|
|
|
| STUDY ON THE WEAR PERFORMANCES OF CERAMIC TOOLS FOR MACHINING 304 STAINLESS STEEL |
| ZHUANG Daming ;LIU Jiajun; ZHU Baoliang ;LUO Zhenbi; MIAO Hezhuo (Tsinghua University) |
|
Cite this article:
ZHUANG Daming ;LIU Jiajun; ZHU Baoliang ;LUO Zhenbi; MIAO Hezhuo (Tsinghua University). STUDY ON THE WEAR PERFORMANCES OF CERAMIC TOOLS FOR MACHINING 304 STAINLESS STEEL. Chin J Mater Res, 1997, 11(2): 163-168.
|
|
|
Abstract The cutting experiments of four tools, whose materials were St3N4--based ceramics (FD03),Ti(CN)-based ceramics(FD22), YT15 cemented carbide, and high speed steel(HSS), respectively, to 304 stainless steel were carried out on a lathe. The cutting performan
|
|
Received: 25 April 1997
|
1.M.P.Boron, M.Lee, Advanced Ceramic Materials,1(4), 335(1993)
2.Young-Wook Kim, June-Gunn Lee, Journal of American Ceramic Society. 72(8), 133(1989)
3.R.A.Cutier, A.C.Hurford, Material Science and Engineering. 105/ 106A, 183(1988)
4.Ki-Woong Chae,Doh-Yeon Kim,Journal of American Ceramicsociety.76(7),18857(1993)
5.J S Cho,S.W am, J S Chun, Journal of Material Science 17(9) 2495(1982)
6.李沐山 稀有金属与硬质合金 11(2),39(1992)
7.金卓仁 机械工程材料.86(6),1(1991)
8.刘家浚.材料磨损原理及其耐磨性(清华大学出版社,北京,1993)p.270
9.S.F.Wayne,S.T.Buljan,Journal of American Ceramic Society.72(5),754(1989)
10.S.F.Wayne, S TBuljan, Trbiology Transactions. 33(4), 618(1990) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
