Please wait a minute...
Chin J Mater Res  2002, Vol. 16 Issue (3): 246-250    DOI:
Research Articles Current Issue | Archive | Adv Search |
Cite this article: 

. . Chin J Mater Res, 2002, 16(3): 246-250.

Download:  PDF(738KB) 
Export:  BibTeX | EndNote (RIS)      
Key words:       
Received:  01 January 1900     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2002/V16/I3/246

1 Yoichiro Ichikawa,Yasumasa Akagawa,Hirosama Nikai and Hiromichi Tsuru,Tissue compatibility and stability of a new zirconia ceramic in vivo,The Journal of Pros- thetic Dentistry,68(2),322(1992)
2 WANG Dalin,LIU Ling,Review on application for dental ceramics,Foreign Medicine Sciences:Fascicule of Biomed- ical Engineering,20(2),97(1997) (汪大林,刘玲,牙科陶瓷材料应用研究现状,国外医学(生物医学工程分册),20(2),97(1997))
3 R.H.J.Hannink,P.M.Kelly,B.C.Muddle,Transformation toughening in zirconia-containing ceramics,Journal of American Ceramic Society,83(2),461(2000)
4 Massimiliano Guazzato,Kaarel Proos,Linda Quach and Michael Vincent Swain,Strength,reliability and mode of fracture of bilayered porcelain/zirconia(Y-TZP)dental ceramics,Biomateriais,25(20),5045(2004)
5 AndréR.Studart,Frank Filser,Peter Kocher and Ludwig J.Gauckler,Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges, Dental Materials,23(1),106(2007)
6 Harry P.Papanagiotou,Steven M.Morgano,Russell A. Giordano and Richard Pober,In vitro evaluation of low- temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP den- tal ceramics,The Journal of Prosthetic Dentistry,96(3), 154(2006)
7 Anders Sundh,Gran Sjgren,Fracture resistance of all-ceramic zirconia bridges with differing phase stabi- lizers and quality of sintering,Dental Materials,22(8), 778(2006)
8 O.Vasylkiv,Y.Sakka,V.Skorokhod,Low-temperature processing and mechanical of zirconia and zirconia-alu- mina nanoceramics,Journal of the American Ceramic So- ciety,86(2),299(2003)
9 X.W.Huang,S.W.Wang,X.X.Huang,Microstructure and mechanical properties of ZTA fabricated by liquid phase sintering,Ceramics International,29(7),765(2003)
10 YU Qinghua,WANG Jieqiang,ZHENG Shaohua,GAO Xinrui,WANG Yong,Preparation of ZTA nanoceramic composites by liquid-phase precipitation method,Acta Materiae Compositae Sinica,23(3),108(2006) (于庆华,王介强,郑少华,高新睿,王勇,液相沉淀法制备ZTA纳米复相陶瓷,复合材料学报,23(3),108(2006))
11 WANG Xin,YU Xuegang,SHAN Yan,SUN Yong,FAN Wentao,LIU Zifeng,On the fracture model of nano ZrO_2/micro Al_2O_3 composite ceramics,Chinese Journal of Materials Research,21(5),482(2007) (王听,于薛刚,单妍,孙勇,范文涛,刘子峰,纳米ZrO_2与微米Al_2O_3复合陶瓷的断裂模式,材料研究学报,21(5),482(2007))
12 LIN Jie,YANG Jian,LIU Jiao,QIU Tai,ZTA ceramics with nanometer composite powders,Journal of Materials Science and Engineering,25(5),760(2007) (林洁,杨建,刘娇,丘泰,用包裹纳米复合粉体制备ZTA陶瓷,材料科学与工程学报,25(5),760(2007))
13 DUAN Guorong,YANG Xujie,LU Lude,WANG Xin, Preparation of single-phase nanosized zirconia by sol-gel and distillation method,Journal of Synthetic Crystals, 35(2),327(2006) (段国荣,杨绪杰,陆路德,汪信,溶胶-凝胶/共沸蒸馏法制备单相氧化锆超细粉,人工晶体学报,35(2),327(2006))
[1] Xunzeng HUANG,Yitao YANG. High Temperature Oxidation Performance of a Nb and Ti Stabilized 430 Ferritic Stainless Steel[J]. 材料研究学报, 2014, 28(9): 641-648.
[2] . [J]. 材料研究学报, 2006, 20(4): 348-353.
[3] . [J]. 材料研究学报, 2006, 20(2): 191-196.
[4] . [J]. 材料研究学报, 2006, 20(3): 322-326.
[5] . [J]. 材料研究学报, 2002, 16(4): 425-428.
[6] Tingting LI,Yong HU,Xiaoming CUI,Zhijie YAN. Micro-hardness and Shear Bands of Zr-Al-Cu-Ni-Ag Bulk Metallic Glass Composites[J]. 材料研究学报, 2014, 28(10): 730-736.
[7] . [J]. 材料研究学报, 2005, 19(6): 651-656.
[8] SHAO Guoxiang CHEN Weixiao (Fudan University). THE CHEMICAL REACTIONS OCCURRING DURING MELT MIXING OF PBT AND LDPE MODIFIED BY GRAFTING OF DIBUTYLMALEATE[J]. 材料研究学报, 1991, 5(6): 518-523.
[9] ZHOU Benlian (Institute of Metal Research;Academia Sinica)(International Centre Materials Physics;Academia Sinica). SOME PROGRESS IN THE STUDY OF ADVANCED COMPOSITE MATERIALS[J]. 材料研究学报, 1991, 5(6): 524-532.
[10] . [J]. 材料研究学报, 2003, 17(4): 433-438.
[11] LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[12] HAO Jian, LIU Fang, YANG Shulin, YAO Xiaoyu, SUN Wenru. Effect of Melting Rate on Structure and Inclusions of GH4169G Alloy Ingot Fabricated by Argon Protected Electroslag Melting[J]. 材料研究学报, 2022, 36(11): 811-820.
[13] CHEN Yizi, ZHANG Chengshuang, CHEN Ping. Surface Graft Modification of Domestic PBO Fiber by Atmospheric Air Plasma[J]. 材料研究学报, 2021, 35(9): 641-650.
[14] Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15] . [J]. 材料研究学报, 2001, 15(3): 303-307.
No Suggested Reading articles found!