Chinese Journal of Materials Research  2013, Vol. 27 Issue (1): 75-79    DOI:

Current Issue | Archive | Adv Search |

Microstructure and Properties of Fe-based Amorphous Alloy Coating Deposited by Electro-spark Deposition Process

NIEYingshi1, 2 LI Wen1** LI Dengke2 ZHANG Bo2 ZHU Zhengwang2

1. College of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110159 2. Institute of Metal Research, Chinese Academy of Sciences, Shenyang Liaoning 110016

NIEYingshi,LI Wen** LI Dengke ZHANG Bo ZHU Zhengwang. Microstructure and Properties of Fe-based Amorphous Alloy Coating Deposited by Electro-spark Deposition Process. Chinese Journal of Materials Research, 2013, 27(1): 75-79.

Abstract References Related Articles Recommended Metrics Download:  PDF(5901KB)  Export:  BibTeX | EndNote (RIS)       Abstract  ABSTRACT Using Fe48Cr16Mo15C17B4 alloy rods as electrode materials, Fe-based amorphous coatings were prepared on the 1Cr18Ni9Ti stainless steel surface by electro-spark deposition technique. The microstructures of the coatings were characterized by XRD. The surface and cross section morphologies of the coatings were observed by SEM. The microhardness, wear resistance and electrochemical polarization curves of the coatings were measured. The results show that the coatings are amorphous, dense and metallurgically bonded to the matrix, and the microhardness is 1129 kg/mm2. Compared to the stainless steel matrix, the coatings have much better wear properties and more excellent corrosion resistance in 1 mol/L HCl aqueous solution. ZTFLH:  TG178   Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors NIEYingshi LI Wen** LI Dengke ZHANG Bo ZHU Zhengwang URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2013/V27/I1/75 1 HUO Xidong, CHEN Guoliang, Bulk Amorphous Alloy (Beijing, Chemical Industry Press，2010)p.75-80 (惠希东, 陈国良, 块体非晶合金(北京, 化学工业出版社, 2010)p.75-80) 2 HU Zhuangqi, ZHANG Haifeng, Recent progress in the area of bulk amorphous alloys and composites, Acta Metallurgica Sinica, 46(11), 1391 (2010) (胡壮麒, 张海峰, 块状非晶合金及其复合材料研究进展, 金属学报, 46(11), 1391(2010)) 3 F. Sanchette, A. Billard, C. Frantz, Mechanically reinforced and corrosion-resistant sputtered amorphous aluminium alloy coatings, Surface and Coatings Technology, 98(1), 1162(1998) 4 X. Wu, Y. Hong, Fe-based thick amorphous-alloy coating by laser cladding, Surface and Coatings Technology, 141(2), 141(2001) 5 T. Yue, Y. Su, H. Yang, Laser cladding of Zr65Al7.5Ni10Cu17.5 amorphous alloy on magnesium, Mater. Lett, 61(1), 209（2007） 6 S. J. Pang, T. Zhang, K. Asami, A. Inoue, Bulk glassy Fe-Cr-Mo-C-B alloys with high corrosion resistance, Corrosion Science, 44(8), 1847(2002) 7 M. Stoica, J. Eckert, S. Roth, A. R. Yavari, L. Schultz, Mechanical behavior of Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk metallic glass, Intermetallics, 13(7), 764（2005） 8 W. D. Liu, K. X. Liu., Q. Y. Chen, J. T. Wang, H. H. Yan, X. J. Li, Metallic glass coating on metals plate by adjusted explosive welding technique, Applied Surface Science, 255(23), 9343（2009） 9 Z. Zhou, L. Wang, F. C. Wang, H. F. Zhang, Y. B. Liu, S. H. Xu, Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying, Surface & Coatings Technology, 204(5), 563（2009） 10 GUO Jinhua, LU Caowei, NI Xiaojun, WU Jiawei, LU Zhichao, LIAN Fazeng, Microstructure and properties of Fe-based amorphous hard coatings prepared by electric arc spraying, China Surface engineering, 19(5), 45（2006） (郭金花, 陆曹卫, 倪晓俊, 吴嘉伟, 卢志超, 连法增, 电弧喷涂Fe基非晶硬质涂层的组织及性能研究, 中国表面工程, 19(5), 45(2006)) 11 X. Q. Liu, Y. G. Zheng, X. C. Chang, W. L. Hou, J. Q. Wang, Z. Tang, A. Burgess, Microstructure and properties of Fe-based amorphous metallic coating produced by high velocity axial plasma spraying, Journal of Alloys and Compounds, 84(1-2), 300(2009) 12 A. Basu, A. N. Samant, S. P. Harimkar, J. D. Majumdar, I. Manna, N. B. Dahotre, Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glass composition on AISI 4140 steel, Surface & Coatings Technology, 202(12), 2623(2008) 13 WANG Zhao, CHEN Jian, HE Jianjun, RONG Xuekun, LI Shide, Research and development status of the electro-spark surface strengthening technology, Heat Treatment Technology and Equipment, 29(6), 46(2008) (王 钊, 陈 荐, 何建军, 戎雪坤, 李石德, 电火花表面强化技术研究与发展概况, 热处理技术与装备, 29(6), 46(2008)) 14 D. W. Heard, M. Brochu, Development of a nanostructure microstructure in the Al-Ni system using the electro-spark deposition process, Journal of Materials Processing Technology, 210(6-7), 892(2010) 15 R. J. Wang, Y. Y. Qian, J. Liu, Interface behavior study of WC92-Co8 coating produced by electrospark deposition, Applied Surface Science, 240(1-4), 42(2005) [1] JIANG Menglei, DAI Binbin, CHEN Liang, LIU Hui, MIN Shiling, YANG Fan, HOU Juan. Effect of Building Dimensions by Selective Laser Melting on Pitting Properties of 304L Stainless Steel[J]. 材料研究学报, 2023, 37(5): 353-361. [2] PENG Haoping, XI Shiheng, CUI Derong, LIU Ya, DENG Song, SU Xuping, RUAN Ruiwen. Effect of Mn on Wetting Behavior of X80 Steel in Molten Zn-Mn Alloy[J]. 材料研究学报, 2021, 35(10): 785-794. [3] LIU Fuguang, CHEN Shengjun, PAN Honggen, DONG Peng, MA Yingmin, HUANG Jie, YANG Erjuan, MI Zihao, WANG Yansong, LUO Xiaotao. Thermally Sprayed Thermal Barrier Coating of MCrAlY/8YSZ with Hybrid Microstructure and Its Spallation Resistance[J]. 材料研究学报, 2021, 35(4): 313-320. [4] Kunmao Li,Jing LIU,Xiaoyan ZHANG,Hong LI,Yan DAI. Corrosion Behavior of Carburized Ti6Al4V Ti-alloy in HF Solution[J]. 材料研究学报, 2019, 33(7): 543-551. [5] . Oxidation and corrosion behaviors of NdFeB Magnet prepared by spark plasma sintering[J]. 材料研究学报, 2004, 18(2): 167-170. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed