Effect of Cold Rolling on the Structure and Properties of 301(15Cr17Ni7) Containing Mo Stainless Steel

Chin J Mater Res

2010, Vol. 24

Issue (3): 278-282 DOI:

论文

Current Issue | Archive | Adv Search

Effect of Cold Rolling on the Structure and Properties of 301(15Cr17Ni7) Containing Mo Stainless Steel

CHEN Bo, GAO Ming, MA Yingche, ZHAO Xiujuan, LIU Kui

Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016

Cite this article:

CHEN Bo GAO Ming MA Yingche ZHAO Xiujuan LIU Kui. Effect of Cold Rolling on the Structure and Properties of 301(15Cr17Ni7) Containing Mo Stainless Steel. Chin J Mater Res, 2010, 24(3): 278-282.

Download:

PDF(861KB)
Export: BibTeX | EndNote (RIS)

Abstract

This article investigates the effect of various degrees of plastic deformation introduced by cold rolling at ambient temperature on the tensile properties of 301 stainless steel containing 0.8% Mo. The results indicate that the formation of strain-induced martensite evidently leads to a significant strengthening of the steel. The tensile and yield strengths as well as hardness increase linearly with the increase of cold rolling reduction. After 52% rolling reduction, the amount of martensite is about 75%, and the tensile strength is elevated to be about 1700 MPa. The addition of 0.8% Mo has a slight effect on tensile and yield strengths, but the plasticity is not decreased.

Key words: Austenitic stainless steel, AISI 301, Cold rolling, Tensile property, Microstructure

Received: 20 October 2009

ZTFLH:

TG113

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	CHEN Bei
	MING -Gao

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2010/V24/I3/278

1 S.G.Chowdhury, S.Das, P.K.De, Cold rolling behaviour and textural evolution in AISI 316L, Acta Materialia, 53, 3951(2005)
2 B.R.Kumara, A.K.Singh, B.Mahato, P.K.De, N.R.Bandyopadhyay, D.K.Bhattacharya, Deformationinduced transformation textures in metastable austenitic stainless steel, Mater. Sci. Eng. A, 429, 205(2006)
3 V.Tsakiris, D.V.Edmonds, Martensite and deformation twinning in austenitic steels, Mater. Sci. Eng. A, 273-275, 430(1999)
4 V.Mertinger, E.Nagy, F.Tranta, J.Solyom, Strain-induced martensitic transformation in textured austenitic stainless steels, Mater. Sci. Eng. A, 481-482, 718(2008)
5 M.Milad, N.Zreiba, F.Elhalouani, C.Baradai, The effect of cold work on structure and properties of AISI 304 stainless steel, J. Mater. Proc. Tech., 203, 80(2008)
6 S.M.Tavres, D.Gunderov, V.Stolyarov, J.M.Neto, Phase transformation induced by severe plastic deformation in the AISI 304L stainless steel, Mater. Sci. Eng. A, 358, 32(2003)
7 K.G.Brickner, Stainless steels for room and cryogenic temperatures in selection of stainless steels, American Society for Metals (Metals Park, Ohio, 1968)p.24
8 LIU Wei, LI Qiang, JIAO Dezhi, ZHENG Yi, LI Guoping, Deformation and strain hardening behaviors of austenitic cold rolled 301L stainless steels, Acta Metall. Sin., 44, 775(2008)
(刘伟, 李强, 焦德志, 郑毅, 李国平, 冷轧301L奥氏体不锈钢的变形和应变硬化行为, 金属学报, 44, 775(2008))
9 LU Shiying, ZHANG Tingkai, YANG Changqiang, KANG Xifan, WANG Xi, Stainless Steels (Beijing, Atomic Energy Press, 1995) p.198
(陆世英, 张廷凯, 杨长强, 康喜范, 王熙, 不锈钢 (北京, 原子能出版社, 1995) p.198)
10 L.Peguet, B.Malki, B.Baroux, Influence of cold working on the pitting corrosion resistance of stainless steels, Corr. Sci., 49, 1933(2007)
11 M.Amitava, P.K.Srivastava, P.K.Bhattacharya, D.K.Jiles, Ferromagnetic properties of deformation-induced martensite transformation in AISI 304 stainless steel, Metall. Trans., 35A, 599(2004)
12 J.P.Bressanelli, A.Moskowitz, Effect of strain rate, temperature and composition on tensile properties of metastable austenitic stainless steels, Trans. ASM, 59, 223(1966)
13 G.L.Huang, D.K.Matlock, G.Krauss, Martensite formation, strain rate sensitivity, and deformation behavior
of type 304 stainless steels sheet, Metall. Trans., 20A, 1239(1989)
14 R.G.Davies, C.L.Magee, Influence of austenite and martensite strength of martensite morphology, Metall. Trans., 2, 1939(1971)
15 WANG Lipin trans., Source Book on Stainless Steels (Taiyuan Steel Company, 1985) p.15
(王丽萍译, 不锈钢资料手册, 上册(太原钢铁公司编译, 1985年) p.15)

[1]	LIU Yongqin JIE Wanqi WANG Shanna LUO Haijun. Investigation of Rotary Bending Gigacycle Fatigue Properties of Al–7Si–0.3Mg Alloys[J]. 材料研究学报, 2012, 26(3): 284-288.
[2]	GUO Jianshe ZHAO Qian HOU Xiaoguang FANG Canfeng ZHANG Xingguo. Effects of Electromagnetic Stirring Frequency on the Solidification Structure of Pb–Sn Hypereutectic Alloy[J]. 材料研究学报, 2012, 26(3): 267-273.
[3]	MA Yunzhu LI Yongjun LIU Wensheng HUANG Guoji. Effects of Multiple Reflows on Microstructure and Shear Properties of In3Ag Solder[J]. 材料研究学报, 2012, 26(3): 321-326.
[4]	DU Lei YAN Hong. Effect of Isothermal Heat-treated on the Microstructure of ZA61 Rare Earth Magnesium Alloy[J]. 材料研究学报, 2012, 26(2): 169-174.
[5]	GAO Fei LIU Zhenyu WANG Guodong. Evolution of Through-Thickness Texture in Ultra–low C, N 17%Cr Ferritic Stainless Steel during Warm Rolling[J]. 材料研究学报, 2011, 25(5): 469-475.
[6]	ZHANG Xiaoqiang WANG Dong ZHANG Jian LOU Langhong. Effect of Strain Rate on the Low Cycle Fatigue Properties of Re-free Nickel-base Single Crystal Superalloy[J]. 材料研究学报, 2011, 25(3): 231-236.
[7]	TANG Chunjuan YANG Huiqin ZHANG Yongsheng SU Jianfeng. Synthesis of Bi Nanowires and Nanoplates[J]. 材料研究学报, 2011, 25(3): 273-277.
[8]	WANG Yu LEI Baoling HE Lianlong YI Maozhong. Study on the Microstructure of C/C Composite Brakes Worn Surface[J]. 材料研究学报, 2010, 24(5): 471-477.
[9]	WANG Fuqiang WANG Lei LIU Yang FENG Hui WANG Peng. Fracture Toughness and Fracture Behavior of GH690 Alloy at Different Temperatures[J]. 材料研究学报, 2010, 24(3): 299-304.
[10]	DONG Jie CHEN Xuedong FAN Zhichao JIANG Huifeng JIANG Heng LU Shouxiang. High temperature fatigue creep behavior and life prediction of 316L stainless steel under 2-step load[J]. 材料研究学报, 2009, 23(5): 541-545.
[11]	Xiao Xuan Guo Jianting Liu Yang Zhao Haitao. Effect of liquid metal cooling on microstructures of directionally solidified NiAl–Cr(Mo)–Hf(Ho) alloy[J]. 材料研究学报, 2009, 23(4): 437-443.
[12]	GUAN Jie LIU Jianrong LEI Jiafeng LIU YuYin. The relationship of heat treatment--microstructures--mechanical properties of the TC18 titanium alloy[J]. 材料研究学报, 2009, 23(1): 77-82.
[13]	SONG Jianyu ZHAO Xiang GONG Minglong WANG Shoujing ZUO Liang. Influence of cooling rates on the morphology of pearlite in Fe--0.12%C alloy under high magnetic field[J]. 材料研究学报, 2009, 23(1): 49-53.
[14]	ZHAO Liang　LIU Jianrong　WANG Qingjiang　YANG Rui　. Effect of precipitates on the high temperature creep and creep rupture properties of Ti60 alloy[J]. 材料研究学报, 2009, 23(1): 1-5.
[15]	YAO shengjie; DU Linxiu; LIU Xianghua; WANG Guodong. Transient microstructure after large deformation at two-phase region of ultra-fine grained austenite[J]. 材料研究学报, 2008, 22(6): 572-576.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed