|
|
|
| EFFECT OF LUBRICANTS ON FRICATION AND WEAR OF Ti(CN)/45~# STEEL SLIDING PAIRS |
| ZHAO Xingzhong; LIU Jiajun; ZHU Baoliang; LUO Zhenbi; MlAO Hezhuo(Tsinghua University) |
|
Cite this article:
ZHAO Xingzhong; LIU Jiajun; ZHU Baoliang; LUO Zhenbi; MlAO Hezhuo(Tsinghua University). EFFECT OF LUBRICANTS ON FRICATION AND WEAR OF Ti(CN)/45~# STEEL SLIDING PAIRS. Chin J Mater Res, 1997, 11(5): 467-472.
|
|
|
Abstract The friction and wear properties of Ti(CN) / 45# steel rubbing pairs were investigated underdry and lubricated conditions by using a pin on-disk tribometer. The selected speed range was 0.8 to 3.2m.s 1, the load range was 58.8 to 235.2N. The Iubricants us
|
|
Received: 25 October 1997
|
1.刘家浚材料磨损原理及其耐磨性(北京,清华大学出版社,1993) P270
2. K.Kim, H.Liang, D.Shin, T.E. Fischer, in Proceedingr of Ist Internaiional Symposium on Tribology, edited byY.S.Jin (Beijng, 1993) p.380
3. S.Jahanmir, X.Dong, in Proceedingr of Ist International Symposium on Tribology, edited by Y.S. Jin (Beijing, 1993)P.362
4. M.Akazawa, K.Kato, Wear. 124(1), 123(1988)
5. P.Anderson, K.Holmberg, Wear. 175(1).1(1994)
6. G.W. Stachowiak, G.B. Stachowiak, Wear. 132(3), 151(1989)
7. 谭美田. 金属切削微观研究(上海,上海科学技术出版社,1988) P.104
8. D.H.Buckley, K.Miyoshi, Wear. 100(2), 333(1984) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
