Chin J Mater Res  1997, Vol. 11 Issue (4): 375-380    DOI:

论文 Current Issue | Archive | Adv Search |

FINITE ELEMENT SIMULATION OF SUPERPLASTIC BULGING WITH A DIE UNDER DIFFERENT PRESSURE MODES

LI Yuanchun; JIN Jing (Beijing Institute of Aeronautical Materials)LI Miaoquan; WU Shichun (Northwestern Polytechnical University)

LI Yuanchun; JIN Jing (Beijing Institute of Aeronautical Materials)LI Miaoquan; WU Shichun (Northwestern Polytechnical University). FINITE ELEMENT SIMULATION OF SUPERPLASTIC BULGING WITH A DIE UNDER DIFFERENT PRESSURE MODES. Chin J Mater Res, 1997, 11(4): 375-380.

Abstract References Related Articles Recommended Metrics Download:  PDF(411KB)  Export:  BibTeX | EndNote (RIS)       Abstract   The optimum pressure norm in superplastic bulging with a die is determined by tracing the element with the largest strain rate and maintaining the strain rate at the optimum value, and the bulging processes under two kinds of pressure modes including cons Received:  25 August 1997      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1997/V11/I4/375 1.宋玉泉,赵军吉林工业大学学报, 3(3),262(1985) 2. Yuquan Song,Jun Zhao.Mater.Sci.Eng,86,179(1987) 3. 李园春,杜志孝,吴诗. 兵器材料科学与工程,18(3),39(1995) 4.S.Kobayashi, S.Oh,T.Altan,Metal Forming and the Finite Element Method (Oxfor University Press, New York,1989)p.120 5.杜志孝,李森泉,吴诗. 应用数学和力学,17(2),127(1996) No related articles found! No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed