OF SHOT PEENING AFFECTED LAYER OF MATERIALS IN HARD STATE[J]. 材料研究学报, 1997, 11(1): 31-36.
[9]	ZHANG Zhefeng;TAN Xiaoli; GU Haicheng(Xi'an Jiaotong University). OBSERVATION ON CYCLIC DEFORMATION TWINS IN PURE TITANIUM[J]. 材料研究学报, 1996, 10(5): 477-482.
[10]	TAN Xiaoli; GU Haicheng(Xi'an Jiaotong Universitv)(Research Institute for Strength of Metals). SEM OBSERVATIONS ON CYCLIC DEFORMATION PROCESS OF Ti MONOCRYSTAL STRESSED ALONG [0001][J]. 材料研究学报, 1995, 9(2): 103-106.
[11]	YAO Daping;HU Zhuangqi;LI Yiyi;ZHANG Yun;SHI Changxu(C.H.Shih)(Institute of Metal Research;Academia Sinica). MECHANICAL PROPERTIES OF BINARY Al-Li ALLOYS AT CRYOGENIC TEMPERATURE[J]. 材料研究学报, 1990, 4(4): 309-313.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed