Chin J Mater Res  1994, Vol. 8 Issue (3): 193-208    DOI:

Current Issue | Archive | Adv Search |

ATOMIC CONFIGURATIONS IN THE MARTENSITE AND BAINITE PHASES OF SOME ORDERED ALLOYS DETERMINED BY THE ALCHEMI MEASUREMENTS

(Department of Mechanical Engineering. Kanazawa Institute of Technology)(The Institute of Scientific and Industrial Research. Osaka Unlversity)

(Department of Mechanical Engineering. Kanazawa Institute of Technology)(The Institute of Scientific and Industrial Research. Osaka Unlversity). ATOMIC CONFIGURATIONS IN THE MARTENSITE AND BAINITE PHASES OF SOME ORDERED ALLOYS DETERMINED BY THE ALCHEMI MEASUREMENTS. Chin J Mater Res, 1994, 8(3): 193-208.

Abstract References Related Articles Recommended Metrics Download:  PDF(2362KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The atomic configuration in the parent and martensite phases of Cu-Zn-Al alloys and in the parent, martensite and bainite phases of Cu-An-Zn alloys have been examined by the atom location by channelling enhanced microanalysis (ALCHEMI) method, although th Key words:  martensite      bainite      ALCHEMI      Received:  25 June 1994      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1994/V8/I3/193 1SpenceJCH,TaftJ．JElectronMicroscopy,1983;130:1472ShindoD,HirabayashiM,KawabataTetal．JElectronMicroscopy．1986:35:4093NakataY,TadakiT,ShimizuK．MaterTransJIM,1990;31:6524NakataY,TadakiT,ShimizuK．Ultramicroscopy,1991:39:705ScarsbrookG,CookJ,StobbsWM．JPhys．1982:43:C4-7036MantelM,RapacioliR,GueninG．ProcICOMAT-86,Nara．JpnIustMetals,1986:880．7JanssenJ,VanHumbeckJ,ChandrasekaranMetal．JPhys．1982:43:C4-7158deGraefM,VanHumbeeckJ,DelaeyL．Proc．ICOMAT-86．Nara:JpnIustMetals．1986:8509AbuArabA,ChandrasekaranM,AblersM．ScriptaMetall,1984;18:70910AbuArabA,ChandrasekaranM,AblersM．ScriptaMetall．1984:18:112511VanHumbeeckJ,JanssenJ,MwanbaNetal．ScriptaMetall,1984:18:89312AbuArabA,AblersM．ActaMetall,1988;36:2627I3SuzukiT,KojimaR,FujiiYetal．ActaMetall,1989;36:16314WuMH,WaymanCM．MaterSetForum,1990:56-58:55315NakataY．YamamotoO,ShimizuK．MaterTransJIM．1993;34:42916NishiyamaZ,KakinokiJ,KajiwaraS．JPhysSocJpn,1965;20:119217DugginMJ,RachingerWA．ActaMetall．1964;12:101518KuboH,ShimizuK．TransJIM,1976;17:33019TadakiT,OkazakiH,NakataYetal．MaterTransJIM．1990:11:93520TadakiT,CatJQ,ShimizuK．MaterTransJIM,1991;32:75721TadakiT,ShimizuK．MetallTrans,MetallTrans,1994:25A:inpress [1] YU Xingfu, WANG Shengyu, WANG Yupeng, YANG Shuxin, YANG Yu, SU Yong, FENG Xiaochuan. Effect of Vacuum Graded Quenching on Microstructure and Mechanical Properties of 8Cr4Mo4V Steel[J]. 材料研究学报, 2022, 36(6): 443-453. [2] YIN Cunhong, LI Shaobo, LIANG Yilong. Energy Analysis and Corresponding Model of Friction Strain-induced Solid State Amorphization of Lath Martensite[J]. 材料研究学报, 2020, 34(4): 254-262. [3] Fanfan FENG,Huibin WU,Xinpan YU. Thermal Stability of Nanoscale Bainite/Martensite Steel[J]. 材料研究学报, 2019, 33(8): 597-602. [4] Huipeng LI, Yi XIONG, Yan LU, Tiantian HE, Meixiang FAN, Fengzhang REN. Effect of Strain Rate on Microstructure Evolution and Mechanical Property of 316LN Austenitic Stainless Steel at Cryogenic Temperature[J]. 材料研究学报, 2018, 32(2): 105-111. [5] Yulin MA, Yue LIU, Liping ZHANG, Ling ZHOU, Chunming LIU. Effect of B Content on Morphology and Properties of BN Phase in Martensite Heat Resistant Steel[J]. 材料研究学报, 2017, 31(5): 345-351. [6] Guoqiang WANG, Zibo ZHAO, Bingbing YU, Zhiyong CHEN, Qingjiang WANG, Rui YANG. Effect of Heat Treatment Process on Microstructure and Mechanical Properties of Titanium Alloy Ti6246[J]. 材料研究学报, 2017, 31(5): 352-358. [7] TANG Cunjiang, SHANG Chengjia, GUAN Hailong, WANG Xuemin. Strain Hardening Behavior and Stress Ratio of High Deformability Pipeline Steel with Ferrite/Bainite Multi-phase Microstructure[J]. 材料研究学报, 2016, 30(6): 409-417. [8] Wei PAN,Zulai LI,Quan SHAN,Yehua JIANG,Zhiyang FENG,Rong ZHOU. Effect of Heat Treatment Process on Mechanical Properties of a Medium Carbon Low Alloy Steel[J]. 材料研究学报, 2015, 29(6): 422-428. [9] Jianguo HE,Aimin ZHAO,Yao HUANG,Chao ZHI,Fuqing ZHAO. Effect of Warm Rolling Process on Phase Transformation, Microstructure and Mechanical Properties of Nano-bainite Steel[J]. 材料研究学报, 2015, 29(3): 207-212. [10] Min ZHANG,Xiaolong REN,Kui XING,Jihong LI. Microstructure and Low Temperature Toughness of Weld Joints Prepared by Double-sided Submerged Arc Welding for Low Carbon Bainite Steel[J]. 材料研究学报, 2015, 29(10): 737-743. [11] ZHANG Min, WU Weigang, LI Jihong, ZHI Jinhua, ZHANG Haicun. Effect of Coating Alloying Element on Microstructure and Properties of the Welded Joint of Basic Electrode[J]. 材料研究学报, 2013, 27(2): 113-118. [12] DUAN Linna LIU Qingyou JIA Shujun JIA Chengchang TAN Fengliang. Microstructure Characteristics and Strength-toughness of X100 Pipeline Steel[J]. 材料研究学报, 2012, 26(4): 443-448. [13] FAN Junling GUO Xinglin WU Chengwei DENG Dewei. Effect of Heat Treatments on Fatigue Properties of FV520B Steel Using Infrared Thermography[J]. 材料研究学报, 2012, 26(1): 61-67. [14] LI Shaoqiang LIU Jianrong WANG Qingjiang YAN Wei LI Yulan YANG Rui. Preparation and Characterization of High Temperature Titanium Alloy Ti–60 Powders[J]. 材料研究学报, 2010, 24(1): 10-16. [15] WANG Cunyu SHI Jie LIU Su DU Shaofeng DONG Han. Study on three--body impact--abrasion of steel treated by quenching--partitioning--tempering process[J]. 材料研究学报, 2009, 23(3): 305-310. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed