Chin J Mater Res  1994, Vol. 8 Issue (5): 403-405    DOI:

Current Issue | Archive | Adv Search |

THE VARIATION OF ULTRASONIC ATTENUATION IN Al-Cu ALLOY DURING PUSH-PULL FATIGUE PROCESS

KUANG Guokui; ZHU Zhengang; FEI Guangtao (Laboratory of Internal Friction and Defects in Solids;Institute of Solid State Physics; Academia Sinica)

KUANG Guokui; ZHU Zhengang; FEI Guangtao (Laboratory of Internal Friction and Defects in Solids;Institute of Solid State Physics; Academia Sinica). THE VARIATION OF ULTRASONIC ATTENUATION IN Al-Cu ALLOY DURING PUSH-PULL FATIGUE PROCESS. Chin J Mater Res, 1994, 8(5): 403-405.

Abstract References Related Articles Recommended Metrics Download:  PDF(265KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The authors measured the change of ultrasonic attenuation in Al-0.021wt% Cu alloy during push-pull fatigue process and obtained a result different from that of other researchers, and explained this change with the movement of bowing, returning and slippin Key words:  ultrasonic attenuation      free dislocation segment      bowing      slip      Received:  25 October 1994      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1994/V8/I5/403 1GremaudG,BujardM,BenoitW．J．Appl．Phys,1987;61:52哈宽富．金属力学性质的微观理论．207—2123朱震刚,周星,费广涛,仪器仪表学报,1988;9:39 [1] WU Congqian, REN Ruiming, LIU Pengtao, CHEN Chunhuan, ZHAO Xiujuan. Cavitation Erosion of 304 Stainless Steel induced by Caviting Water Jet[J]. 材料研究学报, 2016, 30(6): 473-480. [2] LIU Huaqiang TANG Di CAI Qingwu MENG Qiang. Deforming Texture and Deformation Mechanism of Coordination of AZ31 Magnesium Alloy Sheets[J]. 材料研究学报, 2012, 26(3): 231-239. [3] Zhongwen ZhAO Mingjiu RONG Lijian. Study on Behaviors of Hydrogen-induced Fracture of Precipitation Strengthened Austenitic Alloy[J]. 材料研究学报, 2012, 26(2): 113-118. [4] MENG Jie JIN SUN Xiaofeng HU Zhuangqi. Compression Deformation of a Nickel-Base Single Crystal Superalloy of Different Orientations[J]. 材料研究学报, 2011, 25(4): 355-361. [5] TAN Xiaoli(Northwesters Polytechnical University)GU Haicheng(Xi'an Jiaotong University). PLASTIC DEFORMATION AND FATIGUE MECHANISM OF hcp METALS[J]. 材料研究学报, 1996, 10(6): 569-579. [6] XU Dongsheng;LI Dong;HU Zhuangqi(Institute of Metal Research;Chinese Academy of Sciences). ELECTRONIC STRUCTURE AND MECHANICAL BEHAVIOUR OF Ti_3Sn AND Ti_3Sn-Nb[J]. 材料研究学报, 1993, 7(6): 497-501. [7] WANG Yandong YANG Wangyue SUN Zuqing CHEN Guoliang (University of Science and Technology Beijing)ZHU Dong (Central Iron and Steel Research Institute;Ministry of Metallurgical Industry). STUDY ON THE CRACK PROPAGATION FOR ALLOYS BASED ON INTERMETALLIC Ti_3Al AND Ni_3Al[J]. 材料研究学报, 1993, 7(4): 284-290. [8] FEI Guangtao;ZHU Zhengang(Laboratory of Internal Friction and Defects in Solids;Institute of Solid State Physics;Academia Sinica). EXPERIMENTAL STUDY ON THE EARLY STAGE OF FATIGUE CYCLING FOR PURE ALUMINIUM[J]. 材料研究学报, 1992, 6(6): 498-502. [9] FEI Guangtao;ZHU Zhengang(Laboratory of Internal Friction and Defects in Solids;Institute of Solid State Physics;Academia Sinica). INFLUENCE OF SOLUTE ATOMS IN DILUTE ALUMINIUM ON THE EARLY STAGE OF FATIGUE[J]. 材料研究学报, 1992, 6(6): 503-506. [10] JIANG Daming HONG Bande LEI Tingquan (Harbin Institute of Technology). THE MICROSTRUCTURE AND DEFORMATION MECHANISMS OF AN Al-Mg-Si ALLOY[J]. 材料研究学报, 1991, 5(2): 138-142. [11] YAO Daping ZHANG Yun HU Zhuangqi LI Yiyi (Institute of Metal Research;Academia Sinica). GRAIN BOUNDARY FRACTURE IN Al-Li ALLOY[J]. 材料研究学报, 1991, 5(2): 143-146. [12] XU Wenying ZHOU Jing HU Siankai (University of Science and Technology of China). ULTRASONIC ATTENUATION AND VELOCITY ON POLYMERS[J]. 材料研究学报, 1989, 3(3): 280-284. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed