EFFECT OF LASER PROCESSING PARAMETERS ON DILUTION OF THE CLADDED COATING

Chin J Mater Res

1994, Vol. 8

Issue (4): 315-318 DOI:

Current Issue | Archive | Adv Search

EFFECT OF LASER PROCESSING PARAMETERS ON DILUTION OF THE CLADDED COATING

ZHU Beidi;ZENG Xiaoyan; TAO Zengyi; CUI Kun (Huazhong University of Science and Technology)

Cite this article:

ZHU Beidi;ZENG Xiaoyan; TAO Zengyi; CUI Kun (Huazhong University of Science and Technology). EFFECT OF LASER PROCESSING PARAMETERS ON DILUTION OF THE CLADDED COATING. Chin J Mater Res, 1994, 8(4): 315-318.

Download:

PDF(313KB)
Export: BibTeX | EndNote (RIS)

Abstract The effect of laser processing parameters with an auto-feeding system on the dilution of the cladded coating has been investigated. The results indicate that the powder now rate plays the most important role in the dilution of the cladded coating, which d

Key words: laser cladding dilution processing parameters

Received: 25 August 1994

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1994/V8/I4/315

1曾晓雁,朱蓓蒂,陶曾毅,房大川,崔昆．中国激光,1993;A20(3):2102BruckGJ．Journalofmetals,1987;81(2):103曾晓雁,朱蓓蒂,陶曾毅,房大川,崔昆．金属热处理,1993;35(7):224AbbasG,WestDRF．Wear,1991;143(3):35

[1]	TIAN Zhigang, LI Xinmei, QIN Zhong, WANG Xiaohui, LIU Weibin, HUNG Yong. Microstructure and Wear Resistance of CoCrFeNiTi _x High Entropy Alloy Coating[J]. 材料研究学报, 2023, 37(3): 219-227.
[2]	LI Rui, WANG Hao, ZHANG Tiangang, NIU Wei. Microstructure and Properties of Laser Clad Ti₂Ni+TiC+Al₂O₃+Cr_xS_y Composite Coating on Ti811 Alloy[J]. 材料研究学报, 2022, 36(1): 62-72.
[3]	LIU Qian, WANG Xinyang, HUANG Yanbin, XIE Lu, XU Quan, LI Linhu. Effect of Molybdenum Content on Microstructure and Corrosion Resistance of CoCrFeNiMo High Entropy Alloy[J]. 材料研究学报, 2020, 34(11): 868-874.
[4]	Qiushi GAO, Hua YAN, Yang QIN, Peilei ZHANG, Zhengfei CHEN, Jialong GUO, Zhishui YU. Self-lubricating Wear Resistant Composite Coating Ti-Ni+TiN+MoS₂/TiS Prepared on Ti-6Al-4V Alloy by Laser Cladding[J]. 材料研究学报, 2018, 32(12): 921-928.
[5]	Longzhi ZHAO, Haichao YANG, Mingjuan ZHAO, Yujiang XIE. In-situ TiC/FeAl Composite Coating Fabricated by Laser Cladding[J]. 材料研究学报, 2017, 31(11): 860-866.
[6]	CHENG Hua ZHANG Xin ZHANG Guangcheng LIU Ruhong WU Aimin SHI Nanlin. The Preparation of Microcrystalline Si Films Deposited by ECR-PECVD Using SiH4+Ar[J]. 材料研究学报, 2010, 24(5): 547-549.
[7]	ZHANG Yaping;GAO Jiacheng;WEN Jing (Department of Metallumy and Materials Engineering; Chongqing University;Chongqing 400044). PREMRATION OF COMPOSING BIOCERAMIC LAYER ON TITANIUM ALLOY BY LASER SURFACE CLADDING[J]. 材料研究学报, 1998, 12(4): 423-426.
[8]	GAO Jiacheng;ZHANG Yaping;WEN Jing (Department of Metallurgy and Materials Engineering; Chongqing University; Chongqing 400044). EFFECT OF Y_2O_3 ON THE PROPERTIES OF THE BIOCERAMIC COATING BY LASER CLADDING[J]. 材料研究学报, 1998, 12(1): 95-98.
[9]	ZHANG Yaping; GAO Jiacheng; TAN Jifu; ZOU Zhirong(Chongqing University). LASER BIOCERAMIC COMPOSITE COATING[J]. 材料研究学报, 1994, 8(1): 93-96.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed