2001, Vol. 15

Issue (1): 23-28 DOI:

Research Articles

Current Issue | Archive | Adv Search

Cite this article:

. . Chin J Mater Res, 2001, 15(1): 23-28.

Download:

PDF(661KB)
Export: BibTeX | EndNote (RIS)

Key words:

Received: 01 January 1900

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2001/V15/I1/23

1 H.M.Sung, C.J.Chen, W.S.Ko, H.C.Lin, Fine powder ferrite for multilayer chip inductors, IEEE Trans.Magn., 3O(6), 4906(1994)
2 H.M.Sung, C.J.Chen, W.S.ko, H.C.Lin, Fine powder ferrite for multilayer chip inductors, IEEE Trans.Magn., 3O(6), 4906(1994)
3 T.Nakamura, Low-temperature sintering of Ni-Zn-Cu ferrite and its permeability spectra, J.Magn.Mater.,168, 285(1997)
4 J .H.Jean, C.H.Lee, Effects of lead oxide on processing and properties of low-temperature-cofirable Ni-Cu-Znferrite, J.Am.Ceram.Soc., 82(2), 343(1999)
5 M.Fujimoto, Inner stress induced by Cu metal precipitation at grain boundaries in low-temperaturer-firedNi-Zn-Cu ferrite, J.Am.Ceram.Soc., 77(11), 2873(1994)
6 T.Nakamura, Y.Okano, S.Miura, Interfacial diffusion between Ni-Cu-Zn ferrite and Ag during sintering,J.Mater.Sci., 33, 1091(1998)
7 J.Y.Hsu, H.C.Lin, H.D.Shen, C.J.Chen, High frequency multilayer chip inductors, IEEE trans. Magn.,33(5), 3325(1997)
8岳振星,周济,张洪国,桂治轮,李龙土,硅酸盐学报,27(4),466(1999)(YUE Zhenxing, ZHOU Ji, GUI Zhilun, ZHANG Hongguo, LI Longtu, Journal of The Chinese CeramicSociety, 27(4), 466(1999))

[1]	Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2]	. [J]. 材料研究学报, 2006, 20(4): 348-353.
[3]	. [J]. 材料研究学报, 2006, 20(2): 191-196.
[4]	. [J]. 材料研究学报, 2006, 20(3): 322-326.
[5]	. [J]. 材料研究学报, 2002, 16(4): 425-428.
[6]	Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7]	. [J]. 材料研究学报, 2005, 19(6): 651-656.
[8]	SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9]	ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10]	. [J]. 材料研究学报, 2003, 17(4): 433-438.
[11]	LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12]	HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13]	CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14]	Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15]	. [J]. 材料研究学报, 2001, 15(3): 303-307.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed