|
|
|
| BaTiO3陶瓷墨水的制备和性能 |
| 丁湘; 杨正方;袁启明 |
| 天津大学 |
|
引用本文:
丁湘; 杨正方; 袁启明 . BaTiO3陶瓷墨水的制备和性能[J]. 材料研究学报, 2002, 16(3): 246-250.
1 Yoichiro Ichikawa,Yasumasa Akagawa,Hirosama Nikai and Hiromichi Tsuru,Tissue compatibility and stability of a new zirconia ceramic in vivo,The Journal of Pros- thetic Dentistry,68(2),322(1992)
2 WANG Dalin,LIU Ling,Review on application for dental ceramics,Foreign Medicine Sciences:Fascicule of Biomed- ical Engineering,20(2),97(1997) (汪大林，刘玲，牙科陶瓷材料应用研究现状，国外医学(生物医学工程分册)，20(2)，97(1997))
3 R.H.J.Hannink,P.M.Kelly,B.C.Muddle,Transformation toughening in zirconia-containing ceramics,Journal of American Ceramic Society,83(2),461(2000)
4 Massimiliano Guazzato,Kaarel Proos,Linda Quach and Michael Vincent Swain,Strength,reliability and mode of fracture of bilayered porcelain/zirconia(Y-TZP)dental ceramics,Biomateriais,25(20),5045(2004)
5 AndréR.Studart,Frank Filser,Peter Kocher and Ludwig J.Gauckler,Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges, Dental Materials,23(1),106(2007)
6 Harry P.Papanagiotou,Steven M.Morgano,Russell A. Giordano and Richard Pober,In vitro evaluation of low- temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP den- tal ceramics,The Journal of Prosthetic Dentistry,96(3), 154(2006)
7 Anders Sundh,Gran Sjgren,Fracture resistance of all-ceramic zirconia bridges with differing phase stabi- lizers and quality of sintering,Dental Materials,22(8), 778(2006)
8 O.Vasylkiv,Y.Sakka,V.Skorokhod,Low-temperature processing and mechanical of zirconia and zirconia-alu- mina nanoceramics,Journal of the American Ceramic So- ciety,86(2),299(2003)
9 X.W.Huang,S.W.Wang,X.X.Huang,Microstructure and mechanical properties of ZTA fabricated by liquid phase sintering,Ceramics International,29(7),765(2003)
10 YU Qinghua,WANG Jieqiang,ZHENG Shaohua,GAO Xinrui,WANG Yong,Preparation of ZTA nanoceramic composites by liquid-phase precipitation method,Acta Materiae Compositae Sinica,23(3),108(2006) (于庆华，王介强，郑少华，高新睿，王勇，液相沉淀法制备ZTA纳米复相陶瓷，复合材料学报，23(3)，108(2006))
11 WANG Xin,YU Xuegang,SHAN Yan,SUN Yong,FAN Wentao,LIU Zifeng,On the fracture model of nano ZrO_2/micro Al_2O_3 composite ceramics,Chinese Journal of Materials Research,21(5),482(2007) (王听，于薛刚，单妍，孙勇，范文涛，刘子峰，纳米ZrO_2与微米Al_2O_3复合陶瓷的断裂模式，材料研究学报，21(5)，482(2007))
12 LIN Jie,YANG Jian,LIU Jiao,QIU Tai,ZTA ceramics with nanometer composite powders,Journal of Materials Science and Engineering,25(5),760(2007) (林洁，杨建，刘娇，丘泰，用包裹纳米复合粉体制备ZTA陶瓷，材料科学与工程学报，25(5)，760(2007))
13 DUAN Guorong,YANG Xujie,LU Lude,WANG Xin, Preparation of single-phase nanosized zirconia by sol-gel and distillation method,Journal of Synthetic Crystals, 35(2),327(2006) (段国荣，杨绪杰，陆路德，汪信，溶胶-凝胶/共沸蒸馏法制备单相氧化锆超细粉，人工晶体学报，35(2)，327(2006)) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
