Chin J Mater Res  1998, Vol. 12 Issue (6): 594-597    DOI:

Current Issue | Archive | Adv Search |

MICROMORPHOLOGIES OF Al-Si ALLOY FOR A RAPID SOLIDIFICATION WITH A DOUBLE-ROLLER METHOD

YU Jueqi;HUANG Hongwu;HUANG Guixiang;YIN Bangyao(College of Mech. 8 Auto. Engineering) Hunan University; Champha 410082 )

YU Jueqi;HUANG Hongwu;HUANG Guixiang;YIN Bangyao(College of Mech. 8 Auto. Engineering) Hunan University; Champha 410082 ). MICROMORPHOLOGIES OF Al-Si ALLOY FOR A RAPID SOLIDIFICATION WITH A DOUBLE-ROLLER METHOD. Chin J Mater Res, 1998, 12(6): 594-597.

Abstract References Related Articles Recommended Metrics Download:  PDF(1029KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The Al-12.45Si alloy ribbons prepared by double rollers method have hypo-eutectic morphology. The Si phase with morphology of particles was even distributed in α-Al phase base. During formation of ribbon and process of colting, parts of Si which were supe Key words:  double-roller method      rapid solidifying      Al-Si alloy      micromorphology      solubility      Received:  25 December 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1998/V12/I6/594 1魏明义,傅恒志.金属学报,32(8),817(199) 2柳林,董远达,何估贞.材料科学进展,2(5),50(198) 3N.Apnydin, R.W.Sndth, Mater. Set. Eng, 98, 149(1988) 4R.Deha,Th.H.Dekeijser,E.J.Mittemeijer P.Van Mourik,N.M.Van Derpers,L Katgerman,W.E.zalm.J. Mater. Set, 17, 2887(1982) 5程天一,章守华.快速凝固技术与新型合金(北京,宇航出版社,1990)P.131 6马锡良.铝带坯连续外轧生产(长沙,中南工业大学出版社,1992)p.213 7李顺补,陈熙琛,金属学报31(2),A47(1995) 8C.Antonine, L.Battezzatl, P.Marino.J.Mater Set. Lett. 5, 586(1986) 9徐祖耀,金属学原理(上海,上海科学技术出版社,1964)p.451 10陈明安,虞觉奇,雷泽英,材料研究学报,9(4),299(1995) [1] LIU Chao, WEN Feng, CHEN Jiqiang, ZHAO Hongjin, LI Qilong, ZHOU Jianpeng. Effect of Sc and Zr Addition and Annealing Treatment on Mechanical Properties of As-cast Al-Si Alloy[J]. 材料研究学报, 2021, 35(2): 93-100. [2] Shixu JIANG, Chao ZHOU, Tiancai ZHANG, Yanmin GAO. Effect of Solubility Parameter of Alcohols Solvents on Performance of Cu2ZnSnS4 Particles[J]. 材料研究学报, 2016, 30(11): 861-867. [3] Kefei LIU,Chaofan WU. Evaluation Method for Compatibility of Sasobit Warm Mix Asphalt Binder[J]. 材料研究学报, 2015, 29(9): 707-713. [4] GAO Xiping, LIU Cuiyun, TANG Keyong, ZHANG Yuqing. Influence of Glyoxal Cross Linking on Properties of Gelatin/PVA Biodegradable Composite Films[J]. 材料研究学报, 2013, 27(2): 173-177. [5] TANG Rui YANG Xiaoxue. Study on terminal solid solubility of hydrogen in N18, Zry–4 and M5 zirconium alloys[J]. 材料研究学报, 2009, 23(6): 635-639. [6] ;. Control of solidified structures of Al--Si hypereutectic alloy by using intense magnetic fields[J]. 材料研究学报, 2004, 18(6): 568-576. [7] JIE Wanqi(Stale Key Laboratory of Solidification Processing;Northwestern Polytechnical University)(Correspondent:JIE Wanqi;State Key Laboratory of Solidification Processing;Northwestern Polytechnical University;Xi'an 710072). CHARACTERISTICS OF SOLUTE REDISTRIBUTION DURING CRYSTAL GROWTH OF CdTe AND THE SELECTION OF GROWTH PARAMETERS[J]. 材料研究学报, 1996, 10(3): 259-263. [8] CHEN Mingan; YU Jueqi; LEI Zeying(Hunan University). STUDY ON STRENGTHENED RIBBONS OF Al-Si ALLOYS BY LIQUID ROLLING[J]. 材料研究学报, 1995, 9(4): 299-302. [9] NING Yuantao (Institute of Precious Metals;Kunming). PHASE SRUCTURE IN RAPIDLY SOLIDIFIED SILVER-RICH Ag-RE ALLOYS[J]. 材料研究学报, 1993, 7(4): 327-332. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed