Please wait a minute...
材料研究学报  1991, Vol. 5 Issue (2): 134-137    
  研究论文 本期目录 | 过刊浏览 |
拉伸应力—应变曲线的微观分析
滕凤思;王煜明
吉林大学材料科学研究所;长春130023;吉林大学
MICROSCOPIC ANALYSIS OF TENSILEσ-εCURVES
TENG Fengen WANG Yuming (Jilin University)
引用本文:

滕凤思;王煜明. 拉伸应力—应变曲线的微观分析[J]. 材料研究学报, 1991, 5(2): 134-137.
, . MICROSCOPIC ANALYSIS OF TENSILEσ-εCURVES[J]. Chin J Mater Res, 1991, 5(2): 134-137.

全文: PDF(336 KB)  
摘要: 本文以实验事实证明宏观的σ-ε曲线的非唯一性。由于材料成分、体积、试样历史及处理条件以及试样试验温度、压力和环境等的不同,宏观本构方程中变量ε的系数K 和幂指数n 一定是不同的。只有上述热力学参数与外加应力σ同时被确定,才会有宏观应力σ与宏观应变ε之间一一对应的确定关系。但实验发现:不同热历史条件下宏观应力σ与微观应变ε_(mic)或位错亚结构分布组态之间总是存在一一对应的确定关系。
关键词 应力—应变曲线微观分析    
Abstract:Based on the previous determinations of dislocation substructure of α brasssamples A,B,C,D,the nonunique nature of macrostress (σ) macrostrain (ε) curves is ex-plained by the experiments.There is a definitive relationship between σ and ε,and an one toone
Key wordsstress-stain curves    Microscopic analysis
收稿日期: 1991-04-25     
1 Billington E W et al.The Physics of Deformation and Flow,New York:Mcgraw-Hill International Book Company,1981;364
2 George Krauss.Deformation Processing and Structure,ASM,Metals Park,Ohio:1984:1
3 George Krauss.Deformation Proceessing and Structure,ASM,Metals Park,Ohio:1984:425
4 Teng F E et al.J Mater Sci,1986;21(9) :3223
5 Teng F E et al.Acta Physica Sinica,1989;38(11) :1845
6 Wang Y M et al.J Appl Cryst,1982;15(1) :35
7 Wilson D V et al.Acta Metall,1986;34(6) :1107
8 Price Hirth J et al.Theory of Dislocation,2nd ed.New York:John Wiley and Sons,1982:289
9 Nabarro F R N et al.Advances in Physics,1964;6:193
10 Ashby F M et al.Engineering Materials 2 Oxford:Pergamon Press,1982:3-23
[1] 施渊吉,于林惠,于照鹏,成功,吴晓春,滕宏春. 热作模具钢DM的高温稳定性和热疲劳性能[J]. 材料研究学报, 2020, 34(2): 125-136.
[2] 杨杰 李树奎. 玻璃纤维增强气凝胶的动态力学性能及其破坏机理[J]. 材料研究学报, 2009, 23(5): 524-528.
[3] 马峻峰. SiC_w/AIN基复合材料增韧机理的微观分析[J]. 材料研究学报, 1993, 7(5): 414-418.