Chin J Mater Res  1992, Vol. 6 Issue (3): 195-198    DOI:

Current Issue | Archive | Adv Search |

PREPARATION OF AMORPHOUS Ni-Zr ALLOY BY MECHANICAL ALLOYING

LI Gusong;MIAO Weifang;LI Shuling;DING Bingzhe;WANG Jingtang(Institute of Metal Research;Academia Sinica;State Key Laboratory of RSA)

LI Gusong;MIAO Weifang;LI Shuling;DING Bingzhe;WANG Jingtang(Institute of Metal Research;Academia Sinica;State Key Laboratory of RSA). PREPARATION OF AMORPHOUS Ni-Zr ALLOY BY MECHANICAL ALLOYING. Chin J Mater Res, 1992, 6(3): 195-198.

Abstract References Related Articles Recommended Metrics Download:  PDF(894KB)  Export:  BibTeX | EndNote (RIS)       Abstract  Amorphous Ni_(70)Zr_(30) alloy was synthesized by mechanical alloying the corre-sponding elemental powders in a Spex 8000 Mixer/Mill.The microstructure and phases of thepowders at various milling times were examined,as well as microhardness and particle s Key words:  mechanical alloying      amorphization      Ni-Zr alloy      Received:  25 June 1992      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1992/V6/I3/195 1 Politis C,Jahnson W L.J Appl Phys,1986;60:1147 2 Koch C C.J Non-cryst Solids,1990;117/118:670 3 Calka A,Dogany A D,Shanrs R A et al.Mater Sci Eng,1990; A128:107 4 Schwarz R B,Petrich R R,Saw C K.J Non-Cryst Solids,1985;76:281 5 Hellstern E,Schultz L.Appl Phys Lett,1986;46:1163 6 Schultz L.J Mater Sci,1988;97:15f [1] SHAO Mengmeng, CHEN Zhaoke, XIONG Xiang, ZENG Yi, WANG Duo, WANG Xuhui. Effect of Si2+ Ion Beam Irradiation on Performance of C/C-ZrC-SiC Composites[J]. 材料研究学报, 2023, 37(6): 472-480. [2] YIN Cunhong, LI Shaobo, LIANG Yilong. Energy Analysis and Corresponding Model of Friction Strain-induced Solid State Amorphization of Lath Martensite[J]. 材料研究学报, 2020, 34(4): 254-262. [3] Xiantun HUANG, Peilin QING, Weihe SHI. Influence of Boron, Single-layer Graphene and Multi-layer Graphene on Hydrogen Storage Property of Mg-Al Alloy[J]. 材料研究学报, 2017, 31(12): 931-938. [4] LI Xiaolong, ZHAO Ming, ZHUANG Daming, GONG Qianming, CAO Mingjie, OUYANG Liangqi, GUO Li, SUN Rujun, GAO Zedong. Reaction Mechanism of Cu(In, Ga)Se2 Formation During Milling Process of Powder Mixture of Cu2Se, In2Se3 and Ga2Se3[J]. 材料研究学报, 2016, 30(1): 1-5. [5] WANG Huihua,SUN Shuchen, WANG Deyong, ZHU Xiaoping, TU Ganfeng. Fabrication of TiB2-TiC Multiphase Ceramics via High Energy Ball Milling and Subsequent Pressureless Sintering[J]. 材料研究学报, 2013, 27(5): 489-494. [6] ZHOU Min LI Laifeng LI Jingfeng. AgPbSbTe Thermoelectric Materials Fabricated by Mechanical Alloying and Spark Plasma Sintering (SPS)[J]. 材料研究学报, 2010, 24(2): 154-158. [7] . Formation of nanocrystalline spinel Ni--Zn ferrite by mechanical alloying[J]. 材料研究学报, 2004, 18(3): 315-320. [8] . Martensite formation during mechanical alloying of Fe--Ni and martensitic transformation[J]. 材料研究学报, 2004, 18(3): 327-331. [9] CHE Xiaozhou;ZHU Min; LI Zuxin(Dept. Mechanics Electronics; South China University of Technology; Guangzhou 510641)WANG Qian;HU Genghang(Shanghai Jiaotong University). DISORDERING AND AMORPHIZATION OF Al_3Ti-BASED INTERMETALLICS[J]. 材料研究学报, 1998, 12(5): 549-551. [10] MA Qin; YU Ning; KANG Mokuang; YANG Yanqing(College of Materials Science and Engineering; Northwestern Polytechnical University;Xi'an 710072 Department of Materials Engineering; Gansu University of Technology;Lanzhou 730050). MICROSTRUCTURAL EVOLUTION IN MECHANICAL ALLOYED Mo-67%Si ELEMENTAL POWDERS MIXTURE[J]. 材料研究学报, 1998, 12(3): 267-271. [11] PAN Feng; LIU Baixin (Department of Materials Science and Engineering; Tsinghua University; Beijing 100084). AMORPHIZATION IN THE IMMISCIBLE SYSTEMS BY SOLID STATE REACTION[J]. 材料研究学报, 1998, 12(3): 311-313. [12] LOU Taiping; LI Fushan HONG Jun; CHEN WanjinDING Bingzhe; HU Zhuangqi( National Key Lab for RSA; Institute of Metal Researeh; The Chinese Academy of Sciences;Shenyang 110015 Siping Normal College). AMORPHIZATION OF Cu-Ti-Fe-Nb SYSTEMS BY MECHANICAL ALLOYING[J]. 材料研究学报, 1998, 12(3): 320-322. [13] ZHENG Mingxin;ZHANG Xiang;ZHENG Zhongyu(Tsinghua University). EFFECT OF CHEMICAL BONDING CHARACTER OF INTERMETALLIC COMPOUNDS ON THEIR GLASS FORMATION TENDENCY IN THE PROCESS OF MECHANICAL ALLOYING[J]. 材料研究学报, 1996, 10(5): 501-504. [14] JIAO Hongzhen; GAO Wenli; ZHANG janrong; DU Youwei (Nanjing University)(Correspondent:Department of Physics;Nanjing University;Nanjing 210008). STUDY FOR MECHANICAL ALLOYING OF Fe─M BY MOSSBAUER SPECTROSCOPY[J]. 材料研究学报, 1996, 10(4): 401-403. [15] YANG Yuanzheng;YANG Liujing;LIU Zhengyi(South China University of Technology)MA Xueming DONG Yuanda(Shanghai University)ZHUANG Yuzhi(InStitute of Metal Research. Chinese Academy of Sciences)(Correspondent:YANG Yuanzheng; Department of Mechanical Engineeri. FORMATION OF AMORPHOUS AND NANOCRYSTALLINE ALLOYS OF Fe-B BY MECHANICAL ALLOYING[J]. 材料研究学报, 1995, 9(1): 33-39. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed