材料研究学报  1996, Vol. 10 Issue (5): 472-476

研究论文 本期目录 | 过刊浏览 |

Al-Li单晶体锯齿流变的动力学特征

田宝辉;李焕喜;张永刚;陈昌麟

北京航空材料研究所;北京航空航天大学

THE KINETICS OF SERRATION IN Al-Li SINGLE CRYSTALS

TIAN Baohui(Beijing Institute of Aeronautical Materials)LI Huanxi;ZHANG Younggang;GHEN Changqi(Beijing University of Aeronautics and Astronautics)(Correspondent:TIAN B.H. Beijing Institute of Aeronautical Materials. Beijing 100095)

田宝辉;李焕喜;张永刚;陈昌麟. Al-Li单晶体锯齿流变的动力学特征[J]. 材料研究学报, 1996, 10(5): 472-476.
, , , . THE KINETICS OF SERRATION IN Al-Li SINGLE CRYSTALS[J]. Chin J Mater Res, 1996, 10(5): 472-476.

摘要 参考文献 相关文章 Metrics 全文: PDF(391 KB)   摘要: 研究了Al-Li单晶体锯齿流变的动力学特征,结果表明:锯齿的频率和幅度与时效状态、变形温度和加载的晶体学位向相关,并与δ′粒子被切割和固溶Li原子对位错的钉扎有关。 关键词 ： 锯齿流变,  频率,  幅度,  Al-Li单晶体     Abstract：The kinetics of serration in Al-Li single crystalsis studied. The results showthat frequency and ampliitude of serration varies with the aging conditions. The deformation temperatures and the crystal orientations of loading axes. The changs of frequency Key words： serrated flow;frequency;ampitude;single crystal/Al-Li 收稿日期: 1996-10-25      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 田宝辉 李焕喜 张永刚 陈昌麟 44.8K 链接本文: https://www.cjmr.org/CN/      或      https://www.cjmr.org/CN/Y1996/V10/I5/472 1CottrellAH,DislocationandPlasticFlowinCrystal,Clarendon,Oxford(1953)2McCormickPGActaMetall,1972,6:3513KubinLP,EstrinYActaMetall,1990,38:6974SchlipfJActaMetall,1992,40:20755ZamboSJ,McshaneHB．ScriMetall,1993,31:11496HuangJC,GrayGT．ScriMetall,1990,24:857RobinsonJM,ShawMP．IntMaterRev,1994,39:1138McCormickPG．ActaMetall,1971,19:4639HahnerPScriMetall,1993,29:117110JeanclaudeV,FressengeasC．ScriMetall,1993,29:117711HongKT,NamSW．ActaMetall,1989,27:3112KubinLP,StyczynskiA,EstrinY．ScriMetall,1992,26:142313KumarS,PinkE．ScriMetall,1995,32:74914BrechetY,EstrinY．ScriMetall,1994,31:185 [1] 刘伟,张晓红,刘锦华,梁建华,龙兴贵. 脉冲频率对锆薄膜表面形貌和结构的影响[J]. 材料研究学报, 2015, 29(6): 475-480. [2] 郑三龙, 陈冰冰, 张玮, 高增梁. 挤压AZ31B镁合金圆棒不同取向的疲劳裂纹扩展*[J]. 材料研究学报, 2013, 27(4): 360-366. [3] 郭建设 赵倩 侯晓光 房灿峰 张兴国. 电磁搅拌频率对Pb--Sn过共晶合金凝固组织的影响[J]. 材料研究学报, 2012, 26(3): 267-273. Viewed Full text Abstract Cited   Shared      Discussed