2001, Vol. 15

Issue (3): 287-290 DOI:

Research Articles

Current Issue | Archive | Adv Search

Cite this article:

. . Chin J Mater Res, 2001, 15(3): 287-290.

Download:

PDF(513KB)
Export: BibTeX | EndNote (RIS)

Key words:

Received: 01 January 1900

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2001/V15/I3/287

1陆力,水机磨蚀,7,11(1991)(LU Li, Abrasion and Cavitation in Hydraulic Machinery, 7, 11(1991))
2徐学家,寇希颜,水机磨蚀,35,38(1990)(XU Xuehao, KOU Xiyan, Abrasion and Cavitation in Hydraulic Machinery, 35, 38(1990))
3苏虹,水机磨蚀,86(1985)(SU Hong, Abrasion and Cavitation in Hydraulic Machinery, 86(1985))
4 P.D.Jarman, K.J.Taylor, Brit.Jr.Appl.Phys,, 321(1964)
5 R.T.Knapp, J.W.Dailyl F.G.Hammit, Cavitation, 水利水电科学研究院译 (北京,水利出版社,1981) p.98(R.T.Knapp, J.W.Daily, F.G.Hannit, Cavitation, 98, Translated by Chinese Academy of Hydraulic--power(BeiJing, Hydraulic Press, 1981))
6王者昌.梁亚南,郑凤珍,梁殿清.白良谋,姚启鹏,于江城, GB1堆焊金属磨蚀试验研究,第 12届申国水电设备学术讨论会论文集,四川省水力发电工程学会编辑,(重庆,四川省水力发电工程学会,1995)P.316(WANG Zechang, LIANG Yanan, ZHENG Fengzhen, LIANG Dianqing, BAI Liangmou, YAO Qipeng, YUJiangcheng, Abrasion and Cavitatiou Erosion investigation of GB1Overlaid Metal, 316, Proceeding of the12th Symposium on Chinese Hydraulic Power Equipment)
7 T.Okada, Y.Iwai, S.Hattor, N.Tanimura, Wear, 184, 231(1995)4

[1]	Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2]	. [J]. 材料研究学报, 2006, 20(4): 348-353.
[3]	. [J]. 材料研究学报, 2006, 20(2): 191-196.
[4]	. [J]. 材料研究学报, 2006, 20(3): 322-326.
[5]	. [J]. 材料研究学报, 2002, 16(4): 425-428.
[6]	Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7]	. [J]. 材料研究学报, 2005, 19(6): 651-656.
[8]	SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9]	ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10]	. [J]. 材料研究学报, 2003, 17(4): 433-438.
[11]	LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12]	HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13]	CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14]	Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15]	. [J]. 材料研究学报, 2001, 15(3): 303-307.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed