|
|
|
| Evolution of Radial Texture and Microhardness of Cu-Nb Composite Wires |
Liping DENG1,**( ),Yueming LIU1,Jierui YANG1,Bingshu WANG2,Xiaofang YANG3 |
1. School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China
2. College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China
3. College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China |
|
Cite this article:
Liping DENG, Yueming LIU, Jierui YANG, Bingshu WANG, Xiaofang YANG. Evolution of Radial Texture and Microhardness of Cu-Nb Composite Wires. Chinese Journal of Materials Research, 2016, 30(11): 848-854.
|
|
|
Abstract The evolution of radial texture and microstructure of Cu-Nb microcomposite wires was investigated using scanning electron microscopy with electron back-scattering diffraction. Cu matrix shows a major <111> fiber texture, and the intensity of which increases from the surface to the center; Nb phase, however, shows a major <110> fiber texture without significant change in the intensity along the radial direction. The microhardness is determined by both the interface area density and <111>Cu texture. The texture hardening is the dominant influence on the change of radial microhardness.
|
|
Received: 12 January 2016
|
| Fund: *Supported by National Natural Science Foundation of China Nos. 51301040 & 51601039, the Science and Technology Fund from Fujian Education Department No. JA15072, Natural Science Foundation of Fujian Province No. 2016J05119, and Opening Measuring Fund of Precious Instruments and Equipments of Fuzhou University No. 2016T029. |
| 1 | L. Thilly, F. Lecouturier, J. von Stebut, Size-induced enhanced mechanical properties of nanocomposite copper/niobium wires: nanoindentation study, Acta Mater., 50(20), 5049(2002) | | 2 | V. Vidal, L.Thilly, S. Van Petegem, U. Stuhr, F Lecouturier., P. O. Renault, H. Van Swygenhoven, Plasticity of nanostructured Cu-Nb-based wires: Strengthening mechanisms revealed by in situ deformation under neutrons, Scri. Mater., 60(3), 171(2009) | | 3 | H. R. Z.Sandim, M. J. R. Sandim, H. H. Bernardi, J. F. C. Lins, D. Raabe, Annealing effects on the microstructure and texture of a multifilamentary Cu-Nb composite wire, Scri. Mater., 51(11), 1099(2004) | | 4 | L. Deng, X. Yang, K. Han, Y. Lu, M. Liang, Q. Liu, Microstructure and texture evolution of Cu-Nb composite wires, Mater. Character., 81, 124(2013) | | 5 | S.C.V.Lim, A.D. Rollett, Length scale effects on recrystallization and texture evolution in Cu layers of a roll-bonded Cu-Nb composite, Mater. Sci. Eng. A, 520(1-2), 189(2009) | | 6 | WU Ximao, HE Zhenghua, LI Chunhe, LIU Jinlong, ZHANG Fang, SHA Yuhui, Evolution of drawing texture for A6 aluminum conductor, Chin. J. Mater. Res., 29(7), 555(2015) | | 6 | (吴细毛, 和正华, 李春和, 柳金龙, 张芳, 沙玉辉, 在A6电工铝导线的冷拉拔过程中织构的演变, 材料研究学报, 29(7), 555(2015)) | | 7 | CONG Fuguan, ZHAO Gang, TIAN Ni, LI Ruifeng, Inhomogeneity of properties of 7150-T7751 aluminum alloy thick plate, Chin. J. Mater. Res., 27(2), 144(2013) | | 7 | (丛福官, 赵刚, 田妮, 李瑞锋, 7150-T7751铝合金厚板性能的不均匀性, 材料研究学报, 27(2), 144(2013)) | | 8 | YAO Xusheng, LIU Yandong, ZUO Liang, On the radial distribution of cold deformation textures of pure copper wire, J. Northeast. Univ., 29(3), 332(2008) | | 8 | (姚旭升, 刘沿东, 左良, 冷变形织构沿纯铜线材径向分布的研究, 东北大学学报, 29(3), 332(2008)) | | 9 | K. Han, A. A. Vasquez, Y. Xin, P. N. Kalu, Microstructure and tensile properties of nanostructured Cu-25wt%Ag, Acta Mater., 51(3), 767(2003) | | 10 | LIANG Ming,Study on fabrication and properties of CuNb(Sn)materials for high field magnet,Doctoral dissertation, Northwestern Polytechnical University(2009) | | 10 | (梁明, 强磁场用铜铌(锡)材料的制备及性能研究,博士学位论文, 西北工业大学(2009)) | | 11 | DENG Liping, Research on texture evolution,mechanical and electrical properties of Cu-Nb composite wires,Doctoral dissertation,Chongqing University(2014) | | 11 | (邓丽萍, Cu-Nb复合线材微观组织演变及力学和电学性能的研究,博士学位论文, 重庆大学(2014)) | | 12 | ZHANG Guoding, CHEN Yu LIU Cheng, The heterogeneity of mechanical properties in the microzone of metal matrix composites, Chin. J. Mater. Res., 11(1), 21(1997) | | 12 | (张国定, 陈煜, 刘澄, 金属基复合材料微区力学性能的不均匀现象, 材料研究学报, 11(1), 21(1997)) | | 13 | Dierk Raabe, Pyuck-Pa Choi, Yujiao Li, Aleksander Kostka, Xavier Sauvage, Florence Lecouturier, Kazuhiro Hono, Reiner Kirchheim, Reinhard Pippan, David Embury, Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials, MRS Bull., 35(12), 982(2010) | | 14 | N. Jia, F. Roters, P. Eisenlohr, D. Raabe, X. Zhao, Simulation of shear banding in heterophase co-deformation: Example of plane strain compressed Cu-Ag and Cu-Nb metal matrix compositesm, Acta Mater, 61(12), 4591(2013) | | 15 | L. Deng, K. Han, B. Wang, X. Yang, Q. Liu, Thermal stability of Cu-Nb microcomposite wires, Acta Mater, 101, 181(2015) | | 16 | YAO Xusheng, LIU Yandong, ZUO Liang, Quantitative texture analysis of cold drawn pearlitic steel wires, Iron and steel, 43(3), 65(2008) | | 16 | (姚旭升, 刘沿东, 左良, 冷拔珠光体钢丝帘线中织构演变的定量研究, 钢铁, 43(3), 65(2008)) | | 17 | V. Vidal, L. Thilly, Effects of size and geometry on the plasticity of high-strength copper/tantalum nano?lamentary conductors obtained by severe plastic deformation, Acta Mater., 54, 1063(2006) | | 18 | S. Kim, C. Choi, D. Lee, Deformation and annealing textures of drawn aluminum bronze wires, Mater. Sci. Forum, 408, 913(2002) | | 19 | D. N. Lee, Effect of stacking fault energy on evolution of recrystallization textures in drawn wires and rolled sheets, Mater. Sci. Forum, 495, 1243(2005) | | 20 | CHEN Jian, YANWen, CHEN Shaokai, WANG Xueyan, PENG Yuli, FAN Xinhui, Substructure formed in cold drawn processing for single crystal cooper wires, Rare Metal Mater. Eng., 36(11), 1896(2007) | | 20 | (陈建, 严文, 陈绍楷, 王雪艳, 彭渝莉, 范新会, 单晶铜线材在冷拔过程中形成的亚结构, 稀有金属材料与工程, 36(11), 1896(2007)) | | 21 | S. Li, S. He, A.V. Bael, FEM-aided Taylor simulations of radial texture gradient in wire drawing, Mater. Sci. Forum, 408, 439(2002) | | 22 | J. Chen, W. Yan, W. Li, J. Miao, X. Fan, Texture evolution and its simulation of cold drawing copper wires produced by continuous casting, Trans. Nonferrous Met. Soc. China, 21, 152(2011) | | 23 | M. H. Yoo, C. T. Wei, Slip modes of hexagonal-close-packed metals. J. Appl. Phys., 38(11), 4317(1967) | | 24 | Werner Skrotzki, Nils Scheerbaum, Carl-Georg Oertel, Roxane Arruffat-Massion, Satyam Suwas, La′szlo′S. To′th, Microstructure and texture gradient in copper deformed by equal channel angular pressing, Acta Mater., 55, 2013(2007) | | 25 | C. X. Huang, K. Wang, S. D. Wu, Z. F. Zhang, G. Y. Li, S. X. Li, Deformation twinning in polycrystalline copper at room temperature and low strain rate, Acta Mater., 54, 655(2006) | | 26 | L. Deng, K. Han, K. T. Hartwig, T. M.Siegrist, L. Dong, Z. Sun, X. Yang, Q. Liu, Hardness, electrical resistivity, and modeling of in situ Cu-Nb microcomposites, J. Alloys Compd., 602(0), 331(2014) | | 27 | K. R. Karasek, J. Bevk, High temperature strength of in situ formed Cu-Nb multifilamentary composites, Scrip. Metall., 13(4), 259(1979) |
|
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
